Buy neurosurgery supplies

Endo GIA Curved Tip Articulating Reload tape for cutting and anastomosis with Tri-Staple technology in all sizes

12

Female

- Material: 48 titanium pins - Size: length 30mm, pin height 2.0mm- 2.5mm- 3.0mm. - I-shaped bar design - Technical characteristics: - Curved endoscopic stapler has 3 rows of different height staples on each side, staple height from inside to outside is: 2.0mm; 2.5mm; 3.0mm. Staple height when closed: 0.75mm;1.0mm;1.5mm. - Fixed anvil bar - Standard B-shaped staples, Tri-Staple technology, target tissue closure range 0.88mm - 1.5mm. -Compatible with straight laparoscopic surgery suture tools with reusable battery and same brand - Standards: ISO, CE, CFG

Tra Vinh General Hospital

Endoscopic stapler with tristaple technology has 3 rows of staples of different heights on each side, staple height from inside to outside is: 3.0mm; 3.5mm; 4.0mm, staple length 45mm.

24

Female

- Material: 66 titanium pins - Dimensions: length 45mm, pin height 3.0mm- 3.5mm- 4.0mm. - I-shaped bar design - Technical characteristics: - Laparoscopic stapler has 3 rows of different height staples on each side, staple height from inside to outside is: 3.0mm; 3.5mm; 4.0mm. Staple height when closed: 1.25mm; 1.5mm; 1.75mm. - Fixed anvil bar - Standard B-shaped staples, Tri-Staple technology, target tissue closure range 1.5mm - 2.25mm. -Compatible with straight laparoscopic surgery suture tools with reusable battery and same brand - Standards: ISO, CE, CFG

Tra Vinh General Hospital

TristaLle technology endoscopy has 3 different height pins on each side, the height pin from the inside out is: 3.0mm; 3.5mm; 4.0mm, 60mm pin length.

48

Female

- Material: 90 titanium pins - Size: length 60mm, pin height 3.0mm- 3.5mm- 4.0mm. -I-shaped bar design - Technical characteristics: - Laparoscopic stapler has 3 rows of staples of different heights on each side, staple height from inside to outside is: 3.0mm; 3.5mm; 4.0mm. Staple height when closed: 1.25mm; 1.5mm; 1.75mm. - Fixed anvil bar - Standard B-shaped staples, Tri-Staple technology, target tissue closure range 1.5mm - 2.25mm. - Cutting pin length greater than or equal to 55mm -Compatible with straight laparoscopic surgery suture tools with reusable battery and same brand - Standards: ISO, CE, CFG

Tra Vinh General Hospital

Ball pump set

500

Female

Balloon pump set: can handle high pressure, volume 20ml, pressure 30atm - Material made of Polycarbonate - Attached accessories: Hemostatic valve, insertion device, torque, 3-way lock, extension tubing, prime lock, etc. FDA standards

Tra Vinh General Hospital

Ball pump set

500

Set

Material: Polycarbonate. Pressure gauge material: Brass Nylon. Fluorescent watch face allows viewing in dark conditions, pressure release lock lever, pressure connection cord with 360 degree swivel lock, Detachable. Maximum pressure 30 Atm, Volume 25 ml. Comes with Y-valve for hemostatic combination opening and closing, large diameter 10Fr, guide wire driver, pusher. Manufacturer standards: ISO, CE. Origin: G7

Tra Vinh General Hospital

High pressure balloon pump set with three pin, Y-shaped connector

30

Female

Polycarbonate material. Pressure 30 atm. Capacity: 25 ml. FDA standards.

Tra Vinh General Hospital

Set of steel threads to close the sternum

5

Set

*Steel thread set for sternum No. 7 * Stainless steel material, suitable needle size for sternum closure and abdominal wall surgery

Tra Vinh General Hospital

3-round foreign object catching kit

2

Female

Set includes: Three Nitinol cables twisted together, There is a Platinum strip tightly linked to the Loops to increase recognition. Super elastic Nitinol wire is flexible and has good torsion resistance. Working sizes 6-10mm, 9-15mm, 12-20mm,... Catheter length 100cm, Snare length 120cm. FDA standards

Tra Vinh General Hospital

Set of tools to help open access to blood vessels of all sizes

100

Set

The set of tools to open access to the radial and femoral vessels includes: Vascular dilation tube (Dilator); Sheath introducer, Mini guidewire, Vascular puncture needle, Dimensions: 5 F; 6F; 7F; 8F; 9F, Length: 11 cm

Tra Vinh General Hospital

Thrombotic suction kit

20

Female

Thrombectomy kit: with interwoven fiber structure, stylet shaft design Radiopaque marking at the distal end, shaft length 140cm, tip length 6mm, hydrophilic coating ≥ 40cm long. Size: 6F. Inner diameter 1.00mm and distal lumen area is 0.78 mm², included tools: 30ml syringe with lock, connecting wire with lock 2 pm, washing equipment, 70µm filter membrane

Tra Vinh General Hospital

Thrombotic suction kit

20

Female

Thrombectomy kit size 6F. 5.2F catheter with a maximum outside diameter of 0.068''. Has a stainless steel braided border. Tapered tip. Used for blood vessels with diameter ≥2.0mm. Catheter length: 140 cm. The hydrophilic segment is 20cm long. Markers made of Platinum / Iridium material. Minimum compatible guiding catheter inner diameter: 0.070". Compatible guide wire: 0.014". There is a 12 cm long Rapid Exchange head to guide the 0.014" guide wire. Supplied with: 2 30 ml suction syringes, 1 4 ml flushing syringe, 1 coagulation and storage tray holding up to 60 ml of solution and 2 70 micron filters, 1 tubing: 21.5 cm with stopcock lock. Meets FDA standards.

Tra Vinh General Hospital

Vascular opening kit,

1.000

Set

Description: Arterial access opening kit includes: guide wire 0.025", 0.035" long ≥ 45cm, angioplasty needle 18G or 20G, syringe ≥ 2.5ml, Introducer sheath, dilation rod, skin incision knife, etc. Size: Diameter 4Fr to 8Fr, length 7cm-10cm. Technical standards: cross-cut hemostatic valve, Dilator made of polypropylene, Sheath made of ETFE

Tra Vinh General Hospital

Radial artery access kit

400

Female

Radial artery access tool Material: Polyethylene and polypropylene, Hemostasis valve prevents blood leakage, Size: 4Fr to 6Fr, length 7cm-11cm depending on diameter, guide wire made of stainless steel, diameter 0.018" - 0.038", length 40cm -50cm, Angiography needle 18G x 7cm or 21G x 4cm, Lock 3 fall..Origin: countries in the bloc G7

Tra Vinh General Hospital

Disposable vein stripping kit

10

Set

Steel wire piece coated with tetrafluoroethylene/hexafluoropropylene (FEP) copolymer Handle Three (03) cutting heads with diameters of 9, 12 and 15 mm One (01) screw cap to attach the cutting heads Standards: ISO, CE, FDA

Tra Vinh General Hospital

3-Door Manifold Connector

700

Female

3-port Manifold, Poly Carbonate material. Inner diameter 0.093" There are 3 ports suitable for different uses, with rotating luer and rotating air discharge head. Withstands pressure of 200, 500 PSI (depending on product code), FDA standards

Tra Vinh General Hospital

1 chamber pacemaker

10

Female

IS-1 connection standard. MRI mode can be activated and deactivated using the handheld device. An MRI scan can be performed immediately after implantation. The AutoCapture pacing system allows for maximum response to pacing thresholds with the ability to confirm beat-by-beat pacing leads. The AutoCapture pacing system automatically generates a 5V backup pulse when conduction loss is detected, and can be programmed as either unipolar or bipolar. Stores the electrocardiogram inside the heart chamber for up to 14 minutes.

Tra Vinh General Hospital

2 chamber pacemaker

20

Female

Creates a dual-chamber pacemaker with rhythm response to movement. Allows 3T full-body MRI scan - no limit on scan time or patient height. Manages atrial and ventricular pacing, allowing programming of safe pacing amplitudes up to 4 times the pacing threshold. There is a function to suggest parameters to help program the machine appropriately for each patient. The frequency response to the magnet when the battery is remaining is 85 cycles/minute. Battery life up to 14.9 years.

Tra Vinh General Hospital

2 chamber pacemaker

20

Set

IS-1 connection standard. MRI mode can be activated and deactivated using the handheld device. An MRI scan can be performed immediately after implantation. The AutoCapture pacing system allows for maximum response to pacing thresholds with the ability to confirm beat-by-beat pacing leads. The AutoCapture pacing system automatically generates a 5V backup pulse when conduction loss is detected, and can be programmed as either unipolar or bipolar. Automatic feature set, Intrinsic Ventricular Conduction Priority, AF Suppression - Pacing to suppress atrial fibrillation and SenseAbility - Automatic sensing. There is a programmable atrial tachyarrhythmia alarm. Stores the electrocardiogram inside the heart chamber for up to 14 minutes

Tra Vinh General Hospital

HERA Manifold Dispenser

700

Female

3-port Manifold, 360 degree rotation, Luer male head for quick and accurate connection, transparent design can observe flow rate accurately -Poly Carbonate material. There is an opening and closing valve, maximum pressure of 500psi

Tra Vinh General Hospital

Hemostatic valve set has 02/03 connection ports with 30 and 40 degree angles (Y-Connector)

50

Set

There are 2 types: 02 and 03 ports, Length: 54, 80 and 78 mm, Angled ports: 30 and 40 degrees, Size: 9 Fr, Minimizes blood loss and retrograde bleeding, Material: Polycarbonate, Product set includes: 1 valve, 1 torque and 1 needle. Quality standards: ISO

Tra Vinh General Hospital

10ml syringe with luerlock tip used in vascular intervention

1.400

Female

10ml syringe with luerlock tip used in vascular intervention, material made of Poly carbonate, good pressure resistance, easy to see the flow and air bubbles inside, Fixxel male luer vortex tip Meets FDA standards.

Tra Vinh General Hospital

3ml syringe with luerlock tip used in vascular intervention

500

Female

3ml syringe with luerlock tip used in vascular intervention, material made of Poly carbonate with good pressure resistance, easy to see the flow and air bubbles inside, Fixxel male luer vortex tip Meets FDA standards.

Tra Vinh General Hospital

Aortic retrograde balloon pump, various sizes

10

Pieces

RX catheter system with 60cm long lumen enhances thrust for distal lesions. Z-Tip technology: tip length from 3 - 5 mm. Coating: Hydro-X (distal segment); Water resistant coating (inner tube), tip enty Profile, : 0.017", Crossing Profile: 0.039". Normal pressure 12 atm. Balloon rupture pressure is up to 22atm. Compatible wire: 0.014 inch. Balloon diameter from 1.5 - 6 mm. Balloon length from 15 - 240 mm. Tube length: 150 cm. Quality standards: ISO, CE. Origin: Europe

Tra Vinh General Hospital

Aortic counterpulsation balloon 7.5Fr

10

Female

Material: Polyurethane, Size: 7Fr, 8Fr, 9Fr, Balloon volume 30cc, 40cc, 50cc Center lumen diameter 0.027", Cardiothane II balloon membrane, Hydrophilic coating. Guidewire: 0.025", membrane length: 9.1", 10.2", 10.3'', balloon inflation size: 14mm, 15mm, 16mm

Tra Vinh General Hospital

Peripheral vascular intervention dilation balloon, diameter 3-12mm, length 20-300mm

2

Female

Peripheral angioplasty balloon. The ball uses guide wire 0.035. Compatible with 5F or 6F or 7F sheath. Dual Lumen tube design: Radiopaque marker: has 2 markers made of Platinum Iridium with injection molding technology (swaged -> zero profile). The ball has 6 folds, ball material: Flexitec Xtreme. The ball has a hydrophilic coating.

Tra Vinh General Hospital

Vascular intervention dilation balloon, diameter: 1.5mm-4mm, length: 20mm-220mm, system: 0.014".

5

Female

System Design: Over The Wire. Ball type: Controlled Compliance (3-sided stacking technique). Ball material: SCP (Semi-Crystalline Polymer). Coating: Hydrophilic. Ball diameter: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm. Ball length: 20mm, 40mm, 70mm, 100mm, 140mm, 180mm, 220mm. System length: 90cm, 120cm, 150cm. Marker: 2 stereotyped markers. Wiring system: 0.014". Certified: CFS, ISO.

Tra Vinh General Hospital

Vascular intervention dilation balloon, diameter: 3mm-10mm, length: 20mm-200mm, system: 0.035".

10

Female

System Design: Over The Wire. Ball shape: Controlled Compliance (5-sided folding technique helps the ball fold smaller). Ball material: SCP (Semi-Crystalline Polymer). Coating: Hydrophobic. Ball diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. Ball length: 20mm, 40mm, 60mm, 80mm, 100mm, 120mm, 150mm, 170mm, 200mm. System length: 80cm, 90cm, 130cm. Marker: 2 stereotyped markers. Maximum pressure: 20atm. Wiring system: 0.035". Certified: CFS, ISO.

Tra Vinh General Hospital

Vascular intervention dilation balloon, compatible with 0.018" guidewires

5

Female

Peripheral angioplasty balloon made of Pebax material with Hydrophilic Bioslide technology, compatible with 0.014"/0.018" guide wire There are 2 types: monorail and over-the-wire (catheter length 40, 80, 90, 135, 150 cm), comes with guidewire 0.014"/0.018" pressure from 6atm to 14atm, introducer sheath recommended 4F. Pebax ball material, hydrophilic coating on the ball. Diameter: 2.0mm -10.0mm, | length: 10mm - 220mm..

Tra Vinh General Hospital

Hot can balls vascular card, diameter: 2mm-7mm, length: 20mm- 200mm, system System: 0.018".

10

Female

System Design: Over The Wire. Ball shape: Controlled Compliance (5-sided folding technique helps the ball fold smaller). Ball material: SCP (Semi-Crystalline Polymer). Coating: Hydrophobic. Ball diameter: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 7mm. Ball length: 20mm, 40mm, 60mm, 80mm, 120mm, 150mm, 170mm, 200mm. System length: 90cm, 130cm, 150cm. Marker: 2 stereotyped markers. Wiring system: 0.018". Certified: CFS, ISO.

Tra Vinh General Hospital

Balloon angioplasty of femoral, below knee, popliteal, radius and humerus, balloon diameter 12-18mm

5

Female

System Design: Over The Wire. Ball shape: Non-Compliant (4-sided folding technique helps the ball fold smaller). Ball material: Co-Extruded. Coating: Hydrophilic Medi-Glide. Ball diameter: 12mm, 14mm, 16mm, 18mm. Ball length: 20mm, 40mm, 60mm. Body shaft length: 75cm, 120cm. Compatible conductor: 0.035". Maximum pressure: 8atm. Entry profile: 0.037". Certified: ISO..

Tra Vinh General Hospital

Peripheral artery ball

5

Female

Ball 0.035", Flexitec ball material - Sizes 3,4,5,6,7,8,9,10mm, length 20,40,60,80,120,150, 200,250, 300mm. Especially with size 12x20.40mm. Guide 5F-7F. - Unique with a length of up to 300mm, suitable for treating long lesions. - Soft ball, low profile but achieves high pressure of 11-12-14-15-16-17-18 bar. - Catheter system length 80cm and 130cm - Quality standards: ISO, CE.

Tra Vinh General Hospital

Peripheral artery ball

5

Female

High pressure peripheral angioplasty balloon 12,14,16,18, 19,20, 23,24 bar - Shelves 4,5,6,7,8,9,10, 12mm are 20,40,80,100mm long. - Catheter system length 40cm, 80cm and 135cm." - Quality standards: ISO, FDA.

Tra Vinh General Hospital

24atm high pressure peripheral angioplasty balloon, compatible with 0.035" guide wire

5

Female

High pressure peripheral angioplasty balloon, Nybax material, coated with Medi-glide lubricant. Input to lesion location: 0.040" (1.016mm). Diameter: 3mm - 12mm, length: 20mm - 200mm. Compatible with 0.035" wire, maximum pressure 24atm. There are 2 bands marked with Platinum Iridium..

Tra Vinh General Hospital

High pressure peripheral angioplasty balloon, diameter 4-12mm

5

Female

High pressure peripheral balloon dilation. The ball uses a 0.035" guide wire. Compatible with 6F, or 7F sheath. Ball burst pressure is up to 24atm.

Tra Vinh General Hospital

Paclitaxel coated angioplasty balloon, coating density: 3µg/mm², diameter: 2mm-7mm, length: 40mm-120mm, system: 0.018".

2

Female

Drug coating: Paclitaxcel (anti-proliferative) and butyryl-tri-hexyl citrate (BTHC) with Lux coating technology helps increase the efficiency of drug release into blood vessels, with a coating density of 3µg/mm². Ball diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm. Ball length: 40mm, 80mm, 120mm. System length: 90cm, 130cm, 150cm. Marker: 2 stereotyped markers. Wiring system: 0.018". Certified: CFS, ISO.

Tra Vinh General Hospital

High pressure a coronary heat

150

Female

High-pressure angioplasty balloon, made of non-expandable material, with Bi-Segment balloon carrier system. Hydrophilic coating reduces friction on the catheter body. Super small tip profile: 0.017", small Crossing profile: 0.031". . Ball diameter: 2.00mm, 6.00mm, Ball length: 6mm- 30mm, Maker made of Platinum. The product has CE and FDA certificates.

Tra Vinh General Hospital

High pressure a coronary heat

150

Female

High pressure angioplasty balloon. Diameter from 2.0mm to 4.5mm, length from 8mm to 25mm. Material: Nylon 12. Coating: hydrophilic up to 50cm on tube body 3-fold design, 30° conical ball tip design. Compatible with 0.014" guide wire and 5F catheter. Quality standards: ISO, CE

Tra Vinh General Hospital

High pressure a coronary heat

150

Box/pieces

2 layers of Hydrophilic ultrasonic coating on the outside and inside, 3-fold Nylon ball, Hypotube body design, Tip profile 0.016'', Two markers made of Pt/Ir material, Diameter: 2.0mm - 5.0 mm. Length: 6mm - 30mm, NP: 12atm; RBP: 22atm (2.0-4.0mm), 20atm (4.5-5.0mm), Standard: ISO 13485, CE.

Tra Vinh General Hospital

High pressure a coronary heat

150

Female

Compact ball design Z-tip technology with tapered tip, Nylon material. Ball body diameter 0.0336 inch, tip penetration cross section 0.0172 inch. Hydrophilic coating Hydro-X. Ball diameter: 1.75 – 5 mm. Ball length: 8 – 18 mm. Normal pressure is 12 atm, balloon burst pressure is 18 atm - 20 atm. Usable length of catheter 140cm. Number of balloon folds: 3- 5, Origin: European countries

Tra Vinh General Hospital

Polyamide high pressure angioplasty balloon

150

Female

Material: Polyamide, hydrophilic coating, radiopaque marked at both ends. Marker length 1.00mm, bell-shaped ball shoulder. Catheter length 143cm, proximal outer diameter 2.1F/0.69mm. Distal tip outer diameter: 2.45F/0.81mm, 2.5F/0.83mm, 2.6F/0.86mm, With depth markers 90cm and 100cm from the tip. Tip diameter 0.016 inch, compatible with 0.014 inch wire. Ball diameter from 2.50 - 4.5mm, ball length 8mm-15mm. Normal pressure is 12 Atm, balloon burst pressure is from 20 atm to 23 atm depending on diameter. Quality standards: ISO, Origin: G7 countries

Tra Vinh General Hospital

Normal pressure a coronary pressure

150

Female

Expandable angioplasty balloon made of OptiLEAP material, coated with Zglide hydrophilic layer with Bi-Segment balloon carrier system. Size: diameter: 1.2-4.0mm; Length: 8-30mm. Super small tip profile: 0.017", small Crossing profile: 0.026",. Maker made of Platinum. The product has CE and FDA certificates.

Tra Vinh General Hospital

Normal pressure a coronary pressure

150

Female

Used to dilate narrow segments of coronary arteries or bypass stenoses, Polyether block amide balloon material, Rapid Exchange design, semi-elastic balloon type, radiopaque marked with Platinum - Iridium material, 1.0mm long, super hydrophilic coating, Catheter length 143cm, . Crossing profile (3.0mm) 0.84mm. Tip diameter 0.39mm (0.015 inch). Normal pressure 6Atm, Ball burst pressure 14Atm. Standard: ISO 13485, Origin: G7 countries

Tra Vinh General Hospital

Normal pressure a coronary pressure

150

Female

Nylon material. Balloon body diameter 0.0216" - 0.0306", penetration cross section 0.0164". Hydrophilic coating. Balloon diameter: 1 - 4 mm. Balloon length: 5 - 30 mm. Normal pressure 6atm, balloon rupture pressure 14 atm - 16atm Available length of catheter: 140 cm. Number of balloon folds: 2-3.. Origin: Europe

Tra Vinh General Hospital

Normal pressure a coronary pressure

150

Female

Ball material: Grilamid L25. Ball head material: Pebax, 2 gold oil markers. Proximal body: AISI 304 coated stainless steel. Distal body: 3-layer polyamide combined body with reinforced inner lumen. Hydrophilic coating. Inlet size: 0.0158". Normal pressure (NP): 8 atm. Balloon burst pressure (RBP): 16 atm

Tra Vinh General Hospital

Normal pressure a coronary pressure

150

Box/pieces

2 layers of Hydrophilic ultrasonic coating on the outside and inside, Property pebax material ball with 2 folds, 3 folds, Hypotube body, Tip profile 0.016'', Two markers in Pt/Ir, Diameter: 1.0 mm - 4.0 mm. Length: 5mm - 30 mm, NP: 6 atm; RBP: 14atm, Standard: ISO 13485, CE.

Tra Vinh General Hospital

Coronent coronary ball has a knife

10

Female

The knife-shaped coronary intervention dilation balloon has a hydrophilic coating. The balloon has 3 or 4 stainless steel blades mounted along the outside surface of the balloon. Blade height 0.005'', blade length 8mm, Balloon diameter: 2.00mm -4.00mm, Platinum Irridium marker material 1mm, Damage contact diameter 0.017 inch, Balloon length: 6mm- 15mm, Nominal pressure 6atm, Balloon rupture pressure 12atm. CE, FDA standard standards

Tra Vinh General Hospital

Peripheral dilation balloon made of Nybax material, diameter 1.5-4mm, length 20-220mm, compatible with 0.014" guide wire

5

Female

Small-sized peripheral angioplasty balloon, Nybax material coated with hydrophilic Bioslide technology. “3 fold” design. Includes 2mm Platinum Iridium markers. Input to lesion site 0.017". Maximum pressure 14atm. Compatible wire 0.014". Diameter: 1.5mm - 4.0mm. Length: 40mm -220mm. Catheters come in two forms: monorail and OTW with lengths of 90cm and 150cm.

Tra Vinh General Hospital

Peripheral dilation balloon coated with 3.5mg/mm2 drug, compatible with 0.035" guide wire

2

Female

Special drug coating and drug release technology FreePAC, optimizes drug release time (30-60"). Flexitec xtreme ball material with 6 folds, Hydrophilic balance technique (lubrication, Urea conductor helps effectively control the drug release process. Ball uses Introducer sheath 5F or 6F, compatible with 0.035" wire - Ball has 2 markers.

Tra Vinh General Hospital

45 MHZ mechanical IVUS ultrasound probe

10

Female

Ultrasound probe with mechanical rotation mechanism at high frequency up to 45Mhz, with hydrophilic coating to enhance propulsion and control ability, probe 20.5mm from the tip, length of wire running in the shaft 15.5mm from the tip, radial diameter through the near and far body 3.0F, middle body 3.1F, effective length 135cm.

Tra Vinh General Hospital

Coronary and peripheral ultrasound probe

10

Female

Coronary and peripheral ultrasound probe. The probe is soft and pointed, with an outer diameter of 0.019" to help easily enter stents and clean difficult wounds. The distal shaft has a hydrophilic coating of ≥24cm, a useful length of 150cm, and has software that displays images of blood flow in the vessel, helping to evaluate the size of the vessel lumen and the degree of pressure on the vessel wall of the stent.

Tra Vinh General Hospital

Y-type Y-Star connector

200

Set

Y-Star connector is a press and screw type, valve inner diameter 9Fr, used in diagnostic imaging and vascular intervention procedures with a flexible connection port that helps attach additional connections for maximum support during surgery. Y-connector set includes: Y-connector, Torque, Needle 10cm long, Transmission line with luer lock has 03 ports, 25cm long, 02 flexible connection ports

Tra Vinh General Hospital

Male/male connector

700

Female

Male-male/female-female connector Material: Transparent polyethylene used to connect to high pressure measuring wire or infusion line during vascular intervention.

Tra Vinh General Hospital

Intervention wire (micro wire) used for CTO technique

30

Female

Multi-core conductor with ACT ONE technology (double helix design) increases tip durability, torque response and shock resistance. One-piece core single conductor. Tip load from 0.3 - 20 gf provides very good support for medical intervention cases. Coating: silicone, SLIP-COAT or SLIP-COAT on polymer base. Tip: straight, J, pre-shaped. Length: 180, 190, 300cm/330cm (RG3). Quality certification: ISO, CE.

Tra Vinh General Hospital

Soft interference conductor (microconductor).

30

Female

Multi-core conductor with ACT ONE technology (double helix design) increases tip durability, torque response and shock resistance. One-piece core single conductor. Coating: silicone or SLIP-COAT. Tip load: 0.5 gf, 0.7gf, 0.8 gf. Tip: straight, J. Diameter: 0.014 inches. Length: 180 cm / 150, 165 cm (extension wire). Quality certification: ISO, CE.

Tra Vinh General Hospital

Wires (microwires) provide peripheral intervention

20

Female

The wire has tip load from 1.0 g to 40 g, pointed or magnetic tip - Wire diameter 0.014inch, 0.018inch - One-piece core single conductor. - Multi-core conductor using ACT ONE technology increases torque transmission capacity and high tip durability, length 200cm, 235cm, 300cm - Coating: hydrophilic/hydrophilic on polymer base. - Quality standards: ISO, CE

Tra Vinh General Hospital

Hydrophilic coated vascular intervention guide wire diameter: 0.035"

50

Female

Vascular intervention guide wire coated with hydrophilic layer: Structure: Nitinol, Diameter: 0.035" length: 45cm - 180cm., There are 06 different tip types: Angled; Straight; 1.5J; 2.0J; 3.0J; Beak.

Tra Vinh General Hospital

Brain intervention wire with double helix structure

20

Female

ACTONE technology with double helix structure maintains tip shape, good torque response. SLIP-COAT, SLIP-COAT coating on polymer base 170cm -180cm long. Diameter: 0.008 inch -0.018 inch Available length: 200cm, 300cm. Tips: straight, round curver, angled. Quality standards: ISO, CE

Tra Vinh General Hospital

Coronary intervention conductor

100

Pieces/ yarn

1. Materials: Durasteel base material (equivalent or higher), full body polymer coating with hydrophilic layer 2. Size: Diameter: 0.014'', Length: 190cm or 300cm, Tip load: 1.5g; 2.7g; 4.1g. J-curved tip, straight tip, wire tip has radiopaque marker (Marker Band) to help feel the position of the guide wire on the path to the lesion.

Tra Vinh General Hospital

Coronary intervention conductor

100

Pieces/ yarn

Materials: Distal core made of ELASTINITE NITINOL, proximal core made of stainless steel, coated with durable hydrophilic and hydrophobic coating. Size: Diameter 0.014'', length 190cm or 300cm. J-curved head, straight head, durable, bearing 0.7g. The end of the wire has a radiopaque marker: 1.5mm.

Tra Vinh General Hospital

Runthrough type coronary intervention guide wire

1.400

Female

Coronary intervention guide wire, diameter 0.014" 180cm long. Length of the distal part with outer coil layer: 25cm, length of the radiopaque tip: 3cm. Materials: Core: Nickel-Titanium, the first part of the outer coil layer is made of Platinum, the back part of the coil layer is stainless steel. Origin: G7 countries

Tra Vinh General Hospital

Neurological intervention leads of all types and sizes

20

Female

Lead wire for cerebrovascular intervention, . Head diameter is approximately 0.014 inches. Length about ≥200 cm, the distal end has a 5cm long platinum spring coil, 38 cm long hydrophilic coating Material: stainless steel, hydrophilic. Packaging: 1 piece/box

Tra Vinh General Hospital

Diagnostic leads

30

Female

- 0.035" guide wire with flexible tip, tip load of 6.3 gf & tube body hardness of 3.6 N helps increase thrust. Nitinol core guide wire is easily opaque operation. Coating the outside of the conductor with a hydrophilic layer. - Tip shape: 1.5, 3, 6 J, straight, angle. - Available length: 50 - 180 cm. (Details of sizes)

Tra Vinh General Hospital

Coronary diagnostic guide wire 0.035"

700

Female

Material ; Stainless steel, Diameter 0.035" long ≥150 cm, Standard: ,ISO

Tra Vinh General Hospital

Coronary diagnostic guide wire sizes from 0.035" to 0.038",

700

Female

Diameter in many sizes: 0.035" - 0.038". Length: ≥150cm. Core made of stainless steel, coated with PTFE. Standard: FDA

Tra Vinh General Hospital

Hydrophilic coated vascular diagnostic guide wire is 260cm long

20

Female

Structure: Core is Nitinol material, super elastic alloy., Outer layer is Polyurethane, increased optical resistance with Tungsten layer.. Hydrophilic M coat coating, Head shape: curved tip (Straight, Angled). Dimensions: Lead length: 260 cm, Length of flexible tip: 3 cm, Diameter: 0.035'',....

Tra Vinh General Hospital

Coronary diagnostic leads of all sizes and hydrophilic types

200

Female

The core structure is a super-elastic alloy (Nitinol), the polyurethane outer layer is covered with a tungsten layer to increase radiopaque properties. The coronary angiography guide wire is coated with a hydrophilic layer of M Coat. diameter 0.035", curved end, straight end. Length 150cm. length of flexible end: 3cm,

Tra Vinh General Hospital

Angiography guide wire 0.035"-150cm, stainless steel, silicon coated, teflon

30

Female

- Material: stainless steel, silicon coating, teflon. - Smooth surface, easy to move inside the catheter as well as the blood vessel. - High optical resistance, no twisting during operation. - Diameter 0.035", length 150cm

Tra Vinh General Hospital

Ballooned electrode wires for temporary pacemakers

30

Female

The woven material is biocompatible, soft at body temperature and adapts to the endocardium. Latex balloon has a volume of up to 1.5 ml, the design of the balloon supports easy wire placement. Optional body size 5F. The first electrode is located at the far end of the electrode wire, the second electrode is about 1cm away from the first electrode. • Comes with needle, syringe, ECG adapter, Safety Adapter.

Tra Vinh General Hospital

Pressure gauges

1.400

Female

PVC material. The proximal end is a fixed male/female leur, the distal end is a fixed male. Length 30cm, 152cm. FDA standards

Tra Vinh General Hospital

FFR pressure measuring line, CFR flow measuring and IFR micro resistance measuring

10

Female

Coronary reserve pressure measurement leads IFR and FFR have hydrophilic coating and PTFE coating, probe position 3 cm from the tip, tip load 0.66, straight tip and J shape, effective length 185cm,300cm, diameter 0.014", flexible section length 30cm.

Tra Vinh General Hospital

High pressure wire

50

Female

Material: Polyurethane, luer lock connection port can withstand pressure up to 1200psi, length 30cm, 120cm

Tra Vinh General Hospital

Temporary pacing electrode with shade

30

Female

Temporary pacing bipolar wire with type 5F balloon, stainless steel material. Catheter made of Polyurethane (PUR), flexible, anti-thrombotic, non-toxic, Electrode prevents the formation of strong impulses, pin: 2mm gold-plated. Stimulating electrode 110 cm, Catheter has markers every 10 cm for positioning, electrode length: 5 mm, electrode distance: 10 mm.

Tra Vinh General Hospital

Peripheral circuit protection tools

5

Female

Material: filter mesh made of Nitinol, Full-Wall mesh weaving technique. The filter mouth has a round frame made of Gold - Tungsten material as a marker Profile: Conical filter wire attached, with guide and recovery catheter included. The system does not affect the flow during intervention at all. The system is suitable for both 0.014'' and 0.018'' conductors, filter diameter 3,4,5,6,7mm, push wire length 190cm - 320cm. CFS, ISO, CE certificates.

Tra Vinh General Hospital

Endo GIA Ultra Universal automatic anastomosis cutter used in laparoscopic surgery, capable of meeting a 45 degree angle with 5 angled points on each side and one point in the middle. Shaft length 16cm

10

Female

- Laparoscopic anastomosis suturing tools of all sizes: - Material: titanium pin - Dimensions: After installing the compatible staples, it can be folded at a total angle of 90 degrees on both sides, 45 degrees on each side with 5 folding points on each side and one point in the middle. Shaft length 16cm - Technical characteristics: Multi-purpose endoscopic anastomosis cutting tool, integrated with all types of endoscopic anastomotic cutting staples. types, sizes, TRI-STAPLER TECHNOLOGY - Compatible with radial curved staples and laparoscopic staplers with reinforced patches. - Standards: ISO, CE, CFG

Tra Vinh General Hospital

Pulse tools with self -consumption and double hemostatic mechanism

7

Female

The vascular closure device includes: 01 0.035'' or 0.038'' guide wire 70cm long, 01 dilator, 01 sheath. The vascular closure device uses a dual hemostatic mechanism with anchors inside the vessel and collagen outside the vessel, held by absorbable sutures to help fix the position where the vessel needs to be closed. Parts left in the body are bioabsorbable, absorbed within 60 - 90 minutes. day. Size: 6Fr and 8Fr

Tra Vinh General Hospital

The device opens the way into the radial artery with a hydrophilic layer and an ultra-thin wall

10

Female

Ultra-thin wall technology reduces the outer diameter of the sheath by 1Fr while still maintaining the same inner diameter as similar sheaths. Structure: - Angiography needle size: 20G x 51mm; 22G x 32mm - Mini guidewire plastic size 0.025" x 45cm; plastic 0.021" x 45cm; spring 0.018" x 45cm; - 10cm long Sheath coated with M Coat hydrophilic layer - Size: size 7Fr, 6Fr and 5Fr

Tra Vinh General Hospital

The device opens the way to the radial artery, has a hemostatic valve, and is coated with a hydrophilic layer

5

Female

Structure includes: - Threading needle size 20G x 11/4". - Mini guidewire plastic size 0.025" x 45cm or 0.025" x 80cm - 2.5ml syringe - Dilator (dilator) - Knife cuts the skin Characteristic: - "Cross-Cut" style hemostatic valve - Sheath is coated with M Coat hydrophilic layer, the resistance is only 1/2 that of regular sheath, reducing discomfort for the patient. - Size: diameter 5F-6F, length 10cm or 16cm

Tra Vinh General Hospital

Lubricating solution reduces friction for atheroma chipping drill bits

3

Female

Solution used in the atherosclerotic plaque scraping system in blood vessels. Ingredients: Olive oil, phospholipid, egg yolk, sodium deoxycholate, L-histidine, disodium EDTA, sodium hydroxide, water

Tra Vinh General Hospital

Flush device 3ml/hour

700

Female

Male head rotates Turn lock OFF, pressure 250 psi Speed ​​3ml/h.

Tra Vinh General Hospital

Neurological circuit holder

20

Female

Material: Nitinol, Size: Stent diameter 3mm - 6mm, stent length 20mm - 40mm for vessels with diameters of 1.5-3mm, 1.5-4mm, 2-5.5mm The cerebral thrombosis removal stent has an open structure, parametric folding design, self-expanding and can be completely recovered. There is 1 proximal marker, 3 or 4 distal markers, and markers evenly distributed along the stent body with a distance of 5-10mm. Compatible with microcatheter diameter 0.021"-0.027". Push wire has diameter 0.018" and length 200cm. Standards: FDA and CE and ISO. Packaging: 1 piece/box

Tra Vinh General Hospital

Self-expanding angioplasty memory holder (pelvis), diameter: 7mm-10mm, length: 30mm-180mm, material: Nitinol, system System: 0.035".

3

Female

Design: "Peak-to-Valley" and "S-articulations" (stent) help create compatibility and flexibility; Over The Wire (system). Material: Nitinol. Coating: proBIO (Amorphous Silicone Carbide). Diameter: 7mm, 8mm, 9mm, 10mm. Length: 30mm, 40mm, 60mm, 80mm. System length: 70cm, 120cm. Marker: 4 gold markers at each end of the holder, increase visibility. Wiring system: 0.035". Certified: CFS, ISO.

Tra Vinh General Hospital

Picture memory holder blood vessels (thigh self-expands shallow, above the stilt), diameter: 5mm- 17mm, length: 30mm-170mm, material: Nitinol, system System: 0.035".

10

Female

Design: "Peak-to-Valley" and "S-articulations" (stent) help create compatibility and flexibility; Over The Wire (system). Material: Nitinol. Stent body thickness: 140µm. Coating: proBIO (Amorphous Silicone Carbide). Diameter: 5mm, 6mm, 7mm. Length: 30mm, 40mm, 60mm, 80mm, 100mm, 120mm, 150mm, 170mm, 200mm. System length: 90cm, 135cm. Marker: 6 gold markers at each end of the stent, increasing visibility. Wiring system: 0.035". Certified: CFS, ISO.

Tra Vinh General Hospital

Balloon angioplasty bracket (pot), diameter: 5mm-10mm, length: 15mm-56mm, material: Stainless Steel, system: 0.035".

5

Female

Design: "Peak-to-Valley" (stent) helps create compatibility and flexible; Over The Wire (system). Material: Stainless Steel. Stent body thickness: 160µm (diameter 5mm-8mm), 180µm (diameter 9mm-10mm). Coating: proBIO (Amorphous Silicone Carbide). Diameter: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. Length: 15mm, 25mm, 38mm, 56mm. System length: 80cm, 130cm. Marker: 2 stereotypical markers (shadow). Wiring system: 0.035". Certified: CFS, ISO.

Tra Vinh General Hospital

Fall lock

1.400

Female

Material: Polycarbonate. Withstands pressure 200psi - 1050psi, inner diameter 2.5mm or 0.12", has 3 corners FDA standards

Tra Vinh General Hospital

Lock the breast lift bar (Stabilizer)

12

Female

*Used to fix the breast lift bar during breast augmentation surgery Production standard: stainless steel *The product is engraved with code, manufacturer logo, and year of manufacture.

Tra Vinh General Hospital

Novolimus-eluting coronary stent

50

Female

Novolimus-coated biocompatible coronary stent frame. Frame material: Cobalt Chromium, Ball material: Nylon Copolymer, Lattice thickness: 71 µm. Dosage: 5 μg/mm. Catheter length: 140 cm. Marker: Platinum Iridium, Normal pressure: 10-11 atm. Balloon burst pressure: 16 atm. Diameter: 2.25mm - 3.50 mm. Length: 14mm - 48 mm. Quality standards: ISO 13485, CE.

Tra Vinh General Hospital

Cover stent is used in emergency cases

1

Female

Material: Cobalt Chromium with ProBio coating. Stent frame thickness: diameter 2.5mm, 3.0mm with size 60µm (0.0024 inch); diameter 3.5mm - 4.0mm with size 80µm (0.0031 inch); 4.5mm diameter, 5.0mm has a size of 120µm (0.0047 inch). Length from: 15mm to 26mm. Diameter from: 2.5mm to: 5.0mm. The stent is covered with an ultra-thin layer of Silicon Carbide (PROBIO) and has a single layer design to make the diameter small. Standards: ISO, CE, FDA. Origin: European countries

Tra Vinh General Hospital

Needle puncture of femoral artery and radial vein 18G, 20G

50

Female

- Metal has no wings or doors. The needle tip is sharp due to being beveled twice. Catheter made of ETFE (Ethylene Tetrafluorethylene) material, smoothly tapered to fit the needle body, thin wall and wide cavity for high flow rate. The transparent blood chamber helps users easily detect when the needle is in the appropriate position. Retention time is 72 hours. - Sterilization by electron beam. There is radiopaque. Can be used in other procedures: paracentesis, arterial/venous catheter replacement. Size: 18G x 2" (51mm); 20G x 1 1/4" (32mm)

Tra Vinh General Hospital

Kim poked the pulse, thighs

100

Female

Needle puncture of radial and femoral veins. Stainless steel material designed with optimal handle and sharp needle tip for easy operation, Diameter: 18G, 20G, Length: 40mm, 70mm (Depending on product code), Meets FDA standards.

Tra Vinh General Hospital

Radial puncture needle, femoral 18G

2.000

Female

Threading needles are bladeless and doorless. The Catheter's sharp needle tip is made of ETFE material, smoothly tapered to hug the needle body, thin wall and wide cavity for high flow rate. The transparent blood chamber helps users easily detect when the needle is in the appropriate position. Retention time is 72 hours. Size: 18G x 2" (51mm)

Tra Vinh General Hospital

Peripheral vein needle, bladeless, doorless type No. 22G-24G

50

Female

- The needle has no wings or doors, there is a groove between the needle and the catheter - Flashback feature helps determine the position of the catheter quickly and intuitively. Sharp needle tip beveled twice. The catheter is made of Polyurethane material - the material will be hard at room temperature and softer at body temperature, resistant to twisting and durable. The transparent blood chamber helps users easily detect when the needle is in the appropriate position. - Sterilized with EO gas. There is radiopaque. - Size: 22G x 1" (25mm); 24G x 3/4" (19mm)

Tra Vinh General Hospital

Y-shaped artificial blood vessels

5

Female

Y-shaped artificial blood vessels used in cardiovascular surgery (abdominal aorta, iliac artery, femoral artery), Polyester material woven using knitting technique increases rupture resistance and limits aneurysm. Artificial blood vessels are coated with hydrolyzed dehydrogenated collagen to create durable cross-links to ensure fixed blood flow within the graft tube. Aldehyde and Isocyanate are not used during the impregnation process. Size: diameter: 12x6mm, 14x7mm, 16x8mm, 18x9mm, 20x10mm, 22x11mm, 24x12mm, length: 45cm Certification: CE

Tra Vinh General Hospital

Artificial blood vessels

2

Female

Artificial blood vessels used in cardiovascular surgery (thoracic aorta, aortic arch), Polyester material woven using woven technique increases rupture resistance and limits aneurysms. The artificial blood vessels are impregnated with collagen and no Aldehyde and Isocyanate are used during the impregnation process. The structure is different between the inner and outer sides of the graft to optimize blood flow Size: diameter: 8-34mm, length: 15-30cm Certification: CE

Tra Vinh General Hospital

Straight rib brace

6

Female

Rib fixation brace Titanium material 1.6 mm thick brace, countersunk screw holes, blue Straight type, 8 holes ISO 13485, FDA standards

Tra Vinh General Hospital

Pre-formed rib brace

6

Female

Rib fixation brace Titanium material Brace 1.6mm thick, countersunk screw holes, blue Type 12 pre-bent holes, radius of curvature in plane 30cm, radius of curvature out of plane 20cm ISO 13485, FDA standards

Tra Vinh General Hospital

Surgical drainage tube

5

Set

- Silicone material - Flat type, size 10 mm, length 102 cm - EC standards

Tra Vinh General Hospital

Blood straws in the blood vessel

10

Female

Large inner diameter enhances suction and softness for better remote control, twisted and braided coil design. Inner diameter 0.070", proximal outer diameter 0.0825", distal outer diameter 0.0815". Working length 125cm and 131cm. Distal length 19cm, proximal length 106cm and 112cm, straight end

Tra Vinh General Hospital

Catheter intervention

30

Female

Full-wall technology JL, JR, XBU, length 100cm, 5F-8F. FDA standards.

Tra Vinh General Hospital

Interventional catheters of all types and sizes

20

Female

Hydrophilic coating from 5cm/15cm long tip. Balanced tube body, increased stiffness helps stabilize the procedure, optimize thrust force. Catheter set with attached dilator instead of sheath helps reduce the size at the needle insertion site. Catheter size: 6F, 7F, 8F (Catheter set is 4F, 5F, 6F respectively). Inner / outer diameter of the catheter set: 1.8/ 2.09mm, 2.05/ 2.4mm, 2.28/ 2.7mm available length: 80cm- 110cm. Tip shape: angled, straight. Quality standards: ISO, CE

Tra Vinh General Hospital

Peripheral vascular intervention catheters of all sizes

10

Female

Material: Arnitel with 3 layers (Polyether - Ester Polymer outer layer, double anti-break woven layer and PTFE inner layer). The double layer of woven fibers prevents breakage and provides clear images, and the smooth inner PTFE layer helps instruments slide easily within the catheter. Diameter: 6F, 7F, 8F. Type 6F has a Lumen width of 0.070", 7F has a Lumen width of 0.081", 8F has a Lumen width of 0.091". Length: 55cm, 90cm. All types of curved heads: LIME, RDC, C1, C2, ST, MP, MP2, RE-S, HS, Crossover, Bates, Certified: ISO.

Tra Vinh General Hospital

Coronary intervention tube

400

Female

Move flexibly and support intervention tools well. The Full Wall flat fiber tube mesh technique helps the tube tube to be wider and the tube to move flexibly. The inner surface is made of improved Pebax material to help the tool be inserted gently and without obstruction. The inner diameter of size 5F is 0.058", 6F is 0.071", 7F is 0.081", 8F is 0.09". There are a full range of interventional curvatures, especially EBU, RBU, IMA, SAL, SL, AL,... Marker is located right behind the soft tip of the catheter. CE standards.

Tra Vinh General Hospital

Coronary intervention tube

400

Female

Coronary intervention catheter. Material: The inner layer is coated with PTFE, in the middle is a flat layer of high-strength braided stainless steel mesh, the soft outer layer has high optical resistance at the far end. The tube consists of 5 to 6 sections with different hardness on each section. The cage is 0.059" - 0.081" wide, size is 5F - 7F, length ≥100cm. Origin: G7 countries

Tra Vinh General Hospital

coronary intervention catheter type 2x4.

400

Female

The catheter consists of 3 layers: Inner layer: Made of PTFE material, Middle layer: Core woven with 2x4 metal strip, twisted for special torque, preventing kinking of blood vessels, Outer layer: Made of polymer mixture. Type 6F has Lumen width of 0.070". Curved tip (equivalent to RUNWAY type), ISO, CE, FDA quality standards

Tra Vinh General Hospital

Cardiovascular intervention tube

10

Female

The expanded catheter goes deep into the coronary artery with a length of 25cm - 40cm, length of shaft 125cm. Sizes 6F -, 8F and 6F long. Hydrophilic coating, spiral connector made of Platinum Iridium

Tra Vinh General Hospital

Interventional catheter with mesh technology, helping the tube lumen to be wide and move flexibly.

30

Female

Size: Size 5,6,7,8 Fr. The inner diameter of size 5F is 0.058", 6F is 0.071", 7F is 0.081", 8F is 0.09". Length 90cm &100cm. More than 230 types of curved ends, including special types of curved ends: EBU, NOTO, CHAMP, 3DRIGHT... Tube mesh weaving technique uses double woven flat yarn between 2 layers of polymer to help the tube lumen become wider and the tube move flexibly. The outer layer is made of Vest-Tech Nylon material to help increase the ability to absorb light. The distal catheter can be calibrated to match the vascular morphology.

Tra Vinh General Hospital

He cleared the diagnosis

30

Female

Steel material, double twisted mesh, anti-twist JR, JL, PIG, TIG | length 100cm, diameter 4F-6F. FDA standards.

Tra Vinh General Hospital

Cardiac chamber diagnostic catheter equivalent to Radifocus Optitorque (Angled Pigtail)

30

Female

Description: The cardiac diagnostic catheter has a 3-layer structure: the inner and outer layers are polyurethane-rich nylon, the middle layer is stainless steel. Size: diameter 4Fr (heart width 1.03mm) -5Fr (heart width 1.20mm), length ≥110cm The walls are extremely thin, creating a wide circumference. Compatible with 0.038'' guidewire. Pressure limit 4Fr: 750psi, 5Fr-6Fr: 1000psi.

Tra Vinh General Hospital

radial pulse diagnostic catheter

500

Female

Spinning coronary angiography catheter Designed with double braid technology. Tube wall material: different types of Polyamide in 2-layer tube structure. Head shape for intervention through thin tube wall, wide tube tube for maximum flow rate of 23mL/s, Maximum pressure: 1200psi. Compatible with 0.038' guidewire, diameter 5Fr (1.20mm width), length 100 -120cm

Tra Vinh General Hospital

right and left coronary artery diagnostic catheter

700

Female

- Made of Nylon Pebax material, the tool surface is smooth, slippery, durable at body temperature, thin tube walls, tip has good shape memory - There are types JL, JR, AL, AR - All sizes 4F, 5F, length 100cm/125cm - Inner diameter 0.042"/1.07mm type 4F, 0.046"/1.17mm type 5F, 0.054"/1.37mm type 6F - Can be used with guide wire 0.035", 0.038" - Type with or without side holes. Meets FDA standards

Tra Vinh General Hospital

Catheter

50

Female

Structure: 3 layers of nylon elastomer with stainless steel mesh (SUS). SUS layer for good pushing ability. Polyamide coated surface, rounded tip, coaxial structure. Size: 5Fr (inner diameter 0.043''). Length 100cm. Anti-glare surface, 0.038'' guidewire compatible. Pressure limit 1000psi (equivalent to RF*EA25010M )

Tra Vinh General Hospital

The cerebral angiography catheter is made of 3 layers of nylon elastomer

50

Female

Structure: 3 layers of nylon elastomer with stainless steel mesh (SUS). SUS layer for good pushing ability. Polyamide coated surface, rounded tip, coaxial structure. Size: 5Fr (inner diameter 0.043''). Length 100cm. Anti-glare surface, 0.038'' guidewire compatible. Pressure limit 1000psi (equivalent to RF*EH15010M )

Tra Vinh General Hospital

The shunt supports peripheral vascular intervention at a bent angle

5

Female

The catheter is sized 4Fr and 5Fr, sliding on a 0.035" (0.018") guide wire, helping to reach the damaged area in the safest and most effective way. Easy to use, easy to push and pull, good light barrier, safe - Quality standards: ISO, FDA.

Tra Vinh General Hospital

Cannula supporting peripheral intervention, operating length 65cm, 90cm, 135cm, 150cm

2

Female

These are 4Fr and 5Fr catheters traveling on 0.035", 0.018" and 0.014" guide wires to help reach the damaged area in the safest and most effective way. Marker ring length 15mm or 50mm, working length 65cm, 90cm, 135cm, 150cm. Easy to use, easy to push and pull, good light blocking, safe Distal 40cm hydrophilic coating increases the ability to pass through difficult lesions

Tra Vinh General Hospital

Blood suction tube

5

Female

Nitinol material, wide inner diameter 0.068" and 0.071", maximum outer diameter 0.083" and 0.0855". Length 132cm. Woven coil design, soft beveled tube tip. Support/Compatibility of thrombectomy stents in intervention and treatment of cerebral stroke. Standards: FDA and CE and ISO. - Packaging: 1 piece/box Origin: G7 countries

Tra Vinh General Hospital

2F vascular catheter (sonde Fogarty)

5

Female

*Catheter removes blood clots in arteries, soft tip, break-resistant balloon, packaged with syringe compatible with balloon included. *Material 100% silicone, latex free, biocompatible. Anti-breakage balloon, flexible stylet inserted into blood vessels during manipulation. *Size 2F

Tra Vinh General Hospital

3F vascular catheter (sonde Fogarty)

10

Female

*Catheter removes blood clots in arteries, soft tip, break-resistant balloon, packaged with syringe compatible with balloon included. *Material 100% silicone, latex free, biocompatible. Anti-breakage balloon, flexible stylet inserted into blood vessels during manipulation. *Size 3F

Tra Vinh General Hospital

4F vascular catheter (sonde Fogarty)

5

Female

*Catheter removes blood clots in arteries, soft tip, break-resistant balloon, packaged with syringe compatible with balloon included. *Material 100% silicone, latex free, biocompatible. Anti-breakage balloon, flexible stylet inserted into blood vessels during manipulation. *Size 4F

Tra Vinh General Hospital

5F vascular catheter (sonde Fogarty)

5

Female

*Catheter removes blood clots in arteries, soft tip, break-resistant balloon, packaged with syringe compatible with balloon included. *Material 100% silicone, latex free, biocompatible. Anti-breakage balloon, flexible stylet inserted into blood vessels during manipulation. *Size 5F

Tra Vinh General Hospital

Soft tip interventional assist catheter, 100cm strip

10

Female

Structure: the inner layer is made of PTFE, in the middle is a layer of high-strength braided stainless steel mesh, the outer layer is soft and has high optical resistance at the distance. Features: outstanding material structure consisting of 5 to 6 zones, each made from materials of different hardness (ZONE Technology). - BL, JR, JL, MP, AL, Ikari shapes - Size: size 5F has an inner diameter of 0.059", size 6F has an inner diameter of 0.071", size 7F has an inner diameter of 0.081". Length 100cm.

Tra Vinh General Hospital

Self-expanding peripheral stent

5

Female

Self-expanding stent, made of shape memory nitinol, with three-axis design to increase the precision of the bracket, Open-cell, diameter 5,6,7,8 mm, length 20-40-60-80-100-120-150mm, catheter length with stent attached 80cm, 120cm and 150cm, using 0.035" guide wire, tantalum marker enhances visibility Used to open narrow peripheral arteries (iliac, femoral, subclavian...), easy to push, good radiopaque, good tension against the vessel wall - Quality standards: ISO, FDA.

Tra Vinh General Hospital

Self-expanding carotid stent made of shape memory nitinol, diameter 6-10mm

2

Female

Self-expanding stent made of shape memory nitinol, bracket includes 02 types: Straight and Tapered suitable for carotid artery.: straight type, diameter 6mm-10mm, length 20mm-60mm. Tapered type, length 30mm -40mm, catheter length with stent attached is 135cm, using 0.014" guide wire with 6Fr catheter. Using EX.P.R.T technology in the system The stent release system helps to release the stent exactly at the desired position to avoid phenomenon of stent jumping, premature stent release. Used to open extracranial carotid artery stenosis, easy to push, good radiopaque, there are straight and tapered types to choose from, good tension against the vessel wall. Tantalum marker..Certificates, ISO, CE.

Tra Vinh General Hospital

Coronary stent containing the drug Amphilimus

50

Female

Bracket frame material: L605 Cobalt Chromium Alloy, Non-polymer, Drug release through osmotic drug reservoir, Bracket frame thickness 70µm - 80µm, 2 markers made of Platinum material on the first (end) part of the rack frame, Bracket frame does not shorten during the expansion process of Amphilimus drug formula: Sirolimus + Fatty Acid, Diameter: 2.5- 4.5 mm. Length: 9mm- 46 mm. 1. Origin: European countries

Tra Vinh General Hospital

Biolimus A9 drug-eluting coronary stent

100

Female

Description: Biolimus A9 drug-coated coronary stent without polymer coating. Drug content ≥15.6µg/mm Size: diameter from 2.25mm to 4.0mm, length from 9mm to 36mm. Material: Cobalt Chronium. Support bar thickness ≤ 88 µm. . Lattice diameter: ≥1.58mm, compatible with 0.014" guide wire and 5F catheter, Radial force resistance > 0.67bar or 500mmHg.. Standard: ISO,EC

Tra Vinh General Hospital

Everolimus-eluting coronary stent 1.2 µg/mm2

100

Female

Everolimus-eluting coronary stent, dosage 1.2 µg/mm2, PLLA/PLGA bioresorbable polymer, coating thickness: 3-5 µm, Cobalt Chromium L605 material, Stent frame thickness: 65μm, stent frame width 85μm: at both ends and 70 μm: in the middle. Diameter: 2.00mm- 4.50mm, Length: 8mm- 48 mm. Catheter length: 140 cm, Guide tube lumen length: 25 cm, Balloon made of Polyamide/Nylon material 12. Body size approximately 1.9F, body far 2.5-2.9F, Number of ball folds: 3 wings. tip: 0.016", Border across the lesion ≤0.02" Nominal pressure 7 bar, maximum critical pressure 16 bar. Meets standards: ISO 13485

Tra Vinh General Hospital

Sirolimus-eluting coronary stent

100

Female

Material: Cobalt Chromium alloy, Coating: Sirolimus with a concentration of 1.4μg/mm2, Proteqto Polymer is highly biocompatible. Stent bar thickness: 80µm, Catheter length 142cm, tip profile: 0.017", crossing profile: 0.90mm. Critical pressure: 16 bar; Balloon inflation pressure: 6 bar. Diameter: Ø2.25 - 4.5mm, Length Stent: 8.- 48mm, Two radiopaque markers positioned in the ampulla. FDA standards. Origin: G7 countries

Tra Vinh General Hospital

Sirolimus-eluting coronary stent

100

Female

Co-Cr(L605) core stent, thin Stent wall ≤60µm for all diameters. Coated with Sirolimus dose of 1.4µg/mm2, 3-component Polymer: PLLA, PLCL, self-absorbable PVP. Shortening rate 0%, shrinkage < 4%, Two Pt/Ir markers on the balloon increase visibility. Stent waves of 4 crowns - 8 crowns depending on diameter ensure the integrity of the stent structure. Diameter: 2.0-4.5 mm, length: 8-48mm, NP: 8 atm, RBP: 16 atm,

Tra Vinh General Hospital

Everolimus-eluting coronary stent with CoCr frame material

20

Female

Stent frame Cobalt Chromium material, coated with Everolimus100µg/cm2. Balloon in stent: material: Pebax. Diameter: 2.0mm- 4.0mm. Length: 8 - 38mm, Crossing profile: 0.039 inch (3.0 x 18mm). Tip cross section 0.017" (3.0x18mm), working length of catheter 145cm. Nominal pressure 9atm-12atm, maximum balloon rupture pressure 16atm. Technical standards: ISO, CE

Tra Vinh General Hospital

Sirolimus coronary powder stent

100

Female

Cobalt Chromium coronary stent coated with Sirolimus 1.4μg/mm2, Diameter 2.0mm - 4.5mm, length 9mm - 49mm, 3-layer self-absorbable polymer helps optimize drug release, small Strut stent 75μm - 85µm. The shiny material of the stent is Nylon and Pebax, with HYDRAX hydrophilic coating. Positioned with 2 Platinium Iridium markers

Tra Vinh General Hospital

Sirolimus coronary powder stent

100

Female

1. Drug: Sirolimus, dosage 1.33µg/mm2, coating thickness 3-5µm 2. Stent frame: Cobalt Chromium L605, zigzag stent frame design, 6 vertices - 3 connections between rings of 2.00-2.75 mm diameter stents, 8 vertices design - 4 connections between rings of 3.00-4.50 mm diameter stents 3. Frame thickness: Strut thickness 65 µm 4. Hook (open, closed): combination of open and closed 5. Other features: - Biodegradable polymer: PLLA/PLGA 50:50. - Diameter: 2.00, 2.25, 2.50, 2.75, 3.00, 3.25, 3.50, 4.00, 4.50 (mm). - Length: 08, 09, 13, 15, 18, 23, 28, 33, 38, 40, 44, 48 (mm). - Stent frame width: At both ends: 85 μm; Middle segment: 70 μm - Connection width: straight connection at both ends: 85 µm and "U" connection in the middle: 50 µm - Nominal pressure: 7 bar - Quality standards: ISO 9001:2015, ISO 13485:2016, ISO 14001:2015

Tra Vinh General Hospital

Sirolimus-eluting coronary stent 1.4µg/mm2

50

Female

Sirolimus 1.4µg/mm2 coated coronary stent with Biolute and ProBio dual coating, stent bar size 60µm - 80µm. Diameter: 2.25 - 4mm, length 9-40mm. Nominal pressure 10 atm, maximum pressure 16 atm Technical standards: FDA, CE. Origin: European countries

Tra Vinh General Hospital

SIROLIMUS 3.9µg/mm drug-eluting coronary stent

100

Female

Cobalt Chromium L605 material, Poly self-absorbing polymer, coated with Sirolimus dose of 3.9µg/mm Polymer absorption and drug release time is 3-4 months. Lattice eyes arranged like snake scales, thickness 80µm, branch opening 14.5mm² depending on diameter Stent propulsion system parameters: Propulsion system body is reinforced with stainless steel core, Entry profile: 0.018''. Polyamide elastomer material input. Crossing profile: 0.044'' Balloon material: Nylon 12.- Reference pressure: 9atm. Maximum pressure: 14 atn - 16atm depending on size. Distal shaft diameter: 2.7Fr with hydrophilic coating, proximal part 1.9Fr, Shaft length: 144 cm Stent size: Diameter 2.25mm - 4.0mm. Length: 9mm- 38mm. Origin: countries in the G7 bloc

Tra Vinh General Hospital

Sirolimus-eluting coronary stent 5.0 µm/mm,

50

Female

The outside of the stent is coated with sirolimus drug on a biodegradable polymer base combined with an anti-CD-34 antibody layer that actively heals the vessel lumen, drug content 5.0 µg/mm, stent width 90µm. Stent thickness: 100µm stent profile: 0.0361 inch Hydrophilic layer coated with Hydro-X Stent diameter: 2.5 - 4.0 mm. Stent length: 9 – 38 mm. Quality certification: ISO, CE. Origin: European countries

Tra Vinh General Hospital

Peripheral nitinol shape memory stent, self-expanding, diameter: 5mm - 8mm. Length: 20mm -200mm, compatible with 0.035" wire

5

Female

Peripheral arterial stents (superficial femoral (SFA), popliteal, ...) self-expanding with shape made of sheath, Nitinol material, close and open cell design (designed with a closed stent cell system at both ends and an open stent cell system in the middle) increase the support and fracture resistance of the stent. The stent is marked with a tantalum marker and a radiation-blocking tip. Diameter: 5mm - 8mm. Length: 20mm - 200mm. Body shaft length: 75cm and 130cm. Sheath compatibility: 5-7F. Compatible conductor: 0.035".

Tra Vinh General Hospital

Rapamycin-eluting stent

30

Female

Rapamycin-coated stent is made of Cobalt Chromium material, coated with DL-PLA polymer and Rapamycin drug in a ratio of 4:5. The wall surface is cut with additional grooves, helping the drug to be released accurately into the damaged location, the thickness of the stent frame is 86μm -96.5μm. The two markers on the proximal axis are located 95cm and 105cm from the tip. The stent balloon is made of Pebax material, hydrophilic coating, Rapid Exchange type. Nominal pressure: 10atm, maximum pressure: 14-16atm. Stent diameter: 2.25-4.0mm, stent length: 13-38mm.

Tra Vinh General Hospital

Open-jaw welding knife handle with non-stick nano coating, curved tip, knife body length 23cm

10

Female

- The knife mount is coated with nano-coated non-stick layer - Circuit welding / cutting - Diameter 5 mm; Length 23 cm (9 in.) - Knife strap comes with knife handle - Knife head rotation axis: 350 degrees - Maryland jaw with contour design - Activate arms or legs - Knife jaw shape: Curved - Length of soldering area: 20.3mm - Length of F149 cutting area: 18.5mm - Tissue Effect Tissue Induction Frequency 434,000 times - Compatible with Valleylab LS10, FT10 machines - Quality standards: ISO 13485, CE, CFG

Tra Vinh General Hospital

Endoscopic surgical welding knife handle with non-stick nano coating, curved tip, blade length 37cm

15

Female

- The knife mount is coated with nano-coated non-stick layer - Welding/cutting - Diameter 5 mm; Length 37 cm (14.6 in.) - Knife head rotation axis: 350 degrees - Knife strap comes with knife handle - Maryland jaw with contour design - Activate arms or legs - Curved blade shape - Length of soldering area 20.3mm - Cutting area length 18.5mm - Tissue Effect tissue induction frequency 434,000 times - Compatible with Valleylab LS10, FT10 machines - Quality standards: ISO, CE, CFG

Tra Vinh General Hospital

Breast lift bar

6

Female

The length is engraved right on the bar. The top of the bar is rounded, has a hole in the middle and two serrated edges. In the middle of the bar there is a marker. Steel material ASTM F 138. Many sizes from 7 inches to 17 inches. ISO 13485 standard

Tra Vinh General Hospital

Trocar 10.5 mm for thoracoscopic surgery

12

Female

Chest wall penetration instrument used specifically for thoracic surgery, consisting of a blunt tip and a twisted threaded non-conducting pipe with a rounded distal end to protect the chest cavity from foreign bodies and stabilize the instruments during surgery. Length 60mm, diameter 10.5mm, suitable for 11mm diameter tools. Standards: ISO, CE, FDA

Tra Vinh General Hospital

Trocar 12 mm for internal surgery Thoracoscopy

12

Female

The soft thoracic surgical trocar has a soft rubber pad at the tip of the Trocar to avoid tissue damage, including a blunt tip and a twisted threaded non-conducting tube with a rounded distal end to protect the chest cavity from foreign bodies and stabilize the instruments during surgery. Length 60mm, Diameter for tools with a diameter of 12mm Standard: ISO, CE, FDA

Tra Vinh General Hospital

Trocar 5.5 mm for internal surgery Thoracoscopy

12

Female

Chest wall penetration instrument used specifically for thoracic surgery, consisting of a blunt tip and a twisted threaded non-conducting pipe with a rounded distal end to protect the chest cavity from foreign bodies and stabilize the instruments during surgery. Length 60mm, diameter 5.5mm, suitable for tools with diameter 6mm. Standards: ISO, CE, FDA

Tra Vinh General Hospital

Pressure bag

24

Female

Allows users to switch from standard pressure to overpressure mode when necessary, Has a pressure release valve to prevent the bag from exploding, many types ≥ 500ml, FDA standards

Tra Vinh General Hospital

Chest drainage valve (Van Heimlich)

10

Female

Includes a piece of rubber tubing placed in a plastic tube, integrating a fixed collar with a multi-level drainage catheter adapter and an air filter valve. ISO 13485, EC standard

Tra Vinh General Hospital

Cardiovascular intervention conductor

20

Female

Multi-core conductor with ACT ONE technology (double helix design) increases tip durability, torque response and shock resistance. Tip load from 0.3 - 20 gf provides very good support for CTO intervention cases. Coating: silicon, SLIP-COAT or SLIP-COAT on polymer base. Tip: straight, J, pre-shape. Length: 180, 190, 300 cm , 330cm. Quality certification: ISO, CE.

Tra Vinh General Hospital

Neurolic intervention tube

22

Female

Dimensions: Near-far outer diameter is 2.7Fr-2.4Fr, inner diameter is 0.021", length is 153cm. Material: Stainless steel, hydrophilic, PTFE, Pebax plastic. The microcatheter has a structure including stainless steel fibers wrapped around the body to avoid folding and maintain the shape of the lumen, the peripheral tip of the catheter is soft and straight, the hydrophilic coat covers the outer surface, the PTFE layer lines the lumen. in Finally, Pebax plastic layer. DMSO compatible, compatible with largest conductors 0.018". Standards: FDA and CE and ISO. Packaging: 1 piece/box

Tra Vinh General Hospital

Hydrophilic-coated neurovascular intervention microcatheters of all kinds

10

Female

PTFE microcatheter, Hydrophilic coated outer layer design helps reduce friction for better navigation in winding blood vessels, increasing durability for long-term use. Various tip shapes are available: Straight tip, 45 degree, 90 degree and J-shaped tip. Inner diameter from: 0.017", 0.021" and 0.027",  proximal outer diameter from 2.4F, 2.5F, 3.1F, distal outer diameter from 1.7F, 2.0F and 2.6F . Usable length is 150 cm and 156cm. There are two radiopaque markers. Origin: European countries

Tra Vinh General Hospital

Rib screws

12

Female

Locking self-drilling screw design for rib splint, blue Titanium material Size 2.4mm, length from 7mm to 16mm ISO 13485, FDA standards

Tra Vinh General Hospital