Quotation for autoclave sterilizer

Autoclave - Country of manufacture: Vietnam

1

Female

GENERAL REQUIREMENTS: - Equipment manufactured in 2026 or later - 100% new equipment - ISO 13485 quality standards or equivalent CONFIGURATION AND ACCESSORIES: - Main machine: 01 machine - Trolley system: 01 piece - 3-phase power cable: 5 meters - Ground wire: 01 set - User manual: 01 book TECHNICAL SPECIFICATIONS: - Rectangular circular cylindrical steaming chamber Horizontal, made of SUS 304 stainless steel, made of 2 layers, the outer Jacket layer and the inner lining layer. There is a shell temperature and pressure adjustment system to control the temperature and pressure of the inner layer, helping to dry the steaming batch and achieve ideal steaming results. - Steaming chamber capacity 200 liters - Horizontal single-door or two-door manual crank door - optional. Door material made of SUS 304 stainless steel - Controlled by central microprocessor, fully automatic from start to finish. - There are 5 pre-installed programs suitable for each different type of steaming material and 1 optional steaming program set by the user. - Control and compare pressure and temperature during the sterilization process - Dry autoclaved objects with a vacuum system. - Can be powered by self-generated steam inside the machine or by high-pressure steam from outside. - Steaming pressure 1.05 - 2.2 kg/cm2 (± 0.1 kg/cm2) - Steaming temperature 1050C - 1340C (± 10C) - Steaming time 0 - 180 minutes - Drying time 0 - 180 minutes - Printer: prints date and time, steaming temperature, steaming time, steaming batch results - There is a warning and protection system when: Lack of water or dehydration. The door is open or not closed tightly. Air compressor not working. Prevents phase loss and phase reversal. Pressure sensor and temperature sensor are faulty.

Thai Thuy General Hospital