3 -phase generator

Perform 01 3 -phase generator with the following specifications: 1. - Engine power at rated speed: ≤ 414 kW; ≤ 555HP - Suction and cooling: charging and air -cooled tubo - Number of cylinders and layout types: 8 cylinders of V -type - Engine speed: ≤ 1,500 v/min - Speeder: Electronic control - Fuel consumption at full load: ≤ 89.3 liters/hour - Fuel tank capacity: ≥ 700 liters - Cooling water capacity: ≥ 80 liters 2. Machine (head) power generator - Design: No brushless, a bearing, magnetic field - Stator: Step 2/3 - Rotor: A bearing, floppy disk - Continuous power: ≤ 400/320 (KVA/KW) - Backup capacity: ≤ 440/352 (KVA/KW) - Voltage: (400/230) volt - Frequency: 50 Hz - Insulation: Grade H - Protection level: ≥ ip21 - Type of self -stimulus: Yes - Automatic voltage regulator: Yes - Standard increasing temperature: 125 - 163 0C (continuous operation) 3. Control module: a. Characteristic: - Monitor the power source and start/off the transmitter; - Automatic control of transmitter and grid contact; - Monitoring engine performance and generator capacity; - Alarm by LED. b. Show via LCD screen: -Generator voltage (L-L/L-N); - Engine oil pressure (PSI/Bar; - generator current (L1, L2, L3); - Motor temperature (OC & Of); - Generator frequency (Hz); - % of rated capacity; - Power coefficient cosφ; - Battery voltage; - Total running time; -Grid voltage (phase) KVA, KWh. c. Warning: - The speed is too high/low; - High/low battery; - Incarnation/stop; - Excessive charging error; - High/low generator voltage; - Low oil pressure; - Emergency stop; - High temperature; - Overload KW; - Unbalanced download; - Error of independent ground touch. d. Directive LED light: - There is electricity; - There are generators; - Load is using electricity; - Load is using generator. 4. Cold steel-made steel shell 2-5mm, powder coating, standard soundproofing materials.

Own capital of the company