Plan for selecting contractors to build hamper dams

Project management project

The central budget, local budget and people contribute to implementing the National Program of NTTM

- New investment in hamlet irrigation dams, the length of the dam b = 18m; The width of the dam in the flow is 1.0m; dam height 2.35m; The body is structured by BT 150#; In addition to reinforced concrete 200#, 20cm thick; Stone walls made of VXM 100#; On the body of the dam arranges sand drain with reinforced concrete 200#; The abutments arranged the door to get water into the irrigation canal, with reinforced concrete sheet to regulate. Arranging embankment walls against both sides of the peak of the dam, the wall is deep into the shore to prevent erosion, the structure of XM 100#. - Functional tank: 5.0m long, 18.0m wide, BT M150 structure is 60cm thick, on the surface of BTCT M200 is 15cm thick, arranged drainage holes to reduce pressure with PVC D50 pipe. Stone walls made of VXM M100. - The backyard: 2.0m long, 18.0m wide, the structure of a battle, the size of each basket is (2x1x1) m. - Sewers take water into the irrigation canal: The sewer line is located on the dam of the dam, the length of 9.66m, the structure of concrete M150, the rectangular section of the table = 40x40cm, the layout of the fading slot and the fading sheet of reinforced concrete to regulate the water into the canal, the manhole cover of reinforced M200. - Lower embankment: The length of each side is 6 m, the stone structure is built by VXM M100, the wall of the wall has the layout of drainage holes with VPC D50 tube.

The central budget, local budget and people contribute to implementing the NTT Missal Program.

Construction supervision

The central budget, local budget and people contribute to implementing the NTT Missal Program.