Medical equipment quotation

Shockproof box

113

Box

- Material: PP plastic; Dimensions: 265mm x 195mm x 70mm – Lid section: consists of 2 sides • Side 1: Includes logo, medication name, and diagnostic chart. • Side 2: Contains a diagnostic chart that is symmetrical to the side. – Body section: divided into one large compartment on the left and 5 smaller compartments on the right: The 5 smaller compartments on the right are each 3cm wide x 17cm long and are used to store, from right to left: 2 sets of Garo cords + Alcohol pads – 2 syringes – 10ml syringe: 2 units – 5ml syringe: 2 units – 1ml syringe: 2 units – The large compartment on the left side of the box is 9cm x 17cm wide and is divided into several smaller compartments containing: First row: Adrenaline 1mg/1ml: 5 vials – Second row: Diphenhydramine HCL 10mg: 5 vials – Third row: 5ml of distilled water: 6 vials and Methylprednisolone 40mg: 2 bottles - Bottom section: has a small slot for storing the treatment plan...

Hospital C

Alcohol box

30

Female

Material: 304 Stainless Steel Dimensions: φ85 x 65 mm Structure: Includes a base and lid.

Hospital C

I NoX steam generator

15

Box

Diameter: 20 cm; Made of stainless steel – Can be sterilized by steam at 134°C.

Hospital C

Garo wire

85

Female

The garo cord has a plastic clasp, making it reusable.

Hospital C

Examination lamp

7

Female

Power Source: AC100-240V ~ 50Hz/60Hz Power Consumption: 12W Brightness: ≥40000 Lux (4 adjustable levels) Color Temperature: 4000 – 5000K (4 adjustable levels) Illumination Range: 180 – 220 mm Color Rendering Index (CRI): ≥90 Uses G7 country LED lights, with an average lifespan of 50,000 hours. Adjustable color temperature and brightness memory; constant drive mechanism; adjustable beam angle: Up: 90 degrees Down: 90 degrees Horizontal rotation: 300 degrees Angle adjustment: 53 degrees up / 35 degrees down Material: Aluminum housing

Hospital C

Aerobic

10

Female

The configuration includes: air compressor, gas spray nozzle, gas tubing, spare filter, mouthpiece, child-sized mask, and adult-sized mask. – Basic specifications: Voltage: 220-240V, 60Hz. Spray rate: 0.4 ml/minute (without cap). Particle size approximately 5 μm MMD*. Cup volume: maximum 7 ml (cc). – Operating conditions: Temperature: 10°C to 40°C Humidity: 30%RH to 85%RH - Quality standards: ISO

Hospital C

Oxygen meter

20

Female

Includes: + Pressure gauge. + Oxygen flow meter. + Oxygen humidifier. + Polycarbonate-made head for durability. - Inlet pressure: 150 bar - Safety valve: 3.5 bar ± 0.5 bar - Outlet pressure: 2 bar - 3 bar - Flow rate range: 1 L/min – 10 L/min; Includes calibration certificates for Group II measuring instruments.

Hospital C

Straight

10

Female

Stainless steel material, seamless construction, size: 16 cm.

Hospital C

Pipe

5

Female

High-quality stainless steel material; Dimensions: φ5 x 14.5 cm

Hospital C

Bottle with a nozzle

2

Jar

Capacity: 8 liters; Includes a quality safety certification document.

Hospital C

Test tube holder

10

Female

Price for stainless steel beakers with a diameter of 13mm and 20 holes.

Hospital C

Take enemas

1

Set

Uses: For irrigating the bowel in patients with constipation or for cleaning the colon, according to doctor's instructions. Includes: - 1 catheter - 1 2-liter container - 1 Ø1cm x 120cm tube, made of 304 stainless steel

Hospital C

I NoX steam generator

5

Female

Material: 201 Stainless Steel; Dimensions: Height 17cm, diameter 30cm ±5%

Hospital C

Squeeze the ampu ball

4

Female

PVC Ball Pump, PVC Mask, Bag Volume: 2000 ml, Ball Volume: 800 ml, Body Weight: > 30 kg, Oxygen Hose, Origin: G20

Hospital C

Squeeze the ampu ball

2

Female

PVC Ball Pump, PVC Mask, Storage Bag Volume: 1600 ml, Ball Volume: 350 ml, Body Weight: 10 - 30 kg, Oxygen Tubing, Origin: G20

Hospital C

Title Title

2

Female

Materials: 201 Stainless Steel – Dimensions (DxRxH): 1000x700x800-1000mm (±5%) – 40x40mm steel frame – 4 upright posts with 31.8mm and 25.4mm diameter tubes – 10x40mm steel frame for the table top – 30mm deep stainless steel tabletop, detachable from the frame – Adjustable height from 800 to 1000mm using integrated plastic knobs – The table legs have 4 high-quality rubber castors with locking brakes.

Hospital C

Bean fruit tray

20

Female

200ml stainless steel material

Hospital C

Stainless steel bowl

20

Female

Type: Medical grade, for storing cotton swabs and performing procedures. Material: 304 stainless steel. Mouth diameter: 8cm ± 5%.

Hospital C

Surgery clamp with a lift

20

Female

Dimensions: 16 cm (±5%), made of stainless steel, conforming to the manufacturer's ISO 13485 quality management system standards.

Hospital C

Surgery clamps without lift

20

Female

Dimensions: 16 cm (±5%), without protrusions. Material: Stainless steel, conforming to the manufacturer's ISO 13485 quality management system standards.

Hospital C

Tug

20

Female

Dimensions: Length of 10 cm, straight and pointed tip. Material: Stainless steel. Tolerance: ±5%. Complies with the manufacturer's quality management system standard (ISO 13485).

Hospital C

Health balance

2

Female

Weight capacity: From 0.5 kg to 120 kg Height measurement range: From 70 cm to 190 cm Scale dimensions: 28 cm x 38 cm - Includes certification documents for the measuring equipment (Group II)

Hospital C

Tray 1 (No. 1)

3

Female

Material: Made of shiny, polished 304 stainless steel. Dimensions: 30cm wide x 40cm long x 2cm high.

Hospital C

Tray 1 (No. 1)

20

Female

Material: 304 Stainless Steel - Dimensions: 22cm (width) x 32cm (length) x 4cm (height)

Hospital C

Movie Reading Lights

1

Female

Two-door film reading light for CT, MRI, and X-ray imaging – Features adjustable brightness on the front surface; – Automatically turns on when a film is loaded or when a manual switch is activated; – Can be placed on a cart, desk, or mounted on the wall; – Uses LED bulbs with dimming capabilities to adjust brightness. – 2m power cord; Stainless steel housing – Converts AC voltage to DC; – Prevents eye strain; – Provides even lighting; Dimensions: 45cm x 72cm (±5%)

Hospital C

Tray 1 (No. 1)

5

Female

Material: 304 Stainless Steel - Dimensions: 22cm wide x 32cm long x 2cm high

Hospital C

Reflected hammer

2

Female

Medical reflex hammer. Hammer head: triangular shape. Handle: stainless steel.

Hospital C

Mouse

5

Female

Dimensions: 16 cm long (5 teeth), stainless steel material. Tolerance: ±5%.

Hospital C

Suction machine

7

Female

Two-tank type oil suction machine. Capacity of 2 bottles (2.5 liters). Suction capacity (20 liters/minute). Power supply voltage 220V/50Hz. Air pressure 86 – 106 kPa. Noise level ≤ 60db (A). Material: Fluid tank (Transparent glass), Machine body (High quality plastic). Dimensions 36cm x 32cm x 48cm. Product weight 13.5kg. Warranty 12 months. Included accessories: Pedal, 2m silicone cord, plastic straw, backup filter, fuse, user manual

Hospital C

Visual acuity measurement screen

1

Set

LCD screen ≥23 inch Brightness: 250 cd/m² Visual acuity: 0.04 – 2.0 Display: single character, single line, single column, full-screen Contrast: Adjustable Distance: 2 – 7m, adjustable in increments of 0.1m Power supply: AC110-240V, 50HZ/60HZ, 50W Remote control: Yes Can be used with a tablet after installing the app Dimensions: 585(W) X 46(D) X 380(H)mm Weight: 3.8kg

Hospital C

Trolley

5

Female

Origin: Vietnam Technical Specifications: - Frame Material: Steel frame, powder-coated for high load capacity and rust resistance. - Seat Material: Durable, non-stretch nylon fabric. - Maximum Load Capacity: 120kg - Hand brake for the pusher. - Seat Width: 45cm - Overall Width: 65 cm - Height from ground to seat: 50cm - 24" PU wheels, with 8" side rubber tires

Hospital C

Electronic blood pressure

15

Set

Digital Blood Pressure Monitor: Features a clear LCD display and includes high blood pressure warning and error detection for incorrect cuff placement or movement during measurement. Key specifications: Measurement range: Systolic: (0-299) mmHg, Diastolic: (40-180) bpm. Accuracy: Systolic: ±3 mmHg, Diastolic: ±5%. Mechanism: Automatic inflation and deflation with a pressure relief valve. Power source: 4 AA batteries, power adapter. Memory: Stores the last measurement result. Cuff placement check: Automatically checks and alerts if the cuff is not placed correctly. Movement detection: Alerts the user if movement is detected during measurement to ensure accurate results. - Comes with certification for Class II measuring devices.

Hospital C

Children's anesthesia equipment set

2

Set

Material: Medical-grade silicone 10mm diameter silicone tubing, 130cm long (3 pieces) for pediatric use Adult adult size syringe, O.D=22mm/I.D15/O.D10mm (1 piece) 15mm diameter adapter, 9-11mm (1 piece) ETCO2 measurement port adapter (1 piece) Sterilization: 134°C Application: GE anesthesia machine with breathing function, Drager and other anesthesia machines *: Pediatric 500ml anesthesia mask Material: Medical-grade silicone Volume: 500 ml Mask hole diameter: I.D22 mm Color: White Sterilization: 134°C Application: GE anesthesia machine with breathing function, Drager and other anesthesia machines Origin: G7

Hospital C

Adult Anesthesia Machine with Resuscitation Equipment

4

Set

Material: Medical-grade silicone Silicone tubing, 22mm diameter, 130cm long (3 pieces) Adult ID 15mm/OD=22mm adapter: 1 piece Adult straight adapter, ID 15mm/OD=22mm: 1 piece Angle adapter with ETCO2 measurement port: 1 piece Sterilization: 134°C Application: GE anesthesia machine with breathing, Drager and other anesthesia machines * Adult 2300ml anesthetic breathing bag Material: Medical-grade silicone Volume: 2300 ml Bag diameter: ID 22 mm Color: White Sterilization: 134°C Application: GE anesthesia machine with breathing, Drager and other anesthesia machines Origin: G7

Hospital C

Perform frequent SpO2 measurements using the Nihonkohden monitoring device.

20

Set

Type of probe: Finger clip type Cable length: 3.0 m Input connector: 14-pin Range of blood oxygen saturation measurement: 85% - 100% Suitable for Nihonkohden monitors Origin: G7

Hospital C

GE Anesthesia Breathing Machine Oxygen Sensor

2

Female

- Oxygen measurement range: 0 – 100% - Measurement accuracy: ±3% - Response time (T90): ≤ 15 seconds - Linearity: ±2% across the entire range - Output signal: 10-14mV - Shelf life: 12 months - Humidity: 0-95% - Connection: Jack/Module - Specifications: Box/Unit - Suitable for GE anesthesia and breathing machines. Origin: G7

Hospital C

The ability to block multiple times has been achieved.

20

Female

Material: Medical-grade plastic. Expansion ratio: 22mm x 27mm (<±5%)

Hospital C

Surgical light bulb

5

Female

Halogen lamps used for surgical lights (without shades), 24V, 150W

Hospital C

Electrical wire

300

Female

This electrical cable connects to the electric acupuncture device and has a metal clamp. The input end is a square connector with two branches, while the output end is a plastic PVC crocodile clip, suitable for use with the KWD-808 electric acupuncture device (new, 100%).

Hospital C

Electronic scales

1

Female

- Dimensions: 220mm x 170mm x 60mm. Large LCD screen with backlighting, displaying 3 lines (weight, unit price, total cost) - Units of measurement: grams, kilograms - Material: Weighing pan: 304 stainless steel, size: 230x300mm; Housing: Durable ABS plastic, dust-proof, easy to clean - Powered by 220VAC/50Hz or a rechargeable DC 5V battery (high capacity) for continuous use of 80-120 hours - Automatic calibration. Origin: G7

Hospital C

Savior bag

3

Female

Dimensions: (33 x 21 x 22cm) (Length x Width x Height). Material: Durable, tear-resistant cotton fabric with low dust absorption. Color: Typically red (medical standard color). Design: Box shape with handles and a strap, featuring multiple small compartments for organizing supplies. Purpose: For storing first aid kits, bandages, and medications according to regulations.

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 10 cm

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 12 cm

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 14 cm

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 18 cm

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 22 cm

Hospital C

Stainless steel bowl

10

Female

Medical-grade, surgical-use bowls – Material: 304 stainless steel or equivalent – Diameter: 28 cm

Hospital C

Straight

10

Female

Length: 24 cm (±5%), made of stainless steel, conforming to the manufacturer's quality management system standards.

Hospital C

Indoor air quality monitoring with a camera

1

Set

I. COMMON REQUIREMENTS – Brand new device – Manufactured after 2025 – Manufacturer meets ISO 13485 or equivalent quality management system standards. – Power supply: 220VAC ± 10%, 50HZ frequency. – Operating environment: + Maximum temperature: ≥ 30°C + Maximum humidity: ≥ 75% II. CONFIGURATION REQUIREMENTS: 1. Camera-equipped handle: 1 piece 2. Miller No. 0 curved blade: 1 piece 3. Miller No. 1 curved blade: 1 piece 4. Mac No. 2 curved blade: 1 piece 5. Mac No. 3 curved blade: 1 piece 6. Mac No. 4 curved blade: 1 piece 7. Difficult intubation blade: 1 piece 8. Charger: 1 set 9. Carrying case: 1 piece 10. User manual: 1 set III. TECHNICAL SPECIFICATIONS 1. Camera-equipped handle – Rechargeable battery powered handle – Camera: + Resolution: ≥ 3 million pixels + Maximum illumination intensity: ≥ 3000 lux + Maximum field of view: ≥ 100mm - Maximum viewing angle: ≥ 70° - Waterproof function: IPX7 or higher 2. Battery – Rechargeable battery – Battery capacity: ≥ 3400mA 3. Blades – Blade length: + Miller No. 0 curved blade: 85mm, ± 5mm + Miller No. 1 curved blade: 100mm, ± 5mm + Mac No. 2 curved blade: 115mm, ± 5mm + Mac No. 3 curved blade: 130mm, ± 5mm + Mac No. 4 curved blade: 145mm, ± 5mm + Difficult intubation blade: 160mm, ± 5mm - Blades are made of stainless steel - Can be sterilized at temperatures ≥ 134°C IV. OTHER REQUIREMENTS – The device must be approved for market circulation or permitted import according to the Government Decree No. 98/2021/ND-CP dated November 8, 2021, and the Government Decree No. 07/2023/ND-CP dated March 3, 2023, which amends and supplements some provisions of Government Decree No. 98/2021/ND-CP dated November 8, 2021, regarding the management of medical devices; Combined document 04/VBHN-BYT dated January 19, 2026 and other relevant legal documents that are still in effect. – Delivery time: ≤ 3 months from contract signing. – Delivery and installation location: At the point of use. – Commitment to provide CO, CQ, invoice, packing list, freight document, customs declaration when delivering (applies to imported medical devices) – Warranty period: ≥ 12 months from the date both parties sign the acceptance certificate and hand over the goods.

Hospital C

Mercury thermometer monitors vaccine temperature

6

Female

Temperature range: -30 to 50°C Dimensions: 165 x 25 mm

Hospital C

Heat moisture

7

Female

Features and Specifications: Shape: Circular, diameter 20 cm x thickness 2.2 cm Humidity Range: 10% to 90% RH Power Source: None Units: °C / %RH Temperature Range: -20°C to 40°C

Hospital C

The set of internal intubation

5

Set

- Material: CE-certified stainless steel – Medium-sized battery grip – Includes 3 curved blades: * Blade 1: 9 cm in size * Blade 2: 11 cm in size * Blade 3: 13 cm in size - Can be sterilized at temperatures up to 250°F (121°C) for 10-15 minutes. - The light bulb is installed in the blade.

Hospital C

A screwdriver

1

Female

ISO standard. Medical-grade stainless steel, with a ten-point screw head. Used for 2.0mm diameter bone screws. Packaging: 1 piece per bag.

Hospital C

A screwdriver

1

Female

ISO standard. Medical-grade steel, hexagonal head. Used for screws with a diameter of 2.0 mm. Packaging: 1 piece per bag.

Hospital C

A screwdriver

1

Female

ISO standard. Medical-grade steel, hexagonal head. Used for 3.5mm diameter bone screws. Packaging: 1 screw per bag.

Hospital C

A screwdriver

1

Female

ISO standard. Medical-grade steel, hexagonal head. Used for 4.5mm and 6.5mm bone screws. Packaging: 1 piece per bag.

Hospital C

Cylinder cut

1

Female

Capacity: 150 ml, includes a connection for attaching to a specimen container; Origin: G7

Hospital C