Buy replacement beam bulb for 1-plane DSA angiography system

Radiator bulb used for 1-plane DSA angiography system

1

Female

I. General requirements: - 100% new equipment - Year of manufacture: 2025 or later - Manufacturer meets ISO 13485 standards or equivalent - Compatible and synchronously connected with 1-plane DSA Angiography System (Model: Allura Centron; Manufacturer: Philips; Origin: India) - Operating environmental conditions: + Incoming temperature: ≥ 350C + Incoming humidity: ≥ 80% II. Configuration requirements - X-ray bulb used for digital subtraction angiography (DSA) system: 01 piece. III. Technical criteria - Focus: + Small hair: ≤ 0.4mm + Large hair: ≥ 0.7mm + Maximum voltage/ current of small hair: ≥ 9.3V/ 6.2A + Maximum voltage/ current of large hair: ≥ 14.9V/ 6.0A - Operating voltage and current + Normal operating voltage range: ≥ 125kV + Maximum voltage: ≥ 150kV + Maximum operating current: ≥ 800 mA + Operating current in pulse mode: ≥ 160 mA - Anode: + Anode material: Rhenium alloyed tungsten compound anode: RT / TZM + Anode disc diameter: ≥ 200mm. + Anode rotation speed: ≥ 4200 RPM + Anode heat storage capacity: ≥ 1800 kJ (2400 kHU) + Anode's maximum heat output is: ≥ 11kW + Continuous heat output (with rotating Anode): ≥ 3200W + Minimum waiting time when turning off and restarting the anode driving circuit: ≤ 5 minutes + Rotating anode acceleration time: ≤ 60s - Beam filtering: + Equal beam filtering electronic grid (GS). + Maximum grid voltage: ≤ 2.2 kV - Heat storage and cooling: + Direct oil cooling + Heat storage capacity: ≥ 4000kJ (5400kHU) + HV connection pin: 03 (IEC 60526). IV. Other requirements - Warranty period: ≥12 months, from the date of handover and acceptance.

Vietnam - Cuba Friendship Hospital Dong Hoi