Shopping for medical equipment in 2025

Digital X-ray system

1

Set

I. GENERAL REQUIREMENTS - Quantity: 01 system - Quality: 100% new machine - Manufactured from 2025 onwards - Voltage used: 1 phase or 3 phase - Meets minimum quality standards: ISO 9001, ISO 13485 - Origin of main machine belongs to one of the European Union (EU) or Organization for Economic Cooperation and Development (OECD) countries II. CONFIGURATION 1. Digital X-ray system and accessories: 01 system - 01 High-frequency generator and control panel - 01 X-ray tube - 01 X-ray tube column - 01 X-ray beam collimator - 01 4-way movable patient table - 01 Chest X-ray stand with Bucky - 01 High-voltage cable - 02 Flat panel photoreceptors (FPD) - 02 Power boxes - 01 S/W image acquisition and processing software 2. Auxiliary equipment - 2 KVA UPS: 01 set - 01 Work station including PC and monitor - User manual: 01 set III. TECHNICAL SPECIFICATIONS 1. High frequency generator - Power source: ≥40 kW - kV range: ≤40 – ≥125 kV, adjustment step ≤ 1kV - mA range: ≤10 – ≥500 mA - mAs limit: from ≤ 0.1mAs to ≥500 mAs - Scanning time range: 0.001 to ≤ 10s - Anatomical programs (APR): ≥300 parameters - Automatically display error codes on the control panel - Has the ability to control parameters and scan using software on the computer 2. X-ray tube - Tube type: Rotating anode - Number of revolutions at 50Hz: ≥ 2500 rpm - Number of revolutions at 60Hz: ≥ 3000 rpm - Voltage (kV) maximum: ≥ 122 kV - Anode heat capacity: ≥ 130 ZU - Focal point: minimum 2 focal points + Small focal point: ≤ 1.2 mm + Large focal point: ≤ 2.4 mm - Target angle: ≤ 180 - Fixed filter: ≤0.9mmAl / 75kV 3. Collimator - With LED to locate the shooting area, lighting time 1 cycle 30s - Maximum voltage level: ≥150 kV - Light source: LED (≤150W / 24VAC) - Light intensity (SID=100cm): more than ≥160Lux - Filter: equivalent to ≥1.5 mmAl - Largest radiation field (SID=100cm): more than 43 cm x 43 cm - Smallest radiation field (SID=100cm): more than 1 cm x 1 cm 4. Ball bearing column - Runs on a rail attached to the floor - All positions are maintained by an electromagnetic brake operated with a hand-held control located in front of the ball head. - Floor rail length: 3315mm - Left - right movement range: ≥1800mm - Vertical movement range: ≥1450mm (from 350 - 1850 mm) - Front - back movement range: ≥230mm - Electromagnetic lock - Rotation angle around the vertical axis: ±180˚ - Rotation of the horizontal axis (ball assembly and rotating ball stand): ±180 ˚ - Size from ball to Bucky (SID) is displayed by ultrasonic sensor. - Ball rotation angle is displayed on the control panel screen. - Manually move the table and chest x-ray stand and add automatic notification function when preparing to reach the center position. 5. Patient table - Mobile scanning table: 4 directions - Table top mobility: - Horizontal: ± 125mm - Vertical: ± 500mm - Bucky part movement under the table top: ≥245mm - Distance from table top to Bucky: ≥80mm - Filter: aluminum thickness ≥ 0.7mm at 100kV - Cassette size: from 8x10” to 17x17” - Maximum load: ≥300kg - System lock: electromagnetic lock - Table movement control by foot switch 6. Lung scanning stand - Type: vertical movement by motor with electromagnetic brake - Vertical movement range: ≥ 1500mm - Cassette size: from 8x10” to 17x17” - Electromagnetic locking system - Dimensions: 650 x 400 x 2000mm ±10% 7. High voltage cable - 8 m long high voltage cable, with plug set. - Maximum output voltage: ≤150kV 8. Digital X-ray image receiver - Purpose of use: General X-ray - Sensor type: a-Si TFT, Flat Panel receptor - Photosensitive material: CsI - Pixel size: ≤142 - Effective number of pixels: ≥3,000 x 3,000 - Effective pixel area: 17 x 17" (430 x 430mm) - Mechanical signal converted to digital signal: 16-bit - Capture mode: Automatic X-ray detection - Calibration mode: Automatic calibration (ACC mode), manual calibration - Preview image acquisition time: ≤ 1.0 seconds - Image acquisition and processing time: ≤ 2.9 seconds - Energy range: 40-150 kVp - Workstation interface: Gigabit Ethernet - Plate protection (cover): alloy or equivalent - Software upgrade (Firmware): Yes 9. Power box - Power supply for the sensor from 100~ 240 VAC power source (50,60Hz) - Maximum power consumption: ≥75W - Status display: by LED 10. Workstation - PC system configuration • OS: Windows 10-64bit • CPU: i5 • SSD: 512GB • RAM: 16 GB - Screen: ≥ 23” (resolution: Full HD) 11. Image control and processing software - X-ray and image processing - Patient information management - Image acquisition time: ≤ 5 seconds - Method: digital type - DICOM: supports DICOM 3.0 standard, including DICOM Print SCU, MPPS, DICOM Storage SCU, and DICOM Worklist SCU - Backup storage: CD/DVD, Flash Disk (USB3.0)

Z175 clinic

Movie printer

1

Machine

- Quality: 100% new machine - Produced from 2025 onwards the configuration provided - Number of movie trays: 02 trays - Can print film sizes: 20x25, 25x30, 26x36, 35x35, 35x43 cm - Printing capacity: ≥80 film/ hour with size 35 x 43 cm (14 "x 17") - Pixel number: ≥500 dpi dynamic

Z175 clinic

Synthetic teeth

1

Machine

- Quality: 100% new machine - Manufactured from 2025 onwards - Operating voltage: 110-240 VAC / 50-60Hz - Origin of main machine belongs to one of the European Union (EU) or Organization for Economic Cooperation and Development (OECD) countries CONFIGURATION: Dental chair: 01 set, including: 1. Patient chair 2. Main drill tray: 01 piece 3. Assistant tray: 01 piece 4. Glass spittoon: 01 piece 5. LED treatment light 6. Control pedal 7. Dentist chair TECHNICAL SPECIFICATIONS: *Features and technical specifications of dental chair - Hydraulic chair lifting system - Specially designed seat cushion for good back support Headrest with double joints that can be easily adjusted to suit the patient's height - Programs can be pre-installed for each patient - Chair frame is made of sturdy alloy * Patient chair: - Hydraulic chair lifting system - Specially designed cushion for good back support - Headrest with double joints that can be easily adjusted to suit the patient's height. - Programs can be pre-installed for each patient - Chair frame is made of sturdy alloy. - Vertically opening armrests help patients get on and off the chair conveniently. - 01 multi-function foot control pedal controls the movements of the chair and treatment equipment, with a push control system design, the Dentist can easily adjust the speed of the drill as desired. - Smartdrive technology can control the speed of the drill from ≥100-4000 rpm. - The chair can pre-program 3 treatment programs for 3 different Dentists - 02 clean water tanks for the drill system. * Main drill tray: - 2 positions of Steam Turbine (High Speed), with light - 1 position of elbow (Slow Speed) or electric Micromotor (optional) - 1 position of scaling, with light - 1 position of 3-function spray arm - Large multi-function keyboard: easy to operate and display. - Stainless steel tool tray, can be installed on the left or right. - Easy to change the height of the main tray. - Solid and durable mechanical structure. * Assistant tray: 03 positions for holding tools, 01 surgical suction nozzle. 01 saliva suction nozzle, 01 position of 1 3-function spray arm, 01 control keyboard * Glass spittoon: - Can be disassembled for cleaning. - The spittoon drainage system and the water supply to the sensor cup are also equipped through the assistant tray switch. * LED treatment light: - LED bulb with a lifespan of ≥80,000 hours, no shadow. - The lamp provides high-quality white light (≥5,500 Kelvin) and has an additional wavelength filter mode when filling composite. - The lamp head can rotate around three axes and be adjusted diagonally. - On/off control by touch or keyboard or switch. * Control pedal - Multi-function foot control. - Control of auxiliary functions and the most important chair functions "all in one". - Control of different chair positions. * Dentist chair: height adjustable in the range of ≥464 - 646 mm.

Z175 clinic

Endoscopic ENT

1

Machine

- Quality: 100% new machine - Manufactured from 2025 onwards - Voltage used: 110-240 VAC / 50-60Hz 1. General characteristics of production equipment in 2025 onwards, new equipment 100% - Quality standard: ISO 13485 2. The - Full HD synchronous screen: 01 - Synchronous stroller: 01 - Bright conductor: - Instructions for use: 01 set 3. Specifications 3.1. Camera - 1/2.8inch CMOS sensor - Screen ratio: 16: 9 (1920 x 1080) - 5: 4 (1280 x 1024) - resolution: ≥ 1952 x 1116 ~ 2.4 mega pixels - with buttons on the camera body: Zoom & photography button 3.2. The minimum image - Video Out has 3 ports: 1 HDMI, 1 DVI, 1 BNC, 1SDI - White balance function - Color adjustment function - Image enlargement function - Pedal function & 1/2/4 HD standard 3.3. Light source - Power source 220V/50Hz - Consumption: 100W - glossy type: LED - Color temperature: 7000k - The display function of the light intensity - The function of adjusting the light intensity - The display function of 80% light when the turning on - Life life: ≥ 50,000 hours 3.4. Light conductor - Length ≥ 2m - pipe diameter ≥ 4mm - Outer diameter ≤ 10mm - with heat -resistant piece 3.5. Service - Endoscopy 70o: Size: ≤ Ø6mm x ≤185 mm - Endoscopy tube 0o: Size: ≤ Ø4mm x ≤ 175 mm 3.6. Trolley - Anot -cast aluminum casting pillar and powder coating - wheel ф 100mm - Wave for adjustable machine up and down - The tank with adjustable drawers up and down - Hanging scratch -resistant camera - Hanging adjustable screen up/down - There are 3 power drives, with 3.7 switch. Screen - Screen size: ≥ 23 inches - Response time: ≤ 5 ms resolution: ≥ 2560 x 1440 pixels

Z175 clinic

Automatic urine testing machine

1

Machine

- Quality: 100% new machine - Produced from 2025 onwards - Voltage used: 110-240 VAC / 50-60Hz - Origin belongs to one of the European Union (EU) countries or economic development and development organizations (OECD) Feature: Operating modes: General / Each quer Reflection of power ≥300 test/h (maximum 1,000 tests/h) RS232C interface imported ID with barcode reader or keyboard outside the source of 12V DC/3A memory ≥2000 Printing test results: Through compatible thermal printer 10.11 and 12 parameters

Z175 clinic

Automatic immune testing machine

1

Machine

- Quality: 100% new machine - Manufactured from 2025 onwards - Operating voltage: 110-240 VAC / 50-60Hz Configuration - Main machine: 01 unit - Buffer solution 1x480ml: 01 unit - Auffer solution 1x480 mL: 01 unit - Concentrated Washing Buffer 1 liter: 01 unit - Assay cup: 500 units - High voltage buffer 1x380mL: 01 unit - Buffer bottle + white lid: 01 unit - Aufer bottle + black lid: 01 unit - Reagent box: 01 unit - Water container + Lid: 01 unit - Power cord: 01 unit User manual: 01 set Technical parameters: Measurement method: Electrochemiluminescence (ECLIA) - Measurement mode: Batch, STAT (Emergency) - Sample capacity: 86 tests/hour - Fastest initial result time: 9 minutes - Integrated barcode scanner and RFID card reader - RFID card linked with automatic calibration function - Chemical module: + Number of chemical positions: ≥10 positions + Chemical cooling: 4 - 15 oC + Has automatic magnetic particle mixing function - Sample module: + Number of sample positions: ≥30 positions, continuous sample loading + Independent sample barcode + Has STAT mode + Has automatic dilution mode + Sample capacity and type: ≤5 - 100 µL, Serum and Plasma - Needle suction system: + Liquid level detection, blood clot detection, anti-collision function, needle blocking detection + Made of teflon-coated titanium alloy + Suction error: ±5% + Residual contamination rate: ≤ 10^-5 - Reaction module: + Reaction position: ≥100 incubation positions, stable at 37±0.3 oC + Use disposable reaction cups - Control: + Integrated touch screen on the machine + Operating system: Windows10 + Compatible with LIS + Displays chemical status, remaining chemical test numbers, warning when chemicals are running out Minimum test indicators: Cancer markers: CEA, AFP, CA 19-9, CA 15-3, CA 125, HE4, TPSA, FPSA, SCC, CYFRA 21-1, ProGRP, CA242, CA 72-5 Cardiovascular: NT-proBNP, NT-proBNP STAT, CTnl, hs-cTnT STAT, MYO, MYO STAT, CK-MB, CK-MB STAT, H-FABP, d-Dimer STAT, Lp-PLA2, BNP, MPO Thyroid: FT3, FT4, T3, T4, TSH, Anti-TSH, Anti-Tg, Anti-TPO, TBG, TG Hormones: β – HCG, PROG, TESTO, LH, FSH, PRL, E2, AMH, hGH Covid-19: SARS-CoV-2-IgG, SARS-CoV-2-lgM, SARS-CoV-2-N.Ab Bone metabolism: 25-OH VD, CT, PTH Inflammatory status: PCT, hs-CRP, IL-6 Stomach: PG I, PG II, Gastrin-17 Hepatitis: CIV, LN, PIIINP, CG, HA Anemia: Folate, Ferritin, Vitamin B13 Diabetes: C-peptide, Insulin Allergy, autoimmune: IgE, Anti-CCP Infectious: HBsAg, HBeAg, Anti-HCV, HIV Ag+Ab, Syphilis, Anti-HBs, Anti-Hbe, Anti-HBc

Z175 clinic

Electrical syringe

1

Machine

Manufactured in 2025 or later, 100% new Origin: G7 or EU Manufacturer must meet ISO 13485 quality management standards; CE or equivalent Power source: 100-240V AC; 50/60Hz CONFIGURATION Main machine with standard accessories including: - Main machine 01 Machine - Power cord 01 Piece - Transmission pole clamp 01 Piece - User manual in English + Vietnamese 01 Set TECHNICAL REQUIREMENTS General features: - LCD color screen ≥ 4 inches clearly displays - Displays battery capacity with ≥ 5 bars - Has an on-off indicator light - Flexible pole clamp can clamp horizontal or vertical poles while still keeping the machine in the correct position - Has two power sources: AC grid power and battery inside the machine Technical features: - Can use syringes: 5mL, 10mL, 20mL, 30mL, 50/60mL of many brands - Syringes of many different manufacturers (≥ 15 brands) - Injection speed setting range: + From ≤ 0.01 to ≥ 1200 mL/h depending on syringe size + From ≤ 0.01 to ≥ 150 mL/h (using 5mL syringe) + From ≤ 0.01 to ≥ 300 mL/h (using 10, 20, 30 mL syringe) + From ≤ 0.01 to ≥ 1200 mL/h (using 50/60 mL syringe) - Setting steps: + ≤ 0.01 mL/h (speed from 0.01 to 10 mL/h) + ≤ 0.10 mL/h (speed from 10 to 100 mL/h) + ≤ 1.00 mL/h (speed from 100 to 1200 mL/h) + Set speed by knob - Volume of fluid to be injected: + From 0.10 to 100 mL (0.10 mL step) + From 100 to 9999 mL (1.00 mL step) + There is a mode without setting the injection limit, displaying “----.--” – Injection time setting: + From ≤ 1 minute to ≥ 99 hours 59 minutes (≤ 1 minute step) + There is a mode without setting the time limit, displaying “----.--” - Bolus injection rate when pressing and holding the key: + 100 mL/h (using a 5 mL/h syringe) + 100 to 300 mL/h (using a 10, 20, 30 mL syringe) + 100 to 1200 mL/h (using a 50/60 mL syringe) (100.00 mL/h step) - Bolus injection volume when not needed Press and hold the key: + 0.01 to ≥ 10 mL (0.01 step) + 10 to ≥ 100 mL (0.10 step) + 100 to ≥ 999 mL (1.00 step) - Rapid injection time (when no need to press and hold the key): 1 second to ≥ 60 minutes 00 seconds (1 second step) - Display injected volume: + 0 to ≥ 9999 mL - Pressure threshold for infusion line blockage: From 10 to ≥ 120 kPa (There are 10 levels to set) - Rapid injection speed has ≥ 03 speed ranges from 150mL/h to ≥ 1200mL/h depending on syringe size - Alarm in the following cases: + Infusion line blockage + Almost out of fluid + Incorrectly installed syringe piston tail + Incorrectly installed syringe body + Low battery + Re-alarm + START key reminder + Injection rate not set + Infusion volume not set + Infusion rate set greater than infusion volume limit + Preset fluid completion - Safety functions: + Set near-full fluid alarm by time + Select pressure to warn of injection line blockage at ≥ 10 levels + Reduce bolus: Reduce pressure in syringe when encountering blockage alarm + Set speed range limit A (Soft limits) + Set speed range limit B (Hard limits) + Lock keyboard to avoid pressing wrong keys while the machine is operating - Other functions: + Display syringe installation instructions on LCD screen + Display syringe label and size on LCD screen + Switch syringe type + Set injection volume + Set injection time + There is an alarm in Purge/Bolus mode + Delete injected fluid volume + Standby function: Temporarily remove START key reminder function + Set time Waiting time on request: ≥ 24 hours + Adjust the alarm volume + Adjust the keyboard volume + There is an alarm sound when pressing the STOP key + Adjust the brightness of the LCD screen (≥ 5 levels) + Set the date and time + Save and view data: About ≥ 10,000 events + Detect AC power supply + There is an alarm sound when detecting AC power supply + Maintain the vein line open + Delete the injected volume while the machine is operating + Change the speed while the machine is operating + Select the alarm sound melody + Set the setting step ≥ 100 times to shorten the setting time + Bolus injection by pressing and holding the key + Bolus injection without pressing and holding the key + There is an alarm sound when turning off the power - Power consumption: 24VA - Equipped with a lithium ion battery in the machine, continuous operation for about ≥ 12 hours

Z175 clinic

Electrocardiogram

1

Machine

Quality of goods: 100%new equipment. Production from the year: 2025 onwards: Goods are manufactured in countries of the G7 group that meets one of the following international standards: ISO 13485, CE or equivalent of the voltage used: AC 100-240V 50/60 Hz - Main machine: 01 unit - Source wire: 1 unit - Electrocardi cabl Standard sensitive: 10mm/MV polarized voltage: ± 600 MV and greater frequency response: 0.05Hz to 250Hz converter A/D: ≥18 Sampling frequency bits: ≥8000 samples/second AC filter AC: -20dB or less at 50 or 60Hz time constant time: 3.2s or more frequency filter filter: -3DB or less than 0.5Hz color LCD screen (with LED backlight) 7 -inch color LCD screen LCD color, 800x480 dot (with LED backlight) 12 Standard Programs with display: ID, age, gender, height, weight ... Heart rate, RR, PR, QRS, QT time, QTCB, QTCF, Electricity, SV1, RV5 use thermal printing head density density: Yes; 8 dots /mm channel number: 3, 6 channels of printing speed: 5,10,12,5,25,50mm /s ± 3% or lower than storage: USB port: USB2.0 standard, 3 ports

Z175 clinic