Pricing information for goods and medical supplies

2x7cm x 2-layer brain padding foam, radiolucent

10.100

Female

2x7cm brain-cushioning foam, non-woven, sterile. Sterilized with Ethylene Oxide gas. Features a non-woven fabric, making it easy to insert and remove after use. High absorbency and quick drying. Smooth and soft surface. Meets the standards of the Vietnam Pharmacopoeia.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

CuraVAC wound care kit, size L

32

Set

Absorbent material: Made from latex-free materials to maintain a sterile environment. The kit includes: Large absorbent pads (size L): (26cm x 15cm x 3.0cm) - Absorbent pad layer: Ensures a sealed environment and maintains negative pressure. - Suction tube: Connects to the drainage system, removing fluid from the wound. - Central suction disc: Distributes negative pressure over the wound surface. - Negative pressure: Recommended level of -125 mmHg, which can be adjusted depending on the severity of the wound and the doctor's instructions. - Dressing change frequency: The negative pressure dressing should be changed every 48-72 hours, depending on the condition of the wound. For infected wounds, dressings need to be changed more frequently.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

CuraVAC wound care kit, size M

52

Set

Absorbent material: Made from latex-free materials to maintain a sterile environment. The kit includes: Medium size (M) absorbent pad: 18 x 12.5 x 3.2 cm - Absorbent layer: Ensures a sealed environment and maintains negative pressure. - Suction tube: Connects to the drainage system, removing fluid from the wound. - Central suction disc: Distributes negative pressure over the wound surface. Negative pressure: Recommended level of -125 mmHg, which can be adjusted depending on the severity of the wound and the doctor's instructions. Frequency of dressing changes: The negative pressure absorbent pad should be changed every 48-72 hours, depending on the condition of the wound. For infected wounds, dressings need to be changed more frequently.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

CuraVAC wound care kit, size S

10

Set

Absorbent material: Made from latex-free materials to maintain a sterile environment. The kit includes: Small absorbent pads (size S): 10 x 7.5 x 3.2 cm - Absorbent pad layer: Ensures a sealed environment and maintains negative pressure. - Drainage tube: Connects to the drainage system, removing fluid from the wound. - Central suction disc: Distributes negative pressure over the wound surface. Negative pressure: Recommended level of -125 mmHg, which can be adjusted depending on the severity of the wound and the doctor's instructions. Frequency of dressing changes: The negative pressure absorbent pad should be changed every 48-72 hours, depending on the condition of the wound. For infected wounds, dressings should be changed more frequently.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

False eyelashes - Sterile, transparent, waterproof adhesive

100

Pieces

Clear, waterproof, latex-free polyurethane (P.U.) film measuring 6cm x 7cm, with breathable properties that allow for oxygen exchange and moisture evaporation. Rounded corners on all four sides prevent edges from peeling. Acrylic adhesive with a strength of 440g/12mm ± 30g and a tensile strength of 2.0kg/12mm ± 200g, safe for all skin types. Used to secure dressings, fix catheters, and secure medical devices on the skin. Individually sterilized using E.O gas.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Large eyelash patch

50

Pieces

Intended for ophthalmic surgery. Size: 10x12 cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Small size eyelash patch

50

Pieces

Intended for ophthalmic surgery. Size: 6cm x 7cm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Microcell nasal bleeding control swab

20

Pieces

- Made of safe and soft PVA material; Highly absorbent, wired - Maintains a moist environment and promotes wound healing - Fiber-free and latex-free, causing no side effects. - Standards: CE, FDA - Dimensions: 80×20×15mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Self-absorbable hemostatic foam 7cm x 5cm x 1cm

948

Pieces

Gelatin-based self-dissolving gauze, 70x50x10mm. Easy to use and effective for stopping bleeding. High absorbency up to 50 times its own weight. Can be shaped as needed. Completely dissolves within 3-4 weeks. Sterile packaging.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

10cm x 20cm hemostatic gauze

36

Pieces

10x20cm gauze pads are made from 100% oxidized regenerated cellulose, a plant-based material. They provide quick and effective bleeding control suitable for various surgical procedures. Can be cut to the desired shape. Fully absorb within 2-3 weeks. Packaged in a sterile box of 5 pieces.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Bone wax (Hemostatic wax)

178

Package

A blend of purified beeswax (80%) and isopropyl palmitate (20%). Light yellow in color with a characteristic beeswax scent. Provides excellent hemostasis, effective clotting, non-absorbable, and sterilized via gamma irradiation. Available in 2.5g per piece.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Various sizes of polymer hemostasis clips with locking mechanisms (Hem-O-Lok clips)

272

Female

- Polymer material - Diameter: 2 - 16 mm - Zigzag design for anti-slip properties, with a secure lock that can be re-opened - Clip-on design with hook function provides safe opening and closing, optimal locking - Up to 30 days of use - Sterilized

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Titan blood collection clips in various sizes

12

Female

V-shaped, slot-style clips. The cross-cut notches on the Horizon clip's legs maximize the surface contact between the clip and the tool jaws, preventing slippage. Made of titanium.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Negative pressure drainage set with a Y-shaped connecting tube.

10

Female

Medical-grade PVC material, with three springs for pressure application, a 400ml capacity, and dimensions of 10-18 French. Features a convenient anti-reflux valve for easy operation. Y-shaped connector, with a Trocar-style tubing that includes a 3-way rotary head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Negative pressure suction device

476

Set

Negative pressure suction tube, 400ml capacity. Material: PVC/Stainless Steel. Suction tube diameter: 0.32 cm. Trocar length: 12.7 cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Insulin syringe

16.000

Female

1ml syringe for insulin injection, with a protective needle tip cap and a plunger cover to prevent foreign objects from entering the syringe during use. - The syringe is available in two sizes suitable for 40UI and 100UI medications. - The needle has a 3-sided bevel for precise injections and smooth surface. The needle body is made of stainless steel. - The needle is permanently attached to the barrel, and cannot be removed. - Needle sizes are: 31Gx6mm, 32Gx6mm. - The product is sterilized using Ethylene Oxide (E.O) gas. - Origin: Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

1 ml plastic syringe with needle

2.000

Female

- The 1ml syringe is made from transparent, smooth, non-warped, and featureless virgin plastic. It has clear volume markings. - The needle is made of stainless steel, sharp, and with a 3-fluted design. The needle size is 26Gx1/2". The colored needle shaft helps differentiate between different needle sizes according to international standards and is securely attached to the needle body, preventing leakage and ensuring safe use. - The product has been sterilized using Ethylene Oxide (E.O) gas. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

10ml plastic syringe with needle

267.990

Female

- The 10ml syringe is made from transparent, smooth, non-warped, and three-way-free virgin plastic. It features clear volume markings. - It can draw up to a maximum of 12ml, with the smallest marking ≤0.2ml. - The plunger has a notched design for easy disposal, and it does not have three-way ports. - The needle is made of stainless steel, sharp, and bevelled on three sides. Available in sizes 23Gx1" and 25Gx1". The needle shaft features color-coded markings to differentiate between sizes according to international standards, and it is securely attached to the needle body, preventing leaks and ensuring safe use. - The product is sterilized using Ethylene Oxide (E.O) gas. - Made in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

20ml plastic syringe with needle

22.172

Female

- The 20ml syringe is made from transparent, smooth, non-warped, and three-way-free virgin plastic. It features clear volume markings. - The plunger has a notched design for easy breakage and does not have three-way openings. - The eccentric tip facilitates easy air expulsion. - The needle is made of stainless steel, sharp, and with a 3-fluted design. The needle size is 23Gx1". The needle shaft is color-coded to differentiate between sizes according to international standards and is securely attached to the needle body, preventing leaks and ensuring safe use. - The product undergoes ethylene oxide (E.O) sterilization. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

3ml plastic syringe with needle

43.394

Female

- The 3ml syringe is made from transparent, smooth, non-warped, and featureless virgin plastic. It has clear volume markings. - The plunger features a notched design for easy breakage and does not have any side holes. - The needle is made of stainless steel, sharp, and with a 3-sided bevel. Available in sizes 23Gx1" and 25Gx1". The needle shaft is color-coded to differentiate between sizes according to international standards and is securely attached to the needle body, preventing leaks and ensuring safe use. - The product is sterilized using Ethylene Oxide (E.O) gas. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Plastic syringe, 50ml, with needle

5.476

Female

- The 50ml syringe is made from transparent, smooth, non-warped, and three-hole-free virgin plastic. It features clear volume markings. - The plunger has a notched design for easy breakage and does not have three holes. - The small barrel securely fits all sizes of needles, ensuring safe use. - The eccentric tip facilitates easy air expulsion. - The pump has volume markings up to 60ml, with the smallest increments ≤ 1ml, making it convenient for children to use. - Made in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

50ml plastic syringe (without needle), suitable for feeding

5.898

Female

- The 50ml syringe is made from transparent, smooth, non-warped, and featureless medical-grade plastic. - The plunger has a notched design for easy disposal after use. - The large barrel end fits snugly around the feeding tube. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

5ml plastic syringe with needle

293.444

Female

- 5ml syringe made from transparent, smooth, non-warped, and featureless virgin plastic. Clear volume markings. - Can draw up to 6ml due to the graduated scale. - The plunger has a notched design for easy disposal, with no side holes. - The needle is made of stainless steel, sharp, and with a 3-fluted tip. Available in sizes 23Gx1" and 25Gx1". The needle shaft features color-coded markings to differentiate between sizes according to international standards, ensuring secure attachment and preventing leakage during use. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Butterfly-shaped earrings, numbers 23-25G

60.464

Female

- Butterfly-style 2-wing needle set, sizes 22Gx3/4", 23Gx3/4", 25Gx3/4". - PVC virgin plastic tubing, ≥30cm long, free of DEHP. - Stainless steel needles, sharp and beveled 3-sided tip, smooth surface, with protective cap. Features a Luer lock connection. - Packaging includes two 2.8x2.8 cm EO gas purging paper to remove residual EO gas during sterilization. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kim get medicine of all sizes

236.600

Female

Needles: 18Gx1 1/2", 20Gx1 1/2", 23G x 1" - Pack of needles with color-coded markings to differentiate sizes. - Made in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

COOPDECH automatic infusion pump (single-use, without PCA)

50

Female

- The infusion pump is made of latex-free plastic and features automatic, precise, and stable continuous pumping. - Capacity: 200ml/300 ml - Includes a 3-speed adjustment valve: 2.0/3.0/5.0 ml/hour; 3.0/5.0/8.0 ml/hour - IQ valve: The drug delivery port is a two-way valve that ensures the medication does not leak during use, while still allowing for easy removal when needed. - Air filter: A 0.2 µm filter automatically removes all types of air in the medication solution before it enters the patient. - Includes a scale to measure the amount of medication in the pump. - Accessories include: Pump, label for recording information, and carrying bag for the pump. - The product is sterilized and packaged according to manufacturer standards.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The COOPDECH automatic infusion pump includes a one-time use PCA (pulse control apparatus).

20

Set

- The infusion pump is made of latex-free plastic and features automatic, precise, and stable continuous pumping. - Capacity: 120ml, operates continuously and independently. - Basal flow rate: 1.0 ml/hour - PCA pump with a 1ml capacity and a bolus time of 10 minutes per dose. - IQ valve: The drug delivery port is a one-way valve that ensures the medication cannot leak out during use, and prevents accidental removal of medication. - Air filter: Two 0.2 µm air filters remove all gases from the solution before it enters the patient. - Accessories include: Main pump, PCA pump, labeling tags, and carrying bag for the pump. - The product is sterilized and packaged according to manufacturer standards.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sets of medicine storage bags for automatic syringes

740

Set

- Set of drug pouches compatible with the Fornia electronic infusion pump, with capacities of 100ml/175ml/250ml/300ml - Includes a clip for controlling flow rate. - Features a filter to control air and particles in the medication. - One-way valve to prevent backflow. - The pouch design is intended for simultaneous use with the pump, ensuring secure attachment via a key. Suitable for the following dosage ranges: - LOAD range: 0-30ml/T (increase by 0.1 from 0-10ml; increase by 1 from 10-30ml) - PCA range: 0-20ml/T (increase by 0.1 from 0-10ml; increase by 1 from 10-20ml) - CONT range: 0-50ml/H (increase by 0.1 from 0-10ml; increase by 1 from 10-50ml)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

200ml single-channel contrast injection syringe set

60

Set

200ml single-channel contrast injection syringe for the Medrad Vistron CT. Features high pressure (355 psi), Luer lock. Quick draw syringe for easy filling. Made of safe, DEHP-free Polyethylene Terephthalate. Package includes: 1 syringe with an inner diameter of 4.75cm and a length of 18.47cm, 1 straw, 1 150cm anti-twist connection tube with Luer lock. Compatible with the Medrad Vistron CT. Includes a quick detection mark to indicate if the syringe has been filled with contrast. Sterilized by ion beam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Two-way 65/115ml syringe set

20

Set

Two-channel drug delivery cannulas for the Medrad Spectris Solaris EP system. Designed to withstand high pressure (350 psi), with a Luer lock. Filled using a spike. Made of safe, DEHP-free Polyethylene Terephthalate. The package includes: 1 x 65ml two-channel cannula with an inner diameter of 2.7cm, 1 x 115ml saline solution cannula with an inner diameter of 3.6cm, 2 spikes, 1 x 150cm anti-twist T-connector with a Luer lock. Compatible with the Medrad Spectris Solaris EP system, featuring a quick identification mark to indicate whether the cannulas have been filled with medication. Sterilized using ion radiation.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kim threads venous numbers

35.612

Female

The Kim catheter features a winged tip, with ports for various sizes of catheters: 14G, 16G, 17G, 18G, 20G, 22G, and 24G. The needle is made of 304 stainless steel with a 3-angled bevel design. It uses Fluorinated ethylene propylene (FEP) tubing with three radiopaque channels, allowing for up to 96 hours of retention within the blood vessel. Sterilization is achieved using Ethylene Oxide.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The Kim 18-24G intravenous catheter features a protective metal tip.

4.600

Female

- Features a protective metal spring mechanism with two crossed arms. - 3-faceted, pointed tip for maximum sharpness. - Made of plastic catheter. - Includes 4 internal radiopaque markers. - Waterproof membrane to prevent blood leakage during insertion, with a closure button.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Blood sampling needle

2.000

Female

The doctor uses a stainless steel needle to draw blood from the patient. The needle has a sharp, pointed tip. Each needle is sterilized before use.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

23G blood retention needle for stomach and intestines

2

Box

Disposable blood collection needle Working length: 1650 mm - 2300 mm Needle diameter: 23G Needle length: 4 - 5 mm Minimum channel diameter: 2.8 mm Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kim poke, spinal anesthesia numbers

2.700

Female

1. Three-fluted needle with sharp tips, reducing the risk of hematoma formation under the dura. 2. External diameter of the outer cannula ranges from 1.25mm - 0.41mm, with thin walls for good flow; fluted length ranges from 4.39mm - 1.23mm. 3. External diameter of the inner cannula, corresponding to sizes 18G/20G/21G/22G/25G/27G, is 0.9mm, 0.6mm, 0.5mm, 0.45mm, 0.3mm, and 0.22mm respectively. 4. Transparent polypropylene (PP) cannula with a central channel for easy visualization of cerebrospinal fluid; multiple lateral grooves provide secure grip. 5. EO sterilization.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The winged epidural catheter is used for administering anesthesia during various procedures.

200

Female

Percutaneous Hard Tissue Nerve Block Needle: Stainless Steel Material Features: Tuohy-style needle with depth markings, transparent needle shaft, caliber-coded needle tip, removable wings for better control. - Needle diameter from 18G to 27G. Length 90mm (3 1/2"). * EO sterilized, non-toxic, and pyrogen-free

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Neurology needle

100

Female

- Materials: PVC, PP, EP, stainless steel, tinplate, copper, PTEE (Polytetrafluoroethylene), Polyester. Markings on the body aid in proper handling and allow for accurate determination of needle penetration depth. The outer coating allows the needle to glide smoothly through tissue layers, with a 30° bevel design. Transparent needle handle with multiple grooves for easy gripping, and a connecting tube for administering medication. Needle sizes: 24Gx1'', 22Gx1'', 22Gx13/8'', 22Gx2'', 21Gx2'', 21Gx4'', 20Gx6''.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The patient underwent a percutaneous nerve block using Perifix 420/421.

50

Set

The Kim with a rounded tip: Includes a resistance reduction pump to accurately define the hard disk cavity. The catheter head is made of polyamide and polyurethane, with a gradually tapering design and embedded contrast agent. Features a click-lock catheter connector. A filter with a 0.2 micron pore size, along with an adhesive for securing the filter. Comes with all necessary pumps and syringes. Ensures safe and sterile injection.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Combined epidural and spinal anesthesia kit, 18G needle, 88mm (3 1/4") long.

5

Set

Kim with a 18 gauge, 3 1/4" long needle; G27 epidural anesthesia needle; Transparent needle handle with multiple secure grooves for easy handling, even when wearing wet gloves; Polyimide catheter material that is resistant to bending and breaking, 1000mm long, with an embedded radiopaque marker; Catheter connector with a flip-top design to prevent excessive twisting and clogging; Syringe with reduced resistance (LOR) to easily and accurately identify the dura space; Filter with a 0.2 micron pore size for safe and sterile injection.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Artificial renal artery needle

28.077

Female

Kim is a 16G, 25mm long catheter. The metal core is thin and has silicone coating inside. The tip of the catheter has different colored markings to distinguish between sizes and types of rotating tips. The tubing is 30cm long. There is an opening (backeye) at the end of the catheter with black/red markings indicating the bevel of the tip. It is sterilized using ethylene oxide gas, with a color-changing sterilization indicator on the packaging (red -> green). The maximum penetration force (Fmax) at the tip is ≤ 1.2N. The connection to the blood transfusion set can withstand static pulling forces > 15N for 15 seconds. It contains no DEHP (Di(2-ethylhexyl) phthalate).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Artificial Kidney Vein

28.077

Female

Kim is a 17G, 25mm long catheter. The tip of the kim is thin and coated with silicone on the inside. The wings are color-coded to differentiate between sizes and types of rotating wings. The wire length is 30cm. There is a small opening (backeye) at the tip of the kim, with black/red markings indicating the bevel of the tip. It is sterilized using ethylene oxide gas, and the sterilization indicator changes color on the packaging (red -> green). The maximum penetration force (Fmax) is ≤ 1.2N. The connection to the blood transfusion set can withstand a static pulling force > 15N for 15 seconds. The material does not contain DEHP (Di(2-ethylhexyl) phthalate).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Gastric and intestinal biopsy forceps, crocodile-shaped biopsy tool

3

Female

Disposable Crocodile Jaw Biopsy Forceps: The perforated sheath allows for easy insertion into the cavity. The larger collection cup facilitates larger biopsy samples. The unique SwingJaw™ mechanism enables convenient angled biopsies. The crocodile jaw prevents slippage. Different colored sheaths make it easy to identify compatible areas. Working length: 1550 mm - 2300 mm. Minimum channel diameter: 2.8 mm. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical retractor with a hole for use in the stomach and intestines.

2

Female

Disposable biopsy forceps with holes for use in the stomach and intestines; larger sample collection cup with a hole; unique SwingJaw™ mechanism supports tangential biopsy; color-coded casing for easy identification of compatibility with the area; working length 1550 mm - 2300 mm; minimum channel diameter 2.8 mm; origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Disposable biopsy needle

20

Female

Available with or without needles; oval or round jaws. Working length ranges from 160cm to 230cm, compatible with a minimum working channel diameter of 2.8mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Acupuncture needles

288.200

Female

Sterile single-use acupuncture needles – Sterile, hand-held (trocar) needles are uniformly coiled with a single medical-grade steel wire, have a consistent silver-colored coating, and lack wrinkles. – The needle shaft is made of specialized steel that conducts electricity well and has good corrosion resistance. The needles use 06Cr19Ni10 (S304) stainless steel, which offers excellent corrosion resistance when stored under standard conditions. – The needle shaft features a circular coil for electrical conductivity. – The needle shaft is securely attached to a guide rod with a diameter three times that of the needle shaft. – The needle tip is sharp and tapered, reducing resistance when penetrating skin, making it convenient and painless for users during procedures. – The needle tip does not have any hooks or bends after applying standard pressure and puncture force. – The needle tip is polished to a smooth, sharp edge without any burrs, ridges, or hooks. – Puncture Force: 0.8N – Needle shaft hardness: (460-655) HV according to the Vickers scale. – Needle surface Ra ≤ 0.63 µm. – The needles are packaged in sterile, single-use containers that have undergone proper sterilization, ensuring SAL10-6 sterility. – Safe and easy to use design, saving time. – Single-use or reusable after autoclaving. – Available in a variety of sizes.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Dropping tube, with a two-section (rigid-flexible) counting chamber

9.190

Fiber

- Length: 180 cm - Inner diameter: 3 mm. Outer diameter: 4.1 mm. Pressure resistance: 2 bar - Two-chamber design with a rigid, soft tip – includes a 15µm filter membrane in the tip. Tip volume ≥ 15 ml. Features automatic air removal and drainage – Needle made of virgin PS material – Luer lock twist-off head. - Safe Y-shaped syringe port, latex-free - Secure locking clamp for flow control device. - Virgin PVC tubing, soft and free of DEHP toxins, replaced with safe DEHT/DOTP. - Suitable for use with automatic infusion pumps - EO gas sterilization - Manufactured in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Disposable Infusion Set

160.000

Set

- The syringe is made of virgin ABS plastic, and the air outlet features a sterile filter membrane. - The adjustment clamp is made of virgin PP plastic, with a design that includes clips for securing the tubing to ensure safe use. - The drip chamber has a volume of ≥8.5ml and a ≤15µm filter membrane. - The tubing is made from virgin PVC plastic; the length of the tubing is ≥1700mm. - The tubing comes with a 23Gx1" needle. - The Luer lock connector has a rotating mechanism that allows for secure and easy attachment to the needle, as well as ease of use. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Viscous cord of all sizes

3.770

Fiber

Numbers: 5-6-8-10-12-14-16-18. The product consists of two parts: the valve and the tubing. The tubing is made from virgin PVC plastic without DEHP, transparent, smooth surface to prevent damage and scratching of the lining, with two auxiliary suction ends for sucking. The tubing has a length ≥ 50cm. The valve is divided into multiple colors for easy identification, and comes in two types: with and without caps. The packaging includes two 2.8x2.8 cm EO gas release sheets to remove residual EO gas during sterilization. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electrical syringe wire of all sizes

1.670

Fiber

- Individually packaged and sterilized, with clearly marked openings for easy access, expiration dates printed on the packaging. Flexible, transparent, and resistant to twisting. - Inner diameter ≤0.9 mm - Outer diameter ≤1.9mm - Available in various lengths: 30.75 cm, 140 cm, 150 cm - Flow rate ≥ 0.9 ml/minute; pressure ≥ 2 bar - Luer Lock connector, high pressure resistant, leak-proof; with a positive pressure lock to prevent backflow (with a locking clip) - Made in Vietnam. Sterile. Single use

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical suction line (2000 mm)

5.000

Fiber

- The cable is made from virgin PVC plastic. Outer diameter of the tube: 7.7/9.9/10.5 mm. Inner diameter of the tube: 5/6.3/7.7 mm. Tube length: 2m, with two connection ends for a secure fit to devices. The outer surface of the cable tube has a protective groove that is flexible and highly elastic, capable of withstanding high negative pressure (-75kpa) without deformation. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ventilator connector (Cathere mount)

2.460

Female

High-frequency ventilator tubing, multi-directional type, made from medical-grade polypropylene plastic. – The components include: a breathing tube section, an end connector, a port cover, and flexible T-shaped connectors. – Integrated CO2 measurement and drainage ports. – Sterilization: Ethylene Oxide

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

2 -branch oxygen breathing wire of numbers

8.720

Fiber

- Medical-grade PVC material, including tubing and nasal cannula - Soft, non-kink tubing. Smooth surface. - Soft, flexible tip with two straight white plastic tubes for insertion into the nose, without any coloring agents. - Total length of tubing ≥2500mm, outer diameter of main tube ≥5mm, inner tube with ridges to prevent bending. - Sizes: newborn, child, and adult. - Packaged in 1 piece/bag and sterilized by EO gas. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Blood collection set (with needle)

986

Fiber

The syringe is made from virgin ABS plastic; The plunger is made of virgin PP plastic and features a clip design for safe use; The air outlet has a sterile filter membrane; The drip chamber has a fluid filter. The tubing is made of virgin PVC, soft, durable, highly elastic, and does not kink during storage and use; The Luer lock connector has a rotating mechanism for secure and easy connection to the needle; The tubing is ≥1600mm long and made of virgin PVC, non-toxic, EO gas sterilizable. Needle size: 18Gx1/2'. Filter pore size at the tip: 200µm, flow rate: 20 drops/ml - Manufactured in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Gloves examination of numbers

191.150

Pair

- Manufactured to TCVN 6343 standards. Made from high-quality natural rubber (centrifugally separated to remove impurities, toxins, and allergens), with a non-stick coating, good absorbency, and does not irritate the skin. The product is manufactured using advanced technology. Not sterilized. Suitable for both left and right hands, ambidextrous, durable, tear-resistant, seamless, with an edge, rough or smooth surface, fits comfortably in the palm of the hand, and easy to use. - Length (min): 240 mm - Thickness of one layer (min): 0.08mm - Width: XS size: 70±10mm; S size: 80±10mm; M size: 95±10mm; L size: 111±10mm; XL size: ≥ 110 mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Non-powdered examination gloves, various sizes

100

Pair

Natural latex gloves, powder-free, average length of 240mm. Thickness: minimum 0.08mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sterile surgical gloves in sizes (6.0; 6.5; 7.0; 7.5)

102.000

Pair

- Manufactured to standards: ISO 10282-2014 and TCVN 6344. Made from natural rubber, powder-free gloves, and polymer-coated gloves. Products are manufactured using high-quality technology. Sterilized by EO gas, sterilized in pairs. Gloves have separate left and right hands, are durable, non-torn, non-punctured, with reinforced edges, a textured surface, and fit comfortably around the palm, making them easy to use. The gloves provide electrical insulation for high-frequency surgical devices. - Sterile surgical gloves manufactured according to ISO 10282:2014 and TCVN 6344 standards. - Length (min): 280 mm - Thickness of one layer: 0.15 ± 0.03 mm - Width: No. 6.5: 83±5mm; No. 7.0: 89±5mm; No. 7.5: 95±5mm; No. 8.0: 102±6mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Tyvek bag 250mm x 70m

5.000

Bag

Tyvek pouch in roll suitable for VH2O2 sterilization methods. – High resistance to penetration and fiber abrasion. Size: 250mm x 70m. The pouch consists of two sides: – Tyvek® paper side: made from exclusive Tyvek® produced by Dupont, with antibacterial properties according to ASTM F1608 standard, achieving 4.7 with Tyvek 1059B. Weight: 64.4gsm (61.7-67.1), thickness: 157µm. – Film side: A composite polymer from PET/PE with a weight of 53gsm. – Welding temperature: 190°C-230°C. – Uniform, tight, non-splitting welds, with a 3-way heat sealing edge to prevent recontamination. Continuous, uninterrupted welding and stretching lines, straight without deviation. – Clearly visible Green -> Pink color change indicator after exposure to H2O2 Hydrogen Peroxide sterilization process. – Shelf life: 3 years

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Tyvek bag 350mm x 70m

5.000

Bag

Tyvek pouch in roll suitable for VH2O2 sterilization methods. – High resistance to penetration and fiber abrasion. Size: 350mm x 70m. The pouch consists of two sides: – Tyvek® paper side: made from exclusive Tyvek® produced by Dupont, with antibacterial properties according to ASTM F1608 standard, achieving 4.7 with Tyvek 1059B. Weight: 64.4gsm (61.7-67.1), thickness: 157µm. – Film side: A composite polymer from PET/PE with a weight of 53gsm. – Welding temperature: 190°C-230°C. – Uniform, tight welding lines that do not peel off, with a 3-line heat sealing design to prevent recontamination. Continuous, uninterrupted welding lines, straight and without deviation. – Clearly visible Green -> Pink color change indicator after exposure to H2O2 sterilization process. – Shelf life: 3 years

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

100mm x 200m sterilization and steaming bag

6

Roll

Perfecta's excellent 100mm x 200m sterilization film rolls include: - One layer of clear, flat film (made with special polyethylene and propylene polymers) - One white, medical-grade, water-resistant paper layer designed to ensure high sterility. The clear film layers are manufactured according to the required standards. Suitable for steam and ethylene oxide (EtO) sterilization: The color indicators on the sterilization bags change as follows: The pink indicator turns yellow when sterilized with EtO gas, and the blue indicator turns black when sterilized with 121°C to 134°C steam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

High-quality, 200mm x 200m autoclave sterilization bag

16

Roll

Perfecta's excellent roll of sterilization film: 200mm x 200m. Includes: - 1 layer of clear, flat film (made with special polyethylene and propylene polymers) - 1 white, non-woven medical-grade paper layer designed to ensure high sterility. The clear film layers are manufactured according to the required standards. 2. Suitable for steam sterilization and ethylene oxide (EtO): The color indicator on the sterilization bag changes as follows: The pink indicator turns yellow if sterilized with EtO gas, and the blue indicator turns black if sterilized with 121°C to 134°C steam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

High-quality, 300mm x 200m autoclave sterilization bag

12

Roll

Perfecta's excellent 300mm x 200m sterilization bag includes: - One layer of clear, flat film (made with special polyethylene and propylene polymers) - One white, waterproof paper layer designed for medical use to ensure high sterility. The clear film layers are manufactured according to the required standards. Suitable for steam and ethylene oxide (EtO) sterilization: color indicators on the sterilization bag change as follows: Pink turns yellow when sterilized with EtO gas, and blue turns black when sterilized with 121°C to 134°C steam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

1800ml pleural fluid drainage bottle with connecting wire

10

Female

* Design: Clear, upright plastic bottle. * One-way water seal mechanism prevents air and liquid from flowing back into the lungs. * Graduated markings (every 50ml) * Includes a tight-fitting cap and 180cm tubing. * Individually EO sterilized packaging

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

One-piece adult anal plug, drainable type

20

Female

Single-piece, disposable anal insert – Available in opaque or transparent – Comfortable use with non-woven, absorbent outer material and a specially designed 5-layer membrane that prevents leakage of liquid and odor. The number on the pouch helps with traceability, including date and product code. - Includes activated carbon filter. - Features an adhesive hydrocolloid layer around the absorbent pad, which is hypoallergenic and gentle on the skin, providing leak protection. - Comes with a pull-up closure. - Size 12-70mm. - For single use.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Urine bag

2.550

Female

- Made from virgin PVC plastic, non-toxic. - Capacity of 2000ml, thickness of 1.2mm, with clear markings for every 100ml. Ensures a leak-proof seal. Includes an angled marking chart to allow for the tracking of very small amounts of urine (25ml) in cases of patients with urinary retention. - T-shaped drain valve at the bottom, preventing backflow, and a 90cm inlet tube. Features a PVC plastic hanging strap. - The bag includes a basic patient information chart: name, bed number, room number. - Product sterilized using Ethylene Oxide (E.O) gas. - Manufactured in Vietnam.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-lumen endotracheal tube with or without markings

16

Female

- Material: Made of silicone PVC plastic, not latex. - Features a soft strap for easy fastening. - Available in sizes 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, and 10.0. - Also available without cuffs in sizes 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Double-lumen tracheostomy tube with balloon and numbered window

8

Female

- The connector can rotate freely in any direction. - The inner tube is designed for easy disassembly and reassembly using a twist-lock mechanism. - The tubes are made of polyurethane (PU) plastic with radiopaque material to aid in X-ray detection. - The obturator balls are made of ultra-thin PU. - Suitable for use during MRI procedures. - The tube has a window for patient speech therapy. - Can be stored for up to 29 days. - Sizes: 7.0 (ID=7.0 mm, OD=10.6mm, ball diameter=23mm), and 8.0 (ID=8.0 mm, OD=11.7mm, ball diameter=26mm). - The package includes: Tracheostomy tube, 2 replacement cannulas, neck strap, obturator balls, and tube cover.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Two-lumen endotracheal tube with a closed tip

8

Female

- The connector can rotate freely in all directions. - The inner tube is designed for easy disassembly and reassembly using a twist-lock mechanism. - The tubes are made of polyurethane (PU) plastic with radiopaque properties to aid in X-ray detection. - The obturator tips are made of ultra-thin PU material. - Suitable for use during MRI procedures. - Can be stored for up to 29 days. - Sizes available: 7.0 (ID=7.0 mm, OD=10.6mm, tip diameter=23mm), and 8.0 (ID=8.0 mm, OD=11.7mm, tip diameter=26mm). - The package includes: Tracheostomy tube, 2 replacement cannulas, neck strap, obturator tips, and tube cover.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

2 -barreled air trache opened, with windows

8

Female

- The connector can rotate freely in all directions. - The inner tube is designed for easy disassembly and reassembly using a twist-lock mechanism. - The tubes are made of polyurethane (PU) plastic, with a reflective coating to aid in detection during X-ray imaging. - Suitable for use during MRI procedures. - The tube and two replacement tubes have windows for patient speech therapy. - Can be used for up to 29 days. - Sizes: 7.0 (ID=7.0 mm, OD=10.6mm), 8.0 (ID=8.0 mm, OD=11.7mm). - The kit includes: Tracheostomy tube, 2 replacement cannulas, neck strap, obturator, and tube cover.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Non-transparent, windowless endotracheal tubes

10

Female

- The connector can rotate freely in any direction. - The inner tube is designed for easy disassembly using a twist-lock mechanism. - The tube is made of polyurethane (PU) plastic and contains a radiopaque material to aid in detection during X-ray imaging. - Suitable for use during MRI scans. - Can be stored for up to 29 days. - Sizes: 7.0 (ID=7.0 mm, OD=10.6mm), 8.0 (ID=8.0 mm, OD=11.7mm). - The kit includes: Tracheostomy tube, 2 replacement cannulas, neck strap, obturator, and tube cover.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Endotracheal tubes (sizes from 2.5mm to 8.5mm)

20

Female

Sizes: 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm. Available with and without a bevel; standard 15mm connection. Made of high-quality, flexible, smooth plastic that is resistant to breakage and does not irritate the skin. Smooth, soft tip for gentle insertion. Soft, non-fragile balloon; appropriate curvature in the tube body with 1cm markings. EO gas sterilization. Individually packaged in smallest units.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Spring-loaded endotracheal tubes (sizes 3.5mm - 8.0mm)

752

Female

This type features a spring and a ball made from transparent, non-toxic PVC coated with silicone. It is designed to protect delicate, sensitive tissues and withstand pressure and twisting forces. It has a standard 15mm connection for compatibility with round connectors. The smooth, rounded end facilitates insertion into the endotracheal tube during anatomical procedures, and it includes a 1cm scale marking. This product is sterile and single-use.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Pulmonary catheter numbers

32

Female

Pulmonary tubes, sizes CH 16, 20, 24, 28, 32, 36. Made of biocompatible plastic, soft and transparent to minimize trauma. The clear tube allows for easy monitoring of drainage. The large diameter within the tube ensures proper drainage. Dimensions and diameters are indicated on the product: Agyle Fr 24 : 8.0 mm x 20" L : 55cm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Trocar-equipped chest tubes (sizes)

5

Female

* Used for drainage after cardiac, chest, and thoracic surgery * Coiled tip with rounded end and multiple smooth drainage holes * Radiopaque tubing marked every 2 cm from the distal end to aid in determining placement depth * Drainage holes are spaced apart to avoid tissue trauma * The coiled end terminates close to the surface and is equipped with a clip for easy insertion * Soft, flexible, and kink-resistant PVC tubing * Sterile for single use only * Length: 45 cm * Available in sizes: FG 24, 28, 32 * Available with trocar

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Gastric endoscopes (sizes 10-20 Fr)

680

Female

- The tubing is 120cm long and has a reflective surface along its entire length, ensuring sterility. - The end section is open and rounded with four holes on either side. It's not too stiff or too soft, and features markings at 45cm, 55cm, 65cm, and 75cm to allow for precise insertion of the tubing. - The tubing is smooth and free from bumps or cracks. - Packaging specifications: Number 6, 8 boxes/100 pieces; Number 10 >18 boxes/50 pieces

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Long-term storage of silicone stomach probes (numbers 10-20).

50

Female

- Long-term nasogastric tubes are made of 100% silicone – The product has excellent softness and high quality, providing effective results and helping to avoid frequent tube changes, which can cause discomfort for patients.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Foley sonde, 2-way, with sizes ranging from 12 to 24 French units.

2.066

Female

2 sizes: 8Fr and 10Fr with a length greater than 28cm. Sizes 12Fr, 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr, and 26Fr have a length greater than 40cm. Made of soft rubber with appropriate curvature. Silicone-coated surface to reduce reaction, allergies, smooth surface that does not damage or irritate the skin, easy to break, and prevent tearing. Sterilized by ETO gas, packaged individually in smallest units. Available in sizes 8Fr, 10Fr, 12Fr, 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr, and 26Fr; with volumes of 3ml, 3-5ml, and 30ml.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Foley silicone urinary catheters (various types)

50

Female

Intended for use in childbirth – Material: 100% silicone – Features color-coded sizes – Includes a plastic valve – Single-use, sterile – Diameter: 12-26Fr – Ball size: 10-30cc – Length: 400mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Foley 3-way sonde (LATEX FOLEY CAT. 3WAY), sizes (16 - 26) Fr.

170

Female

4-pronged design with a handle. The cord is ≥ 40cm long. Made of rubber with appropriate curvature. Silicone-coated surface to reduce reaction, allergies, smooth and non-abrasive, non-irritating to the skin, unbreakable, and resistant to breakage. Sterilized by ETO gas, packaged individually.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Anal sonde numbers

6

Female

Natural rubber material, packaged in a sterile manner. Catheter sizes: 22, 24, 26, 28. 400mm long tubing made from virgin PVC plastic. Sterilized using ethylene oxide (EO) gas.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Mono J drainage catheters in various sizes, ranging from 30 to 40 cm long.

2

Female

* Direct type: PU drainage tube with a steel core and a pointed trocar tip. Sizes: 8Fr, 10Fr, 12Fr, 14Fr; length 30cm, with locking feature. *Sterilized by EO

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Catheter

28

Female

* Used to assist in the surgical drainage of urine from the kidneys into the bladder. * Size: 6 French * Length: 70 cm * Material: PU (Polyurethane) * Type: Features one connection port

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sonde jj numbers

260

Female

Material: Polyurethane or higher-grade material. Includes: Probe (sonde), insertion tool, and suture for securing the probe. Intended to remain in the body for ≥30 days. Available in sizes: 4.7 ÷ 8Fr. Length: ≥ 15cm. Sterile.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

4. 8mm to 8Fr ureteral stent, length 10-30cm, with HydroPlus coating

12

Female

- Made from Percuflex material with a soft and smooth HydroPlus coating. - Durable material, smooth surface, high durability, and a tapered tip for easy access to the ureter. - Features three marked circles along the stent body, spaced 5cm apart. - The stent is designed with a high ID/OD ratio, optimizing water flow conditions. - Available in sizes of 4.8Fr, 6Fr, 7Fr, and 8Fr. Lengths range from 10 to 30cm (even numbers). - Biocompatible material that remains compatible with the body for up to 365 days.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6, 7, and 8 Fr self-expanding ureteral stents are available, along with guidewires for placement lasting from 6 to 12 months.

24

Female

Smooth and easy to insert, with an open tip, two J-shaped white catheters with length markings, and a reflective coating. The blue insertion guide is available in sizes from 6-8 French. These catheters have a long residence time in the body (6-12 months), provide good drainage, do not cause patient irritation, and feature barcode labeling on the product packaging.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6, 7, and 8 Fr diameter self-expanding ureteral stents are available, with guidewire options for placement lasting from 6 to 12 months.

5

Female

Includes guide wire. Smooth, easy-to-place stent with an open end and two J-shaped white tips with length markings, radiopaque. Blue pusher. Sizes from 6 - 8 Fr. Long-term retention within the body (6-12 months), good drainage, non-irritating to patients, barcode printed on product packaging.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kert-H probes in various sizes (indicated by the letter "T")

5

Female

Made from natural rubber, the connecting part has a larger diameter than other components. Sizes available: 14, 16, 18, 20, 22, 24.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sterile, single-ended (Nelaton) urinary catheters, various sizes.

3

Female

Smooth surface and pointed tip allow for non-invasive insertion to improve patient compliance - Material: medical grade PVC or natural latex - Rubber valve available - Hydrophilic coating available Lateral eyes: - Less trauma to the urethral mucosa - Larger diameter maximizes urine flow and reduces blood clotting Type: - 1-way Fr 06-30, of which: size Fr6 → Fr10 length 300mm; size Fr12 → Fr30 400mm long - Available with Coudé (tiemann) tip: the catheter has a 45° bent tip, allowing easier passage through the enlarged prostate - Suitable for male and female catheterization - Sterilized by EO gas

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight ureteral catheters (numbers)

28

Female

* Material: polyurethane and bismuth/barium, blue color, with clear black markings * Type: open-ended * Sizes: 3FR, 4FR, 5FR, 6FR, 7FR, length 70cm * Luer lock adapter * EO sterilization

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Various Perzer probes

2

Female

Pezzer sonde (also known as a "melon probe"). Made from natural rubber, plastic valves, or rubber. Sizes: 16, 18, 20, 22, 24Fr. Medical-grade rubber material. Products are 100% sterilized.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Pleural drainage tube with trocar included in sizes 8-32 Fr

20

Set

*Pleurostomy trocar set includes a transparent, biocompatible, DEHP-free PVC tube, stainless steel trocar (needle), and markings for depth and trocar position. Sizes available: 8Fr (ID/OD = 2.10/3.00mm, L=20cm), 10Fr (ID/OD = 2.10/3.30mm, L=23cm), 12Fr (ID/OD = 2.60/3.95mm, L=23cm), 16Fr (ID/OD = 3.70/5.30mm, L=23cm), 20Fr (ID/OD = 4.65/6.70mm, L=39cm), 24Fr (ID/OD = 5.40/8.00mm, L=39cm), 28Fr (ID/OD = 6.55/9.20mm, L=39cm), 32Fr (ID/OD= 7.40/10.60mm, L=39cm) * Packaged in EO sterilization.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The closed-loop vacuum system uses a 72-hour cycle with sizes ranging from 6 to 16.

20

Set

* Sterile, two-port suction catheter set, suitable for 72 hours of use. – Medical-grade PVC suction catheter with rounded, soft tip and two suction ports to maximize suction and ensure maximum comfort. Markings on the outside allow for measuring depth control during insertion. The transparent outer plastic layer ensures a safe and easily monitored closed system. – Connection to a clean one-way valve reduces backflow. – A control valve with a connecting piece prevents accidental activation of the suction device. – An automatic cleaning vacuum allows for quick and convenient cleaning without multiple syringe pumps. – Packaging includes: suction catheter, catheter mount (connecting section), 2-in-1 safety capwedge (for covering or removing a temporary ventilator tube or disconnecting an endotracheal tube from the suction catheter) - Sizes available: 6-16FG, length: 30-55cm. Color-coded by size. – Sterile packaging. Free of latex and DEHP.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Set of suction catheters for drawing fluid during closed-loop surgery

20

Female

Used to suction phlegm and mucus from the throat of patients to ensure smooth breathing. It features a bacterial filter at the end of the straw to prevent mucus from entering the user's mouth during use. - Capacity: 25ml - Straw length: 40 & 50 cm - Sizes available: 10, 12, 14Fr

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Guedel Airway (Airway Set)

1.540

Female

Aiway uses nozzles with diameters of 60, 70, 80, and 90 mm (sizes 0, 1, 2, and 3).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Oxygen recovery "T" kit (set of oxygen recovery connectors)

12

Female

The Co T device is designed to deliver oxygen to the patient through either a 15mm endotracheal tube or a laryngeal mask. It includes a 7.6mm port for suctioning without a cap. The kit contains the Co T device with an oxygen port, a 22mm-15cm flexible tubing, and an oxy stem with a cap. Options include a 40% or 60% Venturi valve and a 2mm oxygen tube.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Disposable breathing machine set, with 2 water traps.

150

Set

High-frequency ventilator tubing, corrugated tubing, single-use, for adults, made from medical-grade polyethylene. Length: 160 cm, diameter: 22 mm. – Features two water traps to minimize condensation within the breathing tube. – Y-shaped design with etched grooves to prevent blockage and leakage inside the tubing. – L-shaped connector with air sampling port. Connectors comply with ISO 5356-1 standards. – The product includes an 80 cm corrugated limb and a straight connecting tube. – Sterilization: Ethylene Oxide.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The Y-shaped connectors are available with or without a locking mechanism.

20

Female

* Y-shaped connector with or without a luer lock for connecting external fluid lines. * Transparent polycarbonate material, PVC cap material, HDPE luer lock. * Sizes: 1/4x1/4x1/4; 1/2x3/8x3/8; 3/8x3/8x3/8; 1/4 x 3/16 x 3/16; 3/8x3/8x1/4... * Individually packaged in sterile containers.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight connectors with or without latches in various sizes.

20

Female

* Straight connectors with or without luer lock: for use in external fluid circulation systems. * Transparent polycarbonate tubing, PVC cap, HDPE luer lock. * Sizes: 1/4 x 3/16; 3/16 x 3/16; 1/2x1/2; 3/8x1/4; 3/8x3/8; 1/4x1/4; 1/2x3/8… Packaged individually in sterile containers.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight 1/4 inch male connector or Male-to-Male connector

10

Female

Straight 1/4" male connector, Male x Male, Transparent polycarbonate material, PVC lid, Luer lock with HDPE material.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

A 3-pronged cord lock with a 25 cm (approximately 9.8 inches) cord length.

3.520

Female

- The three-way valve consists of two connection heads with screw-tight lids for opening and closing, and a luer-lock closure. - Includes a 25cm extension cord made from transparent, non-toxic bioplastic, with a flow restrictor. - The three-way port has a smooth bore to ensure smooth fluid flow and a 360-degree rotating angle. - The valve is leak-proof, provides good flow, and has high sensitivity, making it easy to adjust. - Made in Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Three-strand cord lock, 75/100 cm long

50

Female

• Three-way connectors with 10cm, 25cm, and 100cm extension cords. • The lock and connector comply with ISO:80369-7 for safety and secure connection to other devices. • Connector material: PC, HDPE, PP, PVC, ABS • No cracking or leakage during transmission. • Extension cord made of medical-grade PVC, free from DEHP.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kidney dialysis set

29.460

Set

The dialysis set includes: - Arterial line (3880 mm long) and venous line (2830 mm long), - Main line diameter (4.5x6.8) mm, pump tubing (8.0x12x420 mm), effective length 400mm - Small lumen diameter: OD 19-30 mm, length L: 130 mm - Arterial line with pressure measurement branch: 3.5 x 5.5 mm long 500 mm - Y-shaped needle port on the arterial line facilitates easier operation for nurses. - 1 transducer - 2000ml drainage bag - 1500mm infusion tubing - Fill volume: 163±10% mL - Medical grade plastic, free of latex and DEHP. - EO gas sterilization, with sterilization indicator on the packaging (color change: red -> green)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Three-way wireless lock

1.512

Female

- The three-way valve consists of two connection heads with screw-tightening closures and a luer-lock closure. - Does not include connecting tubing. - The three-way connector has a smooth bore to ensure fluid flow and a 360-degree rotating angle. - The valve is airtight, provides good flow, has high sensitivity, and is easy to adjust. - Origin: Vietnam

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

NOVOCENTduo 7Fr Central Venous Catheter (2-lumen)

128

Female

- Size: 7FR/G 16G(P) - 16G (D), 20cm. Guidewire diameter 0.89mm, length 50cm - Seldinger technique. - Material: Soft polyurethane with a special formula. High biological compatibility. - Clear radiopaque markings for precise catheter placement - Y-shaped guide wire with valve - J-shaped guidewire - Three-way locking mechanism to prevent fluid leakage

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

A set of two straight, short-term, 12FR diameter artificial kidney catheters, measuring 15-20 cm in length.

10

Set

- Size 12FR 15-20 cm long - Polyurethane material - J-shaped guide wire with markings 70cm long, made of Nitinol alloy - Y-shaped needle 18G (1.25 mm x 7.0 cm) - 5cc syringe - 2 dilator rods: 10Fr (3.3 mm x 11 cm), 12 Fr (4.0 mm x 14 cm) - Scalpel # 11 - Syringe cap: 2 pieces

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Special Non-Resorbable Sutures Specifically Used for Endoscopic Procedures

484

Female

Used for fixing soft tissues during arthroscopic surgery – Material: Ultra-high molecular weight polyethylene (UHMWPE), stainless steel pins – Dimensions: Width of only 1.40 mm – Colors: White and blue stripes – Tensile strength: 576.12 N/mm²

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Nylon non-absorbable suture numbers

6.350

Package

Only use non-absorbable nylon sutures, monofilament, made of polyamide 6 or polyamide 6.6. Sizes available: 0, 2/0, 3/0, 4/0, 5/0, 0. Suture length: 75cm. The needle is made of 304 stainless steel with a silicone coating. The needle handle features the VerSut design combined with the Microsure suture tip, and a triangular needle head. The bond strength between the needle and suture exceeds USP requirements by more than 200%. The breaking force when tying a knot exceeds USP requirements by more than 120%. EO sterilization.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only non-absorbable silk sutures in various sizes and numbers.

420

Package

This is a natural, multi-strand, non-absorbable suture made from silk cocoon fibers. The sutures are woven using a special method that increases their strength and can remain in place for up to 3 months. They have an average allergy rate. Available with or without needles, single strands measuring 60/75cm - Silk Black

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Nylon DAYLON NUMBER NUMBER 10/0

74

Package

This consists of non-dissolvable nylon sutures, single strands, measuring 75 cm in length, and a triangular needle. They are made from the polymer chains of Nylon 6 and Nylon 6.6. The needles are coated with silicone.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only use non-absorbable polypropylene sutures.

460

Package

Specifically, the product consists of individual polypropylene yarn bundles (sizes 1 to 8/0), with a length of 60-90 cm, stainless steel needles coated with silicone, round needles with a diameter of 40 mm, and 1/2 inch circles.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only use slow-absorbing sutures such as Surgicryl PGA in the specified sizes.

7.724

Package

Self-dissolving Polyglycolic acid suture, multi-stranded, coated with Polycaprolactone and Calcium Stearate, purple color. Suture sizes: 1, 0, 2/0, 3/0, 4/0, 5/0, made of Martensitic 420 (AISI 420) stainless steel. Non-cutting suture, Premium quality, U-filo technology. * Tensile strength: Greater than 200% compared to USP requirements * Knot tensile strength (suture tension): Greater than 120% compared to USP requirements * Suture-to-instrument bond strength: Greater than 300% compared to USP requirements * Tensile strength: Approximately 63% of original strength after implantation, maintained for 21 days. Completely dissolved after 90 days. EO sterilization

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only use slow-absorbing Polyglactin sutures (Surgicryl 910) for the following applications:

60

Package

Only self-dissolving, multi-strand Polyglactin 910 suture, coated with Polyglactin 370 and Calcium Stearate, purple color. Suture sizes available: 0, 1, 2/0, 3/0, 4/0, 5/0. Made of Martensitic 420 (AISI 420) stainless steel. Non-cutting needles, Premium needles, U-filo technology. The bond strength between the needle and suture is greater than 200% compared to USP requirements. Tensile strength when tying a knot is greater than 120% compared to USP requirements. Tensile strength: Approximately 57% of original strength after 21 days of implantation. Completely dissolves within 50-70 days. EO sterilization.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only slow-healing sutures using chromic gut are available with needles of various sizes.

1.224

Package

Includes: Slow-dissolving, natural chromic catgut sutures in sizes 0; 1; 2/0; 3/0; 4/0, and round needles (size 1/2C) with suture loops ranging from 20mm to 40mm. Packaged in 100% HDPE fiber Tyvek paper for durability, tear resistance, and effective bacterial protection. The sutures are made of pure collagen.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Vicryl thread, size 2/0 - 4/0

120

Package

Only the composite Polyglactin 910, coated with 50% Polyglactin 370 and 50% Calcium Stearate No. 4/0 long strands of 75cm, round SH-2 Plus Ethalloy needles with improved silicone coating, 20mm diameter, half-circle shape. The holding force for the wound remains at 75% after 14 days, 50% after 21 days, and 25% after 28 days. Complete self-dissolution time: 56 - 70 days.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Vicryl thread sizes 5/0 – 6/0

120

Package

Only the composite Polyglactin 910 dressing, consisting of 50% Polyglactin 370 and 50% Calcium Stearate No. 5/0 long strands (75cm), RB-1 Plus round tip stainless steel needles with improved silicone coating, and 1/2 circle length of 17mm, provides wound closure. The dressing maintains a 75% closure rate after 14 days, 50% after 21 days, and 25% after 28 days. Complete tissue regeneration takes 56-70 days.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Only rapid suture types and sizes (Surgicry Rapid)

120

Package

The fast-dissolving, multi-fiber Polyglactin 910 dressing is coated with 50% Polyglactin 370 and 50% Calcium Stearate No. 4/0 long strips of 75cm in length, with triangular-shaped FS-3 Ethalloy steel needles, coated with improved silicone, measuring 16mm in diameter (3/8 inch). The dressing provides a secure hold for the wound: 50% after 5 days, and 0% after 10-14 days. Complete dissolution takes 42 days.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Various grades of soft steel

5.150

Roll

Diameter: 0.4/0.5/0.6/0.7/0.8/0.9 mm, length 10 m. Meets ASTM-F543 standard. Material: Stainless steel (C: 0.03; Si: 0.37; Mn: 2.0; P: 0.045; S: 0.03; Ni: 14.27; Cr: 17.52; Fe: 62.8)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical Stainless Steel for Dentistry, Oral Surgery, and Maxillofacial Surgery

10

Roll

Diameter from 0.4mm to 0.9mm – length of 10m per roll; – made of stainless steel, meeting ASTM F138 standards (62.8% Fe; 17.52% Cr; 14.27% Ni)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical blades

1.780

Female

The surgical instruments are made of stainless steel and carbon steel. Sizes: 10, 11, 15, 20, 21.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sites saw cord

8

Female

Material: stainless steel. Lengths available: 32 cm, 40 cm, or 50 cm. Uses: for bone cutting and neurosurgical procedures.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Disposable single-use electrode cutter

352

Female

1. The cauterizing wire must be ≥ 3.0 meters long. 2. The connector connecting to the cauterizer must be a standard 3-pin type. 3. The body has two "Cut-Coag" buttons with distinct colors for activating cutting and hemostasis; 4. Blades are made of stainless steel (SUS304 or higher), with non-stick coating on the tip. Fixed length of 70mm using a hexagonal key, blade diameter of 2.36mm. Length: 190+-2mm 5. Compatible with cauterizers currently used in hospitals (Valley Lab, Conmed, Martin, ERBE, Tekno, ...). 6. The product is packaged in two layers and sterilized using EO gas.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Dao THUNDERBEAT, 9 cm, type Open Fine Jaw, for open surgery

6

Female

- Specialized surgical instrument for open surgery – Combines two energy sources on a single instrument: ultrasound and bipolar – Capable of cauterizing blood vessels with a diameter ≥ 7 mm" – Working length: ≥ 90 mm" – Operates at a frequency of ≥ 47 kHz" – Modes of operation: combines cauterization and cutting with cauterization. – The instrument body has a button to select the operating mode.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Dao thunderbeat, 5mm blade length, 35cm overall length, front-handled, Type S

2

Female

- Specialized surgical instrument for endoscopy – Combines two energy types on a single instrument: ultrasound and bipolar – Capable of cauterizing blood vessels with ≥ 7 mm diameter. - Working length: ≥ 350 mm - Outer diameter: ≤ 5.5 mm - Uses operating frequency: ≥ 47 kHz - Operating modes: Combination of cautery and cutting, with combined cautery. - The instrument has a button to select the operating mode. - Three adjustable levels of combined ultrasound and bipolar energy are available.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Dao THUNDERBEAT, 5mm blade length, 20cm overall length, front-handled, Surgical Type S, for surgical use.

2

Female

- Specialized surgical instrument for minimally invasive surgery and open surgery – Combines two energy sources on a single instrument: ultrasound and bipolar – Capable of cauterizing blood vessels with a diameter ≥ 7 mm" - Working length: ≥ 200 mm" - Outer diameter: ≤ 5.5 mm" - Uses operating frequency: ≥ 47 kHz" - Operating modes: combines cauterization and cutting with cauterization" - The instrument body has a button to select the operating mode" - Offers 3 adjustable levels of combined ultrasound and bipolar energy

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

SONICBEAT ultrasonic probe, 5mm diameter, 20cm long, with a front-mounted handle.

5

Female

- Uses ultrasonic energy – Capable of cauterizing blood vessels with a diameter up to 5 mm – Provides even pressure when clamping tissue – Reduces the formation of steam during surgery – Minimizes heat transfer to surrounding tissues – Working length: 200 mm – Outer diameter: 5.5 mm – Operates at a frequency of 47 kHz – Features maximum and variable ultrasonic power modes – Includes buttons on the handle for selecting operating modes – Offers 3 adjustable ultrasonic power levels

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

SONICBEAT ultrasonic probe, 5mm diameter, 35cm long, with a front-mounted handle.

5

Female

- Uses ultrasonic energy "- Ability to cauterize blood vessels with a diameter of: 5 mm" - Applies even pressure when clamping tissue - Reduces the formation of steam during surgery - Minimizes heat transfer to surrounding tissues - Working length: 350 mm" - Outer diameter: 5.5 mm" - Operates at a frequency of: 47 kHz" - Operating modes: maximum ultrasonic power and variable ultrasonic power. - The handle has a button to select the operating mode - There are 3 adjustable ultrasonic power levels

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Knife cutting pepper

6

Box

- Suitable for both standard and cold cutting machines, compatible with machines from various brands. - Dimensions: 80 x 8 x 0.25mm; - Cutting angle: 34~35°. - High hardness, durable, and rust-resistant. - Can cut most types of blades. - Blade surface is coated with Chromium and PTFE (Teflon).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The electric knife cuts under the mucosa, the electrode tip is disc-shaped

4

Female

The instrument is used for endoscopic submucosal dissection (ESD), a minimally invasive surgical technique performed on the esophagus and colon. It features a disc-shaped electrode tip. The endoscope system includes a handle, a sheath, an electrode-attached blade, and an insulated tip, suitable for channels with a diameter of ≥2.8mm. The length of the sheath is ≥165cm to ≤230cm. The blade has a length ≤ 3.5mm, and the insulated tip has a diameter ≤ 1.7mm. Sterile. - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electric knife cuts submucosa and cuts esophageal sphincter, triangular knife tip 0.4mm

4

Female

The instrument features a triangular-shaped blade for endoscopic submucosal dissection (ESD) and esophageal sphincterotomy (POEM), with a lavage channel. The endoscope system includes one handle, a sheath, the blade, and a water pump to deliver irrigation fluid during surgery, suitable for channels ≥ 2.8mm in diameter. The length of the sheath is ≥ 165cm. The triangular-shaped blade, with an electrical conductive tip, allows cutting in any direction without rotating the handle. The blade measures 4mm ± 0.5mm, and the diameter of the triangular tip is ≤ 0.4mm. Sterile. - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cut knives cut under the mucosa of the hook type, with irrigation channel.

4

Female

This includes: a biopsy forceps, a resection knife with a "L" shape blade that can be rotated, a channel for irrigation, and is used for the stomach and intestines. It also requires endoscopes with a channel diameter of ≥ 2.8mm, a blade length of ≥ 4.5mm, a hook length of ≤ 1.3mm, and a working length of ≥ 1650mm to ≤ 2300 mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cut knife under the mucosa shaped

2

Female

The endoscope used for endoscopic submucosal dissection (ESD) features a spoon-shaped blade that can be extended or retracted, and includes a channel for irrigation fluid. The endoscope system consists of a handle, a sheath, the blade, and a water pump to deliver irrigation fluid during surgery. It is suitable for channels with a diameter of ≥ 2.8mm. The length of the sheath is available in at least three sizes, ranging from ≥ 165cm to ≤ 230cm, with a minimum spacing of 30cm between each size for selection. The blade has a length of ≥ 1.5 mm to ≤ 2.0 mm. Sterilized.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cutting knives under the insulating head mucosa

3

Female

Disposable enema scissors with an insulated tip, insulated outer casing, triangular electrodes, and a housing designed for optimal control, a 2.8mm working channel, a 1650mm working length, a 4mm blade length, a 2.2mm insulated tip diameter, compatible with endoscopes – Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electrocautery hemostasis forceps for use in endoscopic procedures of the esophagus and stomach.

3

Female

Disposable electric hemostasis clamp. Provides precise and reliable ESD-safe clamping techniques. Non-slip structure to securely grip bleeding points, rotating function, working length of 1.650mm, compatible with endoscopes with a channel diameter ≥ 2.8mm, bite width of 6.5mm. - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electrocautery forceps.

3

Female

Disposable electric hemostasis clamp. Provides precise and reliable ESD-safe clamping techniques. Non-slip structure to securely grip bleeding points, rotating function, working length of 2.300 mm, compatible with endoscopes with a channel diameter ≥ 3.2mm, bite width of 4mm. - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hematopsiia clamps peeled under the mucosa and burns gastrointestinal hemostasis

3

Female

Hemostatic forceps for dissection beneath the mucosa and hemostasis in the digestive tract during ESD (endoscopic submucosal dissection) surgery. Rotatable design. Working length of 1650 mm, compatible with instrument channel diameter ≥ 2.8mm, bite width of 5mm. Sterile. - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

High frequency wave burning needle

10

Female

- High-frequency electrode device for tumor treatment, compatible with the CoATherm AK-F200 machine. - Electrode and signal cable set, including a water-cooled electrode tip. - Electrode tip diameter: 20/18/17/15G; - Tip handle length: 70/90/100/150/200/350/400/500mm - Heating element length: 3/5/7/10/20/30/40/50mm * Includes a compatible high-frequency generator for use.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Skin graft knife blades

5

Female

The BA718R blade is designed to be used with the BA712R, BA717R, and BA719R.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft, single-piece artificial lens with good intermediate vision.

180

Female

1. Soft contact lens, single vision, extended focal length, transparent, one piece, aspheric, C-shaped. 2. Enhances intermediate vision. 3. Acrylic material, non-water absorbent, UV filter. 4. Three fixed points or equivalent design. 5. Lens diameter 6mm, total length 13mm. 6. Cantilever angle: 0 degrees. Diopter range: +5D to +34D (step of 0.5D). 7. Refractive index ≤ 1.47, spherical aberration ≤ -0.27µm. 8. Used with a pre-assembled rotating injector. Surgical incision size: 2.2mm-2.4mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single artificial lens, one piece, water-repellent, pre-installed.

10

Female

1. Soft, single-focal length, one-piece artificial lens, non-tinted color. 2. Material: Hydrophobic Acrylic (Acrylic that does not absorb water). 3. Frame design: Two C or L-shaped frames. 4. Optical design: Aspheric lens, spherical equivalent -0.20 µm ≥ SA ≥ -0.25 µm. 5. Lens diameter: Approximately 6.0 mm to 6.5 mm. 6. Overall length: Approximately 11.5 mm to 12.5 mm. 7. Refractive index: RI ≥ 1.55. 8. Minimum power range: From -10.0D to +45.0D. 9. Fitting device: The lens is pre-fitted in a fitting device, suitable for incisions ≤ 2.2 mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-piece synthetic crystal, colorless

18

Female

- Soft, single-piece, monofocal artificial lens, colorless. - Optical material: Acrylic, Hydrophobic – water-repellent, <0.5% water content. - Does not yellow or block UV light. - Refractive index: 1.49

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Monofocal, yellow, Z-shaped artificial lens

10

Female

- Single-piece, soft, artificial lens, Z-shaped, yellow color, filters blue light and UV rays. - Material: Hydrophobic Acrylic, optic diameter ≥ 5.8mm, total diameter ≥ 12.8mm. 360° bevel edge - Lens angle: 0°, angle between the lens and the frame ≥ 90°. - Distance between the two lens arms: ≥ 9.5mm, base of the lens: ≥ 0.6mm. - Power range from 1.0D to 30.0D, A value ≥ 119.0 - Front surface depth ≥ 5.7, refractive index ≥ 1.52 - Cut diameter ≤ 2.2mm - Lens is pre-installed in a single-use injector cartridge.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Pre-installed, single-piece, soft artificial crystal lens, transparent

14

Female

- Soft, single-focal lens made of hydrophobic acrylic, with a non-spherical design. The outer surface is coated with a layer of heparin for UV protection and clarity. Single-piece C-shaped design. - Lens diameter ≥ 6mm, total diameter ≥ 13mm. - Inserted through small incisions ≥ 2.2-2.6mm in increments of Diopters. - Diopter range from 0D to +34D with a step of 0.5D. - A-constant ≤ 120.2 - ACD ≥ 6.14, packaged in a case. - PCO blocking design: square edge and 360° anti-fog ring on the back. - Refractive index ≥ 1.49 - Abbe number ≥ 50 - The lens is fully inserted into the injector.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-focal length, soft, artificial crystal lens design with four supports.

300

Female

- Single-piece, hydrophobic acrylic lens material. - TTT (yellow light filter) filters blue and UV light. - 4-prong design. - Total lens length: from 10.50mm to 11.50mm. - Optical diameter: from 5.75mm to 6.50mm. - Refractive index: 1.50 to 1.53. - Front curve depth: ≥ 5.5. - Abbe number: from 40 to 50. - Lenses are pre-installed or supplied with a lens holder. - Power range: from 0D to 30D in increments of 0.5D-1D.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single artificial crystal, one piece, water-filled, with 4 legs

20

Female

1. Soft, single-focal length artificial lens, one piece. 2. Material: Acrylic Hydrophilic (26% water absorption) 3. Four-pronged design, with a minimum angle of ≥ 5° for each prong. 4. Spherical lens design, with a spherical equivalent deviation: -0.15 µm ≥ SA ≥ -0.17 µm 5. Optical diameter ≥ 6.0 mm, total length ≥ 11.0 mm 6. Refractive index: RI ≥ 1.46 7. Minimum power range: from -10.0D to +40.0D 8. Setting device: The lens comes with a setting device, suitable for incisions ≤ 2.2 mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single artificial crystal, one piece, water-filled, with 4 legs, pre-assembled, yellow color.

60

Female

1. Soft, single-piece, monofocal artificial lens, yellow color. 2. Material: 25% hydrophilic acrylic. 3. Features: UV and blue light filtering. 4. Frame design: 4 points, frame angle ≥ 5°. 5. Optical design: Aspheric; Refractive index -0.17µm ≤ nSaf ≤ -0.15µm; Abbe number ≤ 50.0. 6. Lens diameter: approximately 6.0mm to 6.5mm. 7. Overall length: approximately 11.0mm to 12.0mm. 8. Minimum power range: from -20.0D to +50.0D. 9. Included accessory: The lens is pre-installed in the frame.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft, monofocal, aspherical, non-hydrated, 2-lens, UV and blue light filtering, pre-installed artificial lens

26

Female

- Soft, single-focal length artificial lens, 1 piece, designed for optical use – Optical material: Hydrophobic Acrylic – Gold coating, UV filter (UV); blue light filter – Refractive index: ≥1.548 – Lens features: 2 lens; Improved C-shaped lens – Lens diameter: 13mm, optical zone diameter: 6.0mm – Power range: from +6.0 D to +30.0 D – Incision size: ≤ 2.2mm – Lens pre-inserted into a rotating injector (injector). – Optical design: Square edge for anti-reflection coating. The optical material does not cause "glistening" effect. – Constant A ≥ 118.9; – The spherical equivalent (SA) of the lens is: -0.16µm; (-0.15 µm ± 10%)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-piece artificial crystal, soft, 3 pieces, water-repellent.

10

Female

1. Material: Water-repellent, soft acrylic. 2. Design: 3-piece, standard design with a bridge. 3. Filtration capability: UV filtration. 4. Power range: -10.0D to +30D. 5. Corneal diameter: Fits corneal diameters ≤ 2.8mm. 6. Eyeglass case: Not included, comes with an eyeglass case.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-piece, artificial crystal lens, water-repellent, pre-installed.

10

Female

1. Soft, single-piece, acrylic lens. 2. Material: Non-water-absorbing acrylic. 3. Refractive index: >= 1.47, <= 1.49. ACD: 5.7 mm 4. Design: Aspheric, C-shaped or equivalent. 5. Lens length: 13mm. Optical center diameter: 6.0 mm. 6. Power range: From +6.0D to +30.0D (in increments of 0.5D). 7. Lens pre-installed in a rotating injector (injector type).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Standard, long-lasting artificial silicone lens, 4 prongs

50

Female

- Artificial crystal with extended focal length, utilizing polynomial lens extension technology. - Hydrophobic Acrylic material. - Total crystal length: from 10.50mm to 11.50mm. - Optical diameter: from 5.75mm to 6.0mm. - 4-prong design. - Filters blue light and UV rays (yellow tint). - Refractive index: ≥ 1.5. - Abbe number: ≤ 50. - Includes insertion tool. - Power range: from 10D to 30D in increments of 0.5D. - Front chamber depth ≥ 5.5mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft, single-focus, extendable lens made of glass.

30

Female

- Soft, single-lens contact lens with extended focus, non-water-absorbing, UV protection, and purple light filtering. - Material: Hydrophilic Acrylic; Optical diameter ≥ 6.0mm, total diameter ≥ 13.0mm. - C-shaped frame design; Frame angle ≥ 5 degrees. - Power range from +5.0 to ≥ +34.0D (from +5.0 to +30.0D, increasing in increments of 0.5D; from +30.0 to +34.0D, increasing in increments of 1.0D). - Constant A ≤ 119.0: Refractive index ≥ 1.48. - Incision size ≤ 2.2mm. - The lens is pre-inserted into the contact lens case.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft, three-piece artificial crystal lens, spherical, single piece, water-repellent, pre-assembled.

20

Female

- Soft, artificial lens, three pieces, water-repellent – Principle: refraction – Optical surface design: aspheric – Lens features: two C-shaped edges, 360-degree smooth edge, 0-degree angle – Refractive and scattering surfaces are designed on the front of the optical element, neutral spherical aberration – Near vision power +3.33D, intermediate vision power +1.66D. – Total diameter ≥ 13mm, optical diameter ≥ 6mm – Cut size can be ≤ 2.6 mm – Value A ≥ 119.3 – Refractive index: ≤ 1.49, Abbe number ≥ 51, ACD ≥ 5.7 mm – Power range from ≤ +5 to ≥ +34D – Fully assembled

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Multi-focal lens

20

Female

1. Soft focus, multi-focal lens, type 1, clear, non-spherical, C-shaped. 2. Support power: +4D, +3.25D; +2.75D 3. Water-free acrylic material, UV filter. 4. Lens diameter ≤ 6mm, total length ≥ 13mm 5. Frame angle: 0 degrees. Back edge is 360 degrees smooth and anti-glare treated. 6. Diopter range: +5D to +34D 7. Abbe number >58 8. Refractive index ≤ 1.47 9. Curvature error ≤ -0.27µm 10. Used with rotating injector.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft, single-piece, three-focal length artificial lens for correcting nearsightedness.

20

Female

- Soft, three-focal length artificial lens, single piece, aspheric, for astigmatism correction. – Optical material: Hydrophobic Acrylic – Gold-colored, UV (ultraviolet) filtering; blue light filtering. – Visual design: Near vision: 35cm, intermediate vision: 65cm. – The optics are designed with a double convex shape, with a square edge on the optical rim, creating a textured and thin surface to prevent secondary haze formation. Front: Aspheric design combined with refraction/diffraction. – Refractive index: 1.548 – Frame type: 2 frames – Lens length: 13mm, optical zone diameter: 6.0mm – Power range: +10.0 D to +30.0 D. – Additional power: for near vision +3.5D and intermediate vision +1.75D. – Incision size: 2.2mm. – The lens is pre-inserted into a rotating/pushing (Multisert) injector gun, making the insertion process convenient and safe. – Improved C-shaped frame, with a 0° frame angle. – The optical center's spherical equivalent (SE) is: -0.16µm; (-0.15 µm ± 10%)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft artificial crystal lens (3 pieces)

20

Female

- Three-focal length artificial crystal, based on the principle of refraction. - Hydrophobic Acrylic material. - Filters UV and blue light in yellow. - Features four support legs. - Crystal length: from 10.5mm to 11.5mm. - Optical diameter: from 6.0mm to 6.5mm. - Refractive index: from 1.45 to 1.55. - Front chamber depth: from 5.3 to 5.9mm. - Abbe number: from 40 to 50. - Power range: from +10D to +35D in increments of 0.5D. - Additional power ranges: +1.5D to 1.75D and +3D to +3.5D. - Includes a set for placing the lens.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The total knee balance has cement

30

Set

1. The ball pivots within the socket like a natural knee joint, with a stable angle range of 0-90 degrees. – Available in 8 sizes for the femur: 1; 2; 3; 4; 5; 6; 7; 8 – Top surface width (A/P): 59, 61, 64, 66, 70, 73, 77, 80mm – Top surface length (M/L): 51, 54, 57, 60, 64, 68, 72, 76 mm 2. The shin plate: The right plate is for the right leg and the left plate is for the left leg. – Available in 11 sizes: 1, 2, 2+, 3, 4, 5, 6, 6+, 7, 8, 8+ – Top surface width (A/P): 40, 43, 46, 49, 52, 55, 58, 61, 64mm – Top surface length (M/L): 54, 58, 62, 66, 70, 74, 78, 82, 86mm – Stem Length: 31; 34; 38; 41mm 3. The cushion: Made of UHMWPE material with 6 different thicknesses: 10; 12; 14; 17; 20; 24mm. 4. The wheel: Made of UHMWPE, 3 wheels. Available in terms of thickness and diameter: 26 x 8,0 mm; 29 x 8,0mm; 32 x 8,0 mm; 35 x 8,0 mm; 38 x 10 mm; 41 x 11,0 mm. 5. The cement: Cement consists of: One 14.4g and 16.4g sterile liquid monomer tube and one 40g polymer powder pack * Standard cement: ISO 13485, EU and FSC – Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full-length cement knee brace with Vitamin E padding

20

Set

The BALAN SEE knee implant (0-95º arc) limits bone resection on both the anterior and posterior aspects, while simultaneously restoring patellar stability and maximizing range of motion up to 150° – The patellofemoral design preserves bone stock, with a robust multi-directional tibial fixation mechanism. 1. Femoral Component: * Material: CoCr alloy * Available in left/right femoral components with 15 sizes, 10 standard designs, and 5 extended designs for sizes 3N, 4N, 5N, 6N, and 7N. 2. Tibial Plate: * Material: Ti-6Al-4V * Available in 9 sizes with dimensions: Width: 58, 61, 64, 67, 70, 74, 77, 80, and 85mm. Depth (anterior/posterior): 38, 40, 42, 44, 46, 49, 52, 55, and 59mm 3. Tibial Bearing: * Design: PS material with highly crosslinked Vitamin E, available in sizes from 9-25mm with 8 different thicknesses. 4. Patellar Component: * Material: UHMWPE with Vitamin E, available in 6 sizes: size 27 (7.5mm thickness); size 29 (7.5mm thickness); size 32 (8.5mm thickness); size 35 (9mm thickness); size 38 (9.5mm thickness); and size 41mm (10mm thickness) 5. Cement: * The cement is packaged with a 14.4g and 16.4g sterile liquid monomer, and a 40g polymer powder. * Standard cement: ISO 13485, EU – Provides compatible and synchronized support.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full knee joint with cement, Vitamin E

20

Set

1. Femoral Component: - Material: Cobalt Chromium Molybdenum alloy - ISO5832/4. - Surface Coating: CrCo and TiNbN coating - ISO7207-2. - Sizes: 10 sizes from 4-13, distinguishing left and right sides. 2. Tibial Component (Top): - Material: Titanium Aluminium Vanadium alloy - ISO5832/3. - Sizes: 10 sizes of the tibial component combined with colored liner pads (XS-A/pink, B-C/green, D-E/red, F-G/blue, H-I/orange). 3. Liner: - Material: High molecular weight UHMWPE combined with Vitamin E. - Thickness: 9 thicknesses (9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 20mm) suitable for each size of the tibial component. - Preserves posterior ligaments. 4. Patella: - Material: High molecular weight UHMWPE without Calcium Stearate - ISO5834/1/2. - Sizes: 6 sizes (28mm-38mm, with an increase of 2mm per step) - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The fully adjustable orthopedic pillow features a fixed concrete support and a 155-degree knee angle.

10

Set

1. Femoral component: CoCrMo alloy material with SpheroGrip or equivalent coating, available in a minimum of 8 sizes, clearly distinguishable between left and right. With diameters ranging from 52 to 72mm and inner/outer diameters ranging from 55 to 76mm. 2. Tray component: Fixed type made from CoCrMo alloy, with SpheroGrip or equivalent coating. Available in a minimum of 5 sizes corresponding to left and right, with diameters ranging from 42 to 56mm and inner/outer diameters ranging from 65 to 85mm. 3. Tray cushioning material: High-molecular-weight polyethylene or equivalent material, available in 7 left and right sizes, with a minimum of 5 thicknesses ranging from 10mm to 18mm. Includes locking mechanisms for added anti-slip support. 4. Cement and mixing solution: Provides compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Selling shoulder joint with cement

3

Set

1. Cemented Stems (Ti6Al4V): Length: 80 mm – Material: Ti6Al4V with L ≥ 80 mm – Individually sterilized and packaged, 1 piece/box. 2. Humeral Bodies with Locking Screw: – Material: Ti6AI4V alloy with locking screw – Individually sterilized and packaged, 1 piece/box. Size: medium. 3. Heads: – Constructed from CoCrMo alloy with a titanium-based locking mechanism (0°, +2°, +4°, +8°) with diameters ranging from 38–54mm with a step of ≥ 2mm. – Individually sterilized and packaged, 1 piece/box. 4. Gentamicin-impregnated Cement: – Supplied with compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full shoulder joint does not cement

3

Set

Used in cases of osteoarthritis, complex fractures, and revision surgeries, etc. 1. Cementless Finned Stems: - Material: Ti6Al4V with L60, L80 mm, diameter 11 -> 18mm increments of 1mm. - Packaged individually in sterile containers, 1 piece/box. 2. Humeral Bodies with Locking Screw: - Material: Ti6AI4V alloy along with locking screws. - Packaged individually in sterile containers, 1 piece/box. 3. Liner: - Structure: Ti6Al4V + PoroTi HA coating, the inner part is made of two materials: CoCrMo and Ti6Al4V. The liner (Liners): High molecular weight polyethylene (UHMWPE) / stainless steel (X -Lima) with standard dimensions 36mm (0,+3, +6). - Packaged individually in sterile containers, 1 piece/box. 4. Bone Screw: Material: Titanium (Ti6AI4V), diameter 6.5mm, length 20-40mm - Compatible accessories are provided.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cemented partial hip joint

10

Set

Bipolar: - Material: CoCr - The inner part of the bipolar is made from polyethylene material - Optimized biocompatibility - Features a locking mechanism - Diameter from 44mm to 60mm (increment of 2mm) Head - Material: CoCr - 12/14 Taper - Implant has a super-smooth surface - Diameter: 28mm (-3; +0; +4; +8; +12); 32mm (-3; +0; +4; +8; +12); 36mm (-3; +0; +4; +8) Handle: - Titanium material with 8 sizes from Size 3 to size 10 - The handle range allows for implantation suitable for all bone sizes - The handle range, which is cemented, includes 11 standard femoral handles with a 135° angle - The handle range, which is cemented, includes 10 lateral femoral handles with a 126° angle - 12/14 taper, completely conical - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The hip joint includes a cement-filled component, and the ball-and-socket mechanism has a locking system to prevent dislocation.

16

Set

1. Handle: Cemented handle: 135-degree angle. Stainless steel material. Handle dimensions: 12/14, 5 degrees, 40 minutes, elliptical shape, and polished to a mirror finish. Sizes available: 9, 10, 11, 12, 13, 14, 15, 16. Pre-sterilized via gamma irradiation. 2. Mortar Cup: Outer surface made of stainless steel, polished to a mirror finish. Inner surface made of polyethylene. Dimensions: 42-58 steps with a corresponding diameter of 22.2mm; 42-60 steps with a corresponding diameter of 28mm. The mortar cup has a locking mechanism to prevent misalignment. 3. Tailbone (Dome): Material: Stainless steel. Sizes available: 12/14, 22.2mm diameter: sizes available: 0; +3; 12/14, 28mm diameter: sizes available: -3.5; 0; +3.5; +7. 4. Stop Button. 5. Cement. - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hip joint with a non-cemented head and a UHMWPE cushion that connects in a cross pattern.

20

Set

1. Femoral Condyle: - Material: Titanium alloy with a Hydroxyapatite (HA) coating on the entire handle - Available in 11 sizes ranging from 123mm to 163mm - Handle neck angle of 135°, Neck taper of 12/14 2. Femoral Head: - Material: Cobalt Chrome - Sizes: 22mm or 28mm. 3. Femoral Neck: - Material: Outer stainless steel, inner high-density cross-linked polyethylene - Sizes: 40mm to 60mm (Increase by 1mm per size) - Compatible accessories are provided.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Plasma seamless neck cementless partial hip arthroplasty

20

Set

1. **Pole:** Cobalt Chrome material with a cross-linked polyethylene outer surface (A-CLASS), diameter ranging from 36mm to 65mm, increasing by 1mm per size. Range of motion: 100° - Cross-linked polyethylene lining, featuring an internal UHMWPE support ring fixed within the housing and an upper UHMWPE locking ring attached to the support ring. 2. **Femoral Head:** Cobalt Chrome material, diameters of 22.25mm, 28mm, 32mm, 36mm. Adjustable (+0mm, ±3.5mm, +7mm). 3. **Femoral Neck:** Titanium alloy material, classic neck angle is 135 degrees with stem offset: Short neck (35-42mm), medium neck (37-44mm), long neck (42-49mm). Classic Varus neck angle of 8° is 127 degrees with stem offset: Short neck (38-45mm), medium neck (43-50mm), long neck (46-53mm). Handle body coated with plasma (0.5mm). Sizes: 1-10, length: 125, 135, 140, 145, 150, 155, 160, 165, 170, 175mm. M/L with 27-36mm; A/P Thick 12-19mm. 12/14 degree conicity - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The hip joint is made of non-cemented material, with a 130-degree angle at the neck of the stem, and is coated with calcium phosphate (CaP) HX.

10

Set

01. Femoral Canal Guide (Ti6Al4V): The outer section is coated with a layer of HX® (calcium phosphate-based coating, 15µm thick), while the inner section is made of Ti6Al4V alloy. The handle has a straight design with longitudinal and transverse grooves for stability and to prevent rotation; it also features square edges and rectangular/trapezoidal cross-sections for secure fixation, preserving bone tissue in the femoral neck region, and has a tapered end: 12/14 mm. It is available in sizes of 8/115mm, 9/130mm, 10/140mm, 11/145mm, 12/150mm, 13/155mm, 14/160mm, 15/165mm, 16/170mm, 18/180mm, and 20/190mm. 02. Femoral Head (CoCrMo): Available in diameters of 22 (-3.5,0); 24 (-3.5,0) mm with a 40 - 42 mm bipolar cup; and 28 (-3.5,0,+3.5) mm with a 44 - 64 mm bipolar cup. 03. VarioCup (CoCrMo): The inner section is made of high-density polyethylene (UHMWPE), and the safety ring is also made of UHMWPE. It comes in 13 sizes, ranging from 40 to 64mm, providing compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Long shank Z cementless partial hip joint set with removable neck

14

Set

1. **Femoral Head:** Cobalt Chrome material with A-CLASS cross-linked polyethylene outer surface, diameter from 36mm to 65mm, increasing by 1mm per size. Range of motion: 100° - Cross-linked polyethylene lining, featuring an internal UHMWPE support ring fixed within the shell and a top UHMWPE locking ring assembled above the support ring. 2. **Femoral Shaft:** Made from Cobalt Chrome with diameters of 22.25mm, 28mm, 32mm, 36mm. Adjustable core (+0mm, ±3.5mm, +7mm). 3. **Neck:** Material: Titanium and Cobalt Chrome. Varus neck angle: 127 degrees, Neutral neck angle: 135 degrees, Valgus neck angle: 143 degrees, Neck length: 27mm–38.5mm. 4. **Femoral Shaft (Titanium):** The classic 8° Varus neck angle is 127 degrees with the stem offset (Offset): Short stem (34- 43mm), Long stem (43 - 51mm). The classic straight neck angle is 135 degrees with the stem offset (Offset): Short stem (31- 40mm), Long stem (39 - 47mm). Length: 176mm, 181mm, 186mm, 191mm, 196mm, 201mm, 206mm, 211mm, 216mm - Compatible with corresponding accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hip joint made of a non-cemented titanium and HA (hydroxyapatite) composite material with double-layer coating.

30

Set

1. Non-cemented femoral head: – TA6V ELI titanium alloy material, with two layers of porous titanium coating to promote bone ingrowth and HA (hydroxyl apatite) coating to facilitate both internal and external bone growth. – Available in two types: with and without recessed surfaces on the handle, with longitudinal and transverse grooves on the handle body. – Handle angle is 135 degrees, with a taper of 12/14. The corresponding sizes and lengths are: 9x130mm, 10x140mm, 11x145mm, 12x150mm, 13x155mm, 14x160mm, 15x165mm, 16x170mm, 18x180mm, and 20x190mm. – Corresponding handle offsets: 9x41.5mm; 10x42.3mm; 11x43.1mm; 12x43.9mm; 13x44.8mm; 14x45.6mm; 15x46.4mm; 16x47.2mm; 18x48mm; and 20x48.9mm. 2. Partial femoral head (Head shell + Head liner): – Head shell material: stainless steel, diameter from 38 to 62 mm, with a step of 1mm. – Head liner: Polyethylene or UHMWPE material. 3. Femoral head has two types: – Stainless steel (ISO 5832-9) – Diameter approximately 22.22 mm: used with head shells with diameters of approximately 38, 39, and 40 mm; length: -4; +0; +4 mm. – Diameter approximately 28 mm: used with head shells with diameters from 41 to 62 mm; head size: -3.5; 0; +3.5; +7 mm. – Compatible accessories are provided.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The hip joint sells the cement corner of the neck corner 125 °

14

Set

1. Femoral Head: - Material: Cobalt-chrome head (CoCrMo-ISO 5832-12), compatible with 12/14 degree 5°40' taper stems. - Size: Head diameter (corresponding offset): Ø 22.2 (+0, -2, +4); Ø 28 (+0, ±3.5, +7); Ø 32 (+0, ±4, +8); Ø 36 (+0, ±4, +8) mm 2. Non-Cemented Femoral Stem with Offset: - Material: Titanium alloy (Ti6Al4V-ISO 5832-3), 225 +/- 25 µm thick, coated with 120 +/- 35 µm hydroxyapatite. - Size: 9-18 mm in length, compatible with 12/14 degree 5°40' taper stems. - Stem angle: 125°. - Features a self-locking, square design for stable stem positioning and a gradually expanding shape to securely fix the femoral canal. - Provides compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The hip joint implant is available with a non-cemented technology using Plasmapore coating.

12

Set

1. Femoral Stem: Material: Titanium; Stem size: 8-18mm with 1mm increments; The top of the implant is coated with a 0.35mm layer of pure titanium using plasmapore technology, directly bonding the bone to the top of the implant. 2. Acetabular Cup: - Material: Cobalt-chromium - Size: 12/14; Diameter: 22.2mm; 28mm 3. Dual-Channel Liner: - Material: Metal outer shell and polyethylene liner - Outer diameter size compatible with 22.2mm cups: 41-46mm - Outer diameter size compatible with 28mm cups: 47-60mm - Provides compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hip joint with a non-cemented part, long handle, and a spindle with anti-slip grooves.

4

Set

1. Femoral Handle: The handle has a 135-degree angle at the femoral end, with ridges to prevent sinking. Material: Titanium 6 - Aluminum 4 - Vanadium alloy, coated with two layers: one layer of titanium powder and one layer of hydroxyapatite. The handle is 12/14mm in diameter, with a 5 degree taper and polished to a mirror finish. The handle has two screw holes for adjustment. Available in three sizes: 12; 14; and 16mm, with handle lengths of 200; 250; and 300mm. Adjustment screws: 5.5mm diameter, 28-55mm long; 3.2mm diameter, 30-35mm long. 2. Ball Head: The outer surface is made of stainless steel with a mirror finish. The inner surface is made of polyethylene. Available in two sizes with increments of 2: 42-58mm (corresponding to a ball size of 22.2mm); and 42-60mm (corresponding to a ball size of 28mm). The ball head has a locking mechanism to prevent dislocation. 3. Femoral End: Made of stainless steel. Available in two sizes with increments of 2: 12/14mm (corresponding to a ball size of 22.2mm): -3; 0; +3; +7; and 12/14mm (corresponding to a ball size of 28mm): -3.5; 0; +3.5; +7. Compatible accessories are also provided.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The hip joint is made of non-cemented material, and the ball-and-socket mechanism includes a locking system to prevent dislocation.

46

Set

1. Femoral Stem (Shaft): The stem angle is 135 degrees. Material: Titanium 6-Aluminium 4-Vanadium alloy (TA6V) according to ISO 5832-3 standard, with a double coating consisting of a layer of titanium powder (T40) and a layer of hydroxyapatite. The stem has a diameter of 12/14mm, a length of 40 minutes, an elliptical shape, and is polished to a mirror finish. Dimensions: size x length: 9 x 130mm; 10 x 140mm; 11 x 145mm; 12 x 150mm; 13 x 155mm; 14 x 160mm; 15 x 165mm; 16 x 170mm. The stem has cross-sectional grooves to prevent sinking and longitudinal grooves to prevent rotation. It is pre-sterilized by gamma irradiation. 2. Femoral Head (Cylinder): The outer surface is made of stainless steel, polished to a mirror finish. The inner surface is made of polyethylene. Sizes: 42-58mm increments of 2 correspond to a diameter of 22.2mm; 42-60mm increments of 2 correspond to a diameter of 28mm. The femoral head has a locking mechanism to prevent dislocation. 3. Femoral Head (Ball): Material: Stainless steel according to ISO 5832-9 standard. Sizes: 12/14mm with a diameter of 22.2mm: available in sizes 0; +3; 12/14mm with a diameter of 28mm: available in sizes -3.5; 0; +3.5; +7. Compatible accessories are also provided.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full hip joint without standard cement

10

Set

1. Femoral Implant: Cementless femoral component compatible with INLOCK X type polyethylene cushion – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). Coating: Titanium foam (500 µm) and hydroxyapatite (40 µm). - Size: 14 sizes (from size 40 to 64), compatible with a stem diameter from Ø22.2 mm to Ø36 mm. – Features a hemispherical head with a 2mm flat top, increasing compression force up to 1.4 mm at the equator, with a range of motion up to 142°. - 3 screw holes - Internal ridges on the femoral component allow for a click-and-lock mechanism, ensuring long-term stability and preventing cushion rotation. 2. Highly Crosslinked Polyethylene Cushion: – Material: Highly crosslinked polyethylene (Chirulen® 1020 X-ASTM F2565) - Size: 22.2, 28, 32, 36 mm, with 0° and 10° angles; compatible with stems of 40 – 64mm, with a pitch of 2mm. – Material properties reduce wear, reducing the risk of osteoporosis. 3. Femoral Head: – Material: Cobalt-chrome head (CoCrMo-ISO 5832-12), compatible with 12/14 5°40' stem - Size: Head diameter (offset corresponding): Ø 22.2 (+0, -2, +4); Ø 28 (+0, ±3.5, +7); Ø 32 (+0, ±4, +8); Ø 36 (+0, ±4, +8)mm 4. Cementless Femoral Stem: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3), 225 +/- 25 µm thick, coated with hydroxyapatite 120 +/- 35 µm - Size: 8-20, length: 115-190mm – Compatible with 12/14 5°40' stem. Stem angle 129° - Features a self-locking square design, providing lateral stability to the stem, and a gradually opening design to securely fix the acetabular region. 5. Femoral Screws: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). - Size: 6.5mm diameter. Screw length from 15mm to 60mm, with a pitch of 5mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Fully articulating hip joint without cement, curved handle design, handle stem angle of 126 degrees, coated with calcium phosphate (CaP) on metal and polyethylene (PE).

10

Set

Designed with anatomical considerations for the femur, featuring an external coating of HX (15µm thick calcium phosphate coating), and a design to prevent sinking and rotation. A separate handle system is available for both left and right femurs in 16 sizes. The handle has a CCD angle of 126 degrees and a tapered end with dimensions of 12/14. Femoral Heads: CoCrMo: Sizes available are 28(-3.5,0,+3.5)mm, 32(-4,0,+4)mm, and 36(-4,0,+4)mm. X-LINKed High Molecular Weight Plastic Cushioning: Available in sizes with an inner diameter of 28mm (socket size 42-44mm), 32mm (socket size 46-48mm), and 36mm (socket size 50-72mm). Features a 5mm anti-dislocation ridge and locking features. MobileLink Press Fit Titanium Alloy Socket: Made of titanium alloy (Ti6Al4V) with a plasma coating (pure plasma spraying technology) or calcium phosphate coating (TiCaP) on the outside. Includes 3 screw holes for support, or multiple screw holes for support in revision surgeries. Compatible with both double-motion and offset cushioning materials for use during surgery. Available in 16 sizes from 42-72mm, with an increase of 2mm per size. 6.5mm Diameter Socket Screws: Lengths available are 15-80mm. Includes a set of compatible surgical instruments and accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Totally cementless double-motion hip joint

120

Set

1. Femoral Head (Ball): The ball and cushion are molded as a single unit; the ball moves within the cushion, which moves within the cup, creating double movement. Material: Stainless steel according to ISO 5832-9 standard. Size: 12/14mm diameter, 22.2mm height: available in sizes 0; +3; 12/14mm diameter, 28mm height: available in sizes -3.5; 0; +3.5; +7 2. Cushion (Liner): Material: High-molecular weight polyethylene (UHMWPE) according to ISO 5834-2 standard. Sizes: 44-60mm diameter with a 2mm step, corresponding to ball heights of 22.2mm; 48-60mm diameter with a 2mm step, corresponding to ball heights of 28mm. 3. Cup: The outer surface has two layers: the lower layer is coated with titanium powder, and the upper layer is coated with full hydroxyapatite. The outer ring has 6 fixing studs to prevent rotation; the top of the cup has 4 anti-flip and anti-rotation studs. The inner surface is highly polished. Material: Cobalt - Chrome - Molybdenum alloy. Size: 44-60mm diameter with a 2mm step. Cups are designed to be permanently attached to the ball, pre-sterilized by gamma irradiation. 4. Femoral Stem (Shaft): The neck angle of the stem is 135 degrees. Material: Titanium 6 - Aluminium 4 - Vanadium (TA6V Alloy) according to ISO 5832-3 standard, coated with two layers consisting of a titanium powder (T40) and hydroxyapatite layer. The stem neck is 12/14 degrees at 40 minutes, elliptical in shape, and mirror polished. Size: diameter x length: 9 x 130mm; 10 x 140mm; 11 x 145mm; 12 x 150mm; 13 x 155mm; 14 x 160mm; 15 x 165mm; 16 x 170mm. Cross-sectional grooves to prevent sinking, and longitudinal grooves to prevent rotation. Pre-sterilized by gamma irradiation. - Supplied with compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full-length swivel joint with a cement-filled barrel and a double-action, non-cemented bearing; stainless steel head.

2

Set

1. Femoral Stem: Made of stainless steel. The stem has a 12/14 degree angle and a 40-degree curve, with a polished mirror finish. Sizes available: 12mm, length 200; 250mm. Pre-sterilized via gamma irradiation. 2. Liner: The cushion and dome are molded as a single piece, allowing for independent movement between the cushion and dome. The cushion slides within the dome, while the dome slides within the cushion. Material: Polyethylene. Sizes available in increments of 2, corresponding to domes with diameters of 22.2mm (44-60) and 28mm (48-60). 3. Implant: The outer surface is coated with two layers using a vacuum process: the lower layer is coated with titanium powder, and the upper layer is coated with hydroxyapatite. The outer ring has 6 fixing pins to prevent rotation. The top of the implant has 4 anti-flip pins. Material: Cobalt - Chrome alloy. Sizes available in increments of 2, corresponding to implants with diameters of 46mm (46-60) and 48mm (48-60). 4. Cement FIX1/FIX3: Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Flexible biaxial cementless total hip joint

44

Set

1. Non-cemented femoral head: – TA6V ELI titanium alloy material, with two layers of porous titanium coating to promote bone ingrowth and HA (hydroxyl apatite) coating for both internal and external bone growth. – Available in two types: with and without anti-settlement grooves on the handle, with longitudinal and transverse slots on the handle body. – Handle neck angle is 135 degrees, with a taper of 12/14. The corresponding sizes and lengths are: 9x130mm, 10x140mm, 11x145mm, 12x150mm, 13x155mm, 14x160mm, 15x165mm, 16x170mm, 18x180mm, and 20x190mm. – Corresponding handle offsets: 9x41.5mm; 10x42.3mm; 11x43.1mm; 12x43.9mm; 13x44.8mm; 14x45.6mm; 15x46.4mm; 16x47.2mm; 18x48mm; and 20x48.9mm. 2. Non-cemented acetabulum: The non-cemented acetabulum is angled at 10 degrees relative to the equator, with a double coating of pure porous titanium and HA (hydroxyl apatite). Six grooves are marked on the acetabulum according to the meridian (every 60 degrees has one groove), and each groove is aligned with the tool used to install the acetabulum before insertion. There are 10 sizes: 44/46/48/50/52/54/56/58/60/62 mm, without screws. The 44/46 acetabulum uses a 22.22mm chamfer, and the 48 to 62 acetabulum uses a 28mm chamfer. 3. Acetabulum liner: Polyethylene material for 22.22mm/28mm diameter, with 10 sizes, the acetabulum liner is used with one acetabulum. 4. Femoral head stem: Stainless steel (ISO 5832-9), 22.22mm/28mm diameter, femoral stem length: -4; +0; +4 mm; 28mm chamfer length: -3.5; +0; +3.5; +7 mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Plasma neck cementless total hip joint set

10

Set

1. **Pellet Cage:** A spherical cage with a single 152° arc and a flat 14° dome, with a porosity of 30%, a thickness of 114µm, available in sizes from 44mm to 70mm, with a pitch of 2mm. 2. **Inner Liner:** Made of X-linked Poly (cross-linked), with a 0° and 15° edge lip. The inner liner is securely fastened using the Rim-Lock system. 3. **Femoral Head:** Made of Cobalt Chrome, with diameters of 28mm, 32mm, and 36mm. Features a +/-0mm, ±3.5mm, +7mm adjustment range with a taper of 12/14. 4. **Femoral Neck:** With a classic 135° straight neck angle and a neck offset: Short (35-42mm), Medium (37-44mm), Long (42-49mm). Classic 8° Varus angle with a neck offset: Short (38-45mm), Medium (43-50mm), Long (46-53mm). The titanium alloy handle has a Plasma coating (0.5mm). Sizes: 1-10, length: 125, 135, 140, 145, 150, 155, 160, 165, 170, 175mm. M/L with 27-36mm; A/P Thick 12-19mm. 5. **Titanium Cage Screw:** 6.5mm diameter, length from 15-50mm (with a pitch of 5mm) - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full hip joints without cement, plasmapore cover, buffer combined with vitamin E

5

Set

1. Femoral Stem – Material: Ti6Al4V titanium alloy or equivalent. – Stem neck is integrated with the stem body, with a neck angle of 135° – Stem size ranges from 8-18 (corresponding to a head diameter of 8-18mm), in increments of 1mm – Stem length (from neck to end of stem) 145-190mm. – The main load-bearing surface at the near end is covered with a thick, 0.35mm layer of rough titanium. – The upper part has rotating stops at the large transition and ridges along the upper side for support. 2. Femoral Head: – Material: Cobalt-chromium CoCrMo – Size: 12/14. Diameters are 28; 32; 36mm 3. Bearing Surface: – Material: UHMWPE-XE polyethylene with vitamin E (0.1% tocopherol) – This combination provides long-term resistance to oxidation and wear due to the highly crosslinked polyethylene. – The minimum thickness of the bearing surface in the main load area is 5.5mm. – The bearing surface design includes a rear lip for stability, and both are secured to the femoral head using a compression mechanism. – Size: Available in at least 10 sizes, suitable for femoral heads with diameters of 22.2mm, 28mm, 32mm, 36mm, and femoral necks with diameters from 40-70mm. 4. Non-Cementing Artificial Femoral Neck: – Material: Ti6Al4V titanium alloy or equivalent. The surface of the femoral neck is coated with a thick layer of ultra-rough pure titanium using plasma spraying technology in a vacuum environment, with a coating thickness of approximately 0.35mm and a porosity density of about 50%, which supports bone fusion. – Design: arched shape, flattened at the top by approximately 1.5mm, with smooth spines to support fixation to the bone in the stem and femoral neck ring. – Size: Available in sizes from 40mm - 70mm. Minimum 3 screw holes. Suitable for both polyethylene and ceramic liners. 5. Femoral Neck Screws: – Material: Ti6Al4V titanium alloy or equivalent. – Design: self-tapping, rotating +/- 9° – Size: Diameter of 6.5mm; length from 16-68mm, in increments of 4mm. – Supplied with compatible tools

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Full hip joint without cement corner neck 125 degrees

10

Set

1. Femoral Implant: Cementless femoral component compatible with INLOCK X type polyethylene cushion – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). Coating: Titanium foam (500 µm) and hydroxyapatite (40 µm). - Size: 14 sizes (from size 40 to 64), compatible with stems with diameters from Ø22.2 mm to Ø36 mm. - Hemispherical design with a 2mm flat top, increasing compression force, reaching 1.4 mm at the equator, with a range of motion up to 142°. - 3 screw holes – Internal ridges on the femoral component allow for a click-and-lock mechanism, ensuring long-term stability and preventing cushion rotation. 2. Highly Crosslinked Polyethylene Cushion: – Material: Highly crosslinked polyethylene (Chirulen® 1020 X-ASTM F2565) - Size: 22.2, 28, 32, 36 mm, with 0° and 10° angles; compatible with stems of sizes 40-64mm, with a step size of 2mm. – Material properties reduce wear rate and minimize the risk of osteoporosis. 3. Femoral Head: – Material: Cobalt-chrome head (CoCrMo-ISO 5832-12), compatible with 12/14 5°40' stems - Size: Head diameter (offset corresponding): Ø 22.2 (+0, -2, +4); Ø 28 (+0, ±3.5, +7); Ø 32 (+0, ±4, +8); Ø 36 (+0, ±4, +8) mm 4. Cementless Femoral Stem: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3), 225 +/- 25 µm thick, coated with hydroxyapatite 120 +/- 35 µm - Size: 9-18 mm long, 130-180mm - Compatible with 12/14 5°40' stems. Stem angle of 125° – Four-sided self-locking design, providing lateral stability to the stem, and a gradually opening design to securely fix the acetabulum. 5. Femoral Screws: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). - Size: 6.5mm diameter. Screw length from 15mm to 60mm, with a step size of 5mm - Supplied with compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cementless Z long shank removable total hip joint set

10

Set

1. Femoral Implant: A single-piece, spherical implant with a 152° dome and a 14° flat rim, with a porosity of 30% and a thickness of 114µm. Available in sizes from 44mm to 70mm, with a pitch of 2mm. 2. Liner: Made of X-linked Poly (cross-linked), with a 0° and 15° anti-rotation edge. The liner is securely fixed using the Rim-Lock system. 3. Femoral Head: Made of Cobalt Chrome, available in sizes of 28, 32, and 36mm. Features a range of adjustment (+0mm, ±3.5mm, +7mm). 4. Neck: Made of Titanium and Cobalt Chrome. The neck angle is Varus (127°), Neutral (135°), or Valgus (143°). The neck length ranges from 27mm to 38.5mm. 5. Femoral Shaft: Made of Titanium. The classic Varus neck angle of 8° corresponds to a neck offset of 127°. The shaft is available in short (34-43mm) or long (43-51mm) versions. The classic Neutral neck angle of 135° corresponds to a neck offset of 127°. The shaft is available in short (31-40mm) or long (39-47mm) versions. Lengths range from 176mm to 216mm. 6. Titanium Implant Screw: Available in lengths from 15mm to 50mm (with a pitch of 5mm). Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Fully mobile hip joint (without cement), standard stem (without cement), ceramic-on-ceramic

10

Set

1. Femoral Stem: Self-locking type, with a notched handle – Material: Titanium aluminum vanadium alloy – Coated with 2 layers: Titanium 120µm and Hydroxyapatite 80µm – Handle angle: 135°. Tapered end: 12/14 - 5°40'. – Handle has an elliptical shape and is polished to a mirror finish – Sizes: 9 x 130mm, 10 x 140mm, 11 x 145mm, 12 x 150mm, 13 x 155mm, 14 x 160mm, 15 x 165mm, 16 x 170mm. 2. Guide Tube: – Material: Titanium aluminum vanadium alloy, coated with 2 layers: Titanium 120µm and Hydroxyapatite 80µm – Has 4 pins around the edge and 4 pins at the top – Sizes: 46-62, increments of 2 3. Ceramic Cushion Layer: – Material: Biolox Delta alumina/zirconia composite ceramic – Tapered end: 18° 55' – Sizes: + Size 39 corresponds to guide tubes of 46 and 48mm and a tip diameter of 32mm + Size 44 corresponds to guide tubes of 50, 52mm and a tip diameter of 36mm + Size 48 corresponds to guide tubes of 54, 56, 58, 60, 62mm and a tip diameter of 36mm 4. Ceramic Femoral Head (Tip): – Material: Biolox delta alumina composite ceramic – Diameter: 32mm (-4, 0, +4), 36mm (-4, 0, +4) 5. Guide Tube Screws: – Material: Titanium aluminum vanadium alloy – Diameter: 5.5mm, length: 20-45mm, increments of 5mm * Sterilized by Gamma irradiation – Supplied with compatible accessories

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ceramic on poly cement does not cement

12

Set

1. Femoral Implant: Cementless femoral implant compatible with INLOCK X type polyethylene cushion – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). Coating: titanium foam (500 µm) and hydroxyapatite (40 µm). - Size: 14 sizes (from size 40 to 64), compatible with a head diameter from Ø22.2 mm to Ø36 mm. - A hemispherical design with a 2mm flat top, increasing compression force up to 1.4 mm at the equator, with a range of motion up to 142°. - 3 screw holes – Internal ridges on the implant allow for a click-and-lock mechanism, ensuring long-term stability and preventing cushion rotation. 2. Highly Crosslinked Polyethylene Cushion: – Material: Highly crosslinked polyethylene (Chirulen® 1020 X-ASTM F2565) - Size: 22.2, 28, 32, 36 mm, with 0° and 10° angles; compatible with 40–64mm size implants, with a 2mm step increase. – Material properties reduce wear rate, reducing the risk of osteoporosis. 3. Femoral Head: – Material: ceramic (Al2O3 + ZrO2-ISO 6474-2) - Size: Head diameter (offset corresponding): 28 (+0, ±3.5), 32 (+0, ±4,+7), 36 (+0, ±4,+8), 40 (+0, ±4,+8) mm. 4. Cementless Femoral Neck: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3) with a thickness of 225 +/- 25 µm, coated with hydroxyapatite with a thickness of 120 +/- 35 µm. - Size: 8–20, length: 115–190mm – Compatible with 12/14° 40' taper neck. Neck angle 129° – A four-sided self-locking design provides stability for the neck, while a gradually expanding shape securely fixes the acetabulum. 5. Implant Screws: – Material: Titanium alloy (Ti6Al4V-ISO 5832-3). - Size: 6.5mm diameter. Screw length from 15mm to 60mm with each step increasing by 5mm – Provides synchronized compatibility

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Set of water washing water pumps during surgery

5

Box

The product is used for cleaning infected wounds, disinfecting soft tissues, and other applications. The product comes in three lines: Surgical – Spinal – Wound, each with different nozzle types depending on the line. The kit includes: Nozzles, machine body, power cable, nozzle outlet, power cord, and battery. The gun has 3 positions: low power, high power, and stop position. Material: Medical-grade plastic for the main body, nozzles, power cable, and water outlet. Power supply: Internal device power (8 x 1.5V DC batteries), AA alkaline batteries. Voltage: 12V. Sterilized by radio waves. EMC: Complies with IEC 60601-2021 regulations for medical devices with electrical components. Environmental conditions: During use, temperature from 10°C to 40°C, humidity from 30% to 75%, air pressure: 700hPa - 1060hPa. Storage and transport temperatures: Temperature from -20°C to 59°C, humidity <=90%, air pressure: 500hPa - 1060hPa.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cement with antibiotics

5

Box

Composition: - The cement consists of a polymer powder and a single-component liquid containing broad-spectrum antibiotic Gentamicin. - Standard viscosity – Medium viscosity – High viscosity - Used for hip, knee, and other joints. Ingredients: + Polymer Powder Pack (41.6g): Polymethyl Methacrylate (PMMA), Benzoyl peroxide (BPO), Barium sulphate (BaSO4), Gentamicin sulfate. + Liquid (High viscosity – Low viscosity: 14.4g, Medium viscosity: 18.8g): Methylmetharcylate (MNA), Butylmethacrylate (BMA), Dimethyl paratoluidine (DMPT) and Hydroquinone (HQ). Setting Time: - High viscosity: setting time is 10 minutes (at 20°C (+/-1), humidity is 50% (+/-10%)). - Low viscosity: setting time is 12 minutes (at 20°C (+/-1), humidity is 50% (+/-10%)). - Medium viscosity: setting time is 13 minutes (at 20°C (+/-1), humidity is 50% (+/-10%)). Heat Generation: Due to its low viscosity, the maximum temperature during a chemical reaction is minimal. Supports the use of hip and knee joint spacers.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

10x15 cm polypropylene mesh used for inguinal hernia repair

4

Pieces

Dimensions: 10cm x 15cm. The monofilament polypropylene is woven into a flexible and durable mesh.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

15x15 cm polypropylene mesh used in groin hernia repair

5

Pieces

Dimensions: 15 cm x 15 cm. The polypropylene monofilament is woven into a flexible and durable mesh.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6x11 cm polypropylene mesh used in groin hernia repair

48

Pieces

* Material: Polypropylene * Hole size: 1.2 x 0.9 mm, fiber diameter 0.15 mm * Weight: 57 (g/m²) * Tensile strength: 750 kPa * Warp/weft tensile force: 275N / 250N * Thickness: 0.5mm * Non-stick, transparent, soft, and durable.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

7.5 x 15 cm polypropylene mesh used in inguinal hernia repair

5

Pieces

Dimensions: 7.5 cm x 15 cm. The monofilament polypropylene is woven into a flexible and durable mesh.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Heavy-duty polypropylene sheet, size 5x10 cm

5

Pieces

Heavy-duty polypropylene sheet, with a hole size of 0.8mm, a density of 82g/m², a thickness of 0.48mm, and dimensions of 5x10cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Polypropylene mesh used for inguinal hernia repair, size 30x30 cm

5

Pieces

Dimensions: 30cm x 30cm. The monofilament polypropylene is woven into a flexible and durable mesh.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kidney dialysis pressure regulators

5

Female

The 0.2-micron filter protects against direct contact between the pressure catheter and both veins and arteries.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

1.3 m2 low-pressure dialysis membrane

2.340

Female

Low-flux dialysis membrane; material: α Polysulfone Pro; gamma irradiation sterilization; surface area of 1.3㎡, blood volume ≥ 80ml, Kuf ≥ 11ml/h/mmHg. Blood flow rate Qb ≥ 300ml/min, fluid flow rate Qd ≥ 500ml/min, Urea clearance ≥ 916; clearance rates: Urea: 257 ml/min, Creatinine: 228 ml/min, Phosphate: 175 ml/min, Vitamin B12: 101 ml/min.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

1.5 square meter low-pressure dialysis membrane

2.376

Female

Filter Membrane: Polynephron, free of Bisphenol-A (BPA) and DEHP. Area: 1.5 m². Blood volume ≥ 91 mL. Ultrafiltration rate: KUF ≤ 16 (mL/hour/mmHg). Transmembrane pressure ≥ 500 mmHg. Fiber wall thickness ≥ 40 µm. Filter housing: Polypropylene. Cleanability (with Qb ≥ 300 ml/min): Urea: 261 ml/min Creatinine: 236 ml/min Phosphate: 194 ml/min Vitamin B12: 117 ml/min. Sterilization: Gamma irradiation

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

1.5 square meter high-pressure dialysis membrane

50

Female

High Flux Dialysis Membrane; Material: Polysulfone; Sterilized by Gamma Irradiation; Surface Area: 1.5 ㎡, Volume Capacity ≥ 90 ml, Ultrafiltration Rate ≥ 50 (ml/h/mmHg); Flow Rate ≥ 300ml/minute: Clearance Rates: Ure ≥ 245 ml/hour, Creatinine ≥ 224 ml/hour, Phosphate ≥ 220 ml/hour, Vit B12 ≥ 148 ml/hour; Sieving Coefficient: β2-microglobulin ≥ 0.8; Albumin ≥ 0.005.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

α-polysulfone renal filtration membrane, 1.6 m², high pressure

50

Fruit

- Membrane material: Micro-undulated Polysulfone - Housing material: Polycarbonate - Filter element material: Polyurethane - Membrane area: 1.6 m² - Filtration efficiency ≥ 24.7 (ml/hr*mmHg) - Blood flow volume ≥ 86 ml - Flow rate ≥ 300 ml/min for Urea, Creatinine, Phosphate, Vitamin B12, and Inulin. - Wall thickness ≥ 40 µm, fiber diameter 200 µm. - Sterilization method: Gamma irradiation

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Super Highflux 1.7 m² Kidney Filter

240

Fruit

Ingredients: Polyethersulfone fiber filter membrane, free of Bisphenol-A (BPA) and DEHP. Area: 1.5 - 1.7 m2. Ultrafiltration rate: KUF: 65 - 67 (mL/hour/mmHg). Filter housing: Polypropylene. Cleansing capacity (at Qb: 300ml/min): Ure ≥ 282 ml/min Creatinine ≥ 270 ml/min Phosphate ≥ 255 ml/min Ultrafiltration rate: β2-Microglobulin = 1 Albumin ≤ 0.003 Sterilization: Gamma radiation

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

HA130 Blood-absorbing fruit

10

Fruit

Material: PC Adsorbent Material: Broad-spectrum neutral resin, consisting of styrene divinylbenzene crosslinked twice. Membrane material: Collodion Sterilization method: Gamma irradiation Source of heat: Non-pyrogenic Adsorption volume ≥ 130ml Blood chamber volume ≥ 114ml Adsorption area ≥ 52,000 m² Internal resistance ≤ 4 kPa Maximum blood flow rate: 200-250 ml/min Pressure resistance ≤ 100 kPa Particle strength ≥ 8.1 N Adsorption range: 5-30 kDa Static adsorption ratio after 2 hours in vivo: + IL-6: 21.8%~31.5%.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

HA230 Blood-absorbing fruit

10

Fruit

Material: PC Adsorbent Material: Broad-spectrum neutral resin, consisting of styrene divinylbenzene crosslinked twice. Membrane Material: Collodion Sterilization Method: Gamma irradiation Non-pyrogenic Adsorption Volume ≥ 230ml Blood Chamber Volume ≥ 145ml Adsorption Area ≥ 70,000 m² Internal Resistance ≤ 4 kPa Flow Rate: 200 - 250 ml/minute Pressure Tolerance ≤ 100 kPa Adsorbent Particle Strength ≥ 8.1 N Adsorption Range: 500-10 kDa Static Adsorption Ratio after 2 hours in vivo: + Paraquat ≥ 80.4% + Pentobarbital ≥ 92.9% + Dichlorvos ≥ 51.5% + Antipsychotic ≥ 87.9%

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Single-use blood absorption pad, HA280

10

Fruit

Material: PC Adsorbent Material: Broad-spectrum neutral resin, consisting of styrene divinyl benzene crosslinked twice. Membrane material: Collodion Sterilization method: Gamma irradiation Non-pyrogenic Adsorption volume ≥ 280ml Blood chamber volume ≥ 160ml Adsorption area ≥ 91,000 m² Flow rate: 200 - 250 ml/minute Particle strength ≥ 8.1 N Adsorption range: 15-100 kDa Static adsorption ratio after 2 hours in vivo: + IL-6: 21.8% ~ 31.5% + TNF-α: 44.2% + IgA: 48.3% + IgG: 53.6%

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

HA330 single-use blood collection device

4

Fruit

Material: PC Adsorbent Material: Broad-spectrum neutral resin, consisting of styrene divinyl benzene crosslinked twice. Membrane material: Collodion Sterilization method: Gamma irradiation Non-pyrogenic Capacity ≥ 330ml Cavity volume ≥ 185ml Adsorption area: 104.000 m2 Internal resistance: ≤ 4 kPa Blood flow rate: 200 - 250 ml/min Pressure tolerance: ≤ 100 kPa Particle strength ≥ 8.1 N Adsorption range: 10-60 kDa Static adsorption ratio after 2 hours in vivo: + Endotoxin: 36.7% ~ 52.5% + TNF: 31.1% ~ 71.2% + IL-1β: 35%

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

HA330-II single-use blood collection device

10

Fruit

Material: PC Adsorbent Material: Broad-spectrum neutral resin, consisting of styrene divinylbenzene crosslinked twice. Membrane Coating Material: Collodion Sterilization Method: Gamma irradiation Non-pyrogenic ≥ 330ml adsorption volume ≥ 185ml blood chamber volume 104,000 m2 adsorption area Blood flow rate: 200 - 250 ml/minute Particle strength ≥ 8.1 N Adsorption range: 20-200 kDa Static adsorption ratio after 2 hours in vivo: + Total Bilirubin: 16% + Total Bile Acid: 45% + Ammonia: 30.5% - 60% + Endotoxin: 37.7% - 56.3%

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Bilirubin-absorbing fruit steamer, Model BS330

4

Fruit

Material: PP Adsorption Material: Anion exchange resin, consisting of a styrene-divinylbenzene copolymer treated with a double crosslinking technology, exhibits high biological compatibility. - Adsorption volume ≥ 330mL - Blood chamber volume: 160mL - Absorption area: 104,000 m2 - Internal resistance ≤ 4 kPa - Maximum blood flow rate ≥ 50 mL/min - Pressure resistance ≤ 100 kPa - Lower limb force ≥ 8.1 N - Sterilization method: Moist heat sterilization - Static adsorption ratio after 2 hours in vivo: + Total Bilirubin: 52.8~64.1% + Total Bile Acid: 62.2~80.5%

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Acute Blood Filter, Model 2.0

5

Female

Emergency blood filtration membrane; material: Polysulfone; sterilized by Gamma irradiation; surface area: 2.0 ㎡, filtration rate: Myoglobin = 0.55; β2-microglobulin = 0.8; Albumin = 0.005.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The complete blood filtration kit.

5

Female

Blood filtration set for CVVH/CVVHD/CVVHFD/HF/HFD/HD on the Diapact CRRT machine, consisting of: 2 drainage bags, 2 bag connection heads, arterial line, replacement fluid/hemodialysis inflow line; and ultrafiltration/hemodialysis outflow line.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

0.5 QM blood filtration device

5

Female

0.5 m2 blood separation membrane, made of polyethersulfone, with a fiber diameter of 300 micrometers and a fiber thickness of 100 micrometers, maximum pore size of 0.5 micrometers, ETO sterilization, 48 ml blood chamber volume, 154 ml plasma chamber volume, blood flow rate of 60 - 180 ml/minute, plasma flow rate = 30% of blood flow rate, maximum membrane pressure of 100mmHg.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The complete blood separation kit for plasma extraction.

5

Female

PEX blood separation set for Diapact CRRT machine, consisting of: Arterial line, venous line; Blood separation filter adapter, Replacement fluid lines, Blood output line.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Virus and toxin filtration membrane

5

Female

The polysulfone membrane has a high absorption capacity and can remove bacteria and endotoxins exceeding > 106 IU/ml. The filter lifespan is approximately 150 hemodialysis runs or about 900 hours, with excellent stability and compatibility with the Dialog+ machine.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The set includes the tubing and blood filter used continuously with the OMNI machine.

24

Set

The set includes: Arterial blood lines with secondary tubing for citrate/heparin delivery; Venous blood lines with secondary tubing containing calcium and a 2L waste collection bag; Hemodialysis tubing with warming bag; Drainage and replacement fluid lines; A 7L drainage bag; A 1.6m2 blood filtration membrane. Sterilized by Ethylene Oxide.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Continuous dialyzer and wire set with connection to Adsorbent pod for OMNI machine

8

Set

Blood tubing set with open connectors and a 1.6m² filter for CVVHD, CVVHDF therapies, combined with adsorptive blood filtration; including: Arterial line with secondary lines containing citrate/heparin; Venous line with secondary lines containing calcium and a 2-liter waste collection bag; Hemodialysis line with warming bag; Drainage line with sampling port; Infusion line; 7-liter waste bag; 5 sets of pressure monitors with 0.2 μm filters. OMNIset® Plus is suitable for heparin and citrate anticoagulation. Sterilized by Ethylene Oxide.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Set of tubing and blood filter used for the Omni machine

5

Set

OMNIset TPE plasma separation wire set 0.7m2 includes the following parts: - Arterial wire with auxiliary guide wire for heparin infusion, needle puncture port and sharp tip; - Intravenous line with 2 liter waste bag for fluid priming, needle puncture port and infusion port; - Waste fluid line with sampling port; - Replacement fluid line with warming bag; - 7 liter waste bag - Filter to protect pressure ports - 0.7 m2 OMNIplasmafilter® plasma separator: Polyethersulfone material, area 0.7 m2

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Super clean fluid filter

20

Female

Artificial kidney dialysis filter: Membrane area: 2.2 m2; Filter material: Polysulfone; Housing material: Polypropylene.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Kit for continuous blood filtration machines

6

Set

The kit for continuous blood filtration includes: - 1 ultrafiltration membrane, made of polysulfone material, with a membrane area of 1.4 m2, a filling volume of 100 ml, and sterilized by inline steam. - 1 cassette set.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Plasma filter kit for continuous blood filtration machines

5

Set

The kit for plasma filtration includes: - 1 plasma filter, made of polysulfone membrane with a surface area of 0.6 m2, a volume capacity of 67 ml, and sterilized by steam; - 1 cassette set; - 1 10L drainage bag.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Discharge bag

6

Bag

Disposal bag with a male Luer-Lock connection.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

ECMO artificial lung heart in emergency resuscitation

5

Set

- Length of arterial and venous tubing (each tube): 1.7m - Maximum pressure: 1000mmHg (133kPa) - Volume of blood: 620ml - Maximum blood flow rate: 7L/minute - Connector type for both arteries and veins: Locking connector - Compatible with the TERUMO SP-200 ECMO system currently used at the hospital.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ca-nuyn (Cannula) ECMO artery

5

Female

- Cannula configuration: Tubing; Guide wire. - Contents of the kit: Vascular access set; Guidewire; Introducer; Syringe; Disposable scalpel. - The outer surface of the tubing in contact with blood is coated with X-coating. - Outer diameter: 5.5mm - Length: 15cm - Connector type: Lock connector - Compatible with the TERUMO ECMO SP-200 system currently used at the hospital.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ca-nuyn (Cannula) ECMO veins

5

Female

- Cannula configuration: Tubing; Guide wire. - Contents of the kit: Catheter, Guidewire, Introducer sheath, Syringe, Disposable scalpel. - The outer surface of the tubing in contact with blood is coated with X-coating. - Outer diameter: 7mm - Length: 50cm - Connector type: Lock connector - Compatible with the TERUMO ECMO SP-200 system currently used at the hospital.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hydroponic nutrient delivery system for Visalis 500

5

Female

The pressure hose connecting the Visalis pump to the dispensing bottle.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Silicone drainage tube (for trauma)

10

Female

The minimally invasive treatment procedure helps minimize any negative impact on the healthy tear duct on the same side. - The perfect design allows for effective expansion that is appropriate for the size of the lacrimal punctum and tear duct. - The silicone tip of the suture is designed to be safe, allowing for secure fixation at the lacrimal punctum while also providing support during treatment. - Each box contains 1 silicone suture and 1 self-dissolving 6-0 polycryl suture. Specifications: Length: 40mm; Diameter: 0.64mm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Visalis 500 cassette drive

160

Female

The device includes: a cassette containing the infusion tubing and a dual-pump system with an attached waste bag. The infusion control line features a small droplet reservoir. The single-use sterile kit is designed for use with the VISALIS 500 phaco surgery system and is used to deliver physiological saline solution from the irrigation source to the surgical handpiece, as well as to transport tissue removed from the eye into a transparent waste bag during both the anterior and posterior portions of the procedure.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Mucus used in Phaco surgery 1.8%

200

Jar

Ingredients: Sodium Hyaluronate Ophthalmic Solution 1.8% High molecular weight (> 2.8 million Dalton) High viscosity (100,000-150,000 m.pas at 25°C) pH from 6.0-7.8

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Viscous fluid used in intraocular surgery

320

Female

The lubricating fluid used for phacoemulsification surgery must meet the following specifications: viscosity ≥ 2,000,000 Mpa, volume ≥ 0.8 ml, molecular weight ≥ 3.2 million Daltons, and contain 1.8% Sodium Hyaluronate with a permeability of 200-400 mosmol/kg and a pH of 6.8-7.6.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Crescent knife

10

Female

The Dao Crescent is used to create a tunnel during extra-capsular cataract surgery. It features a stainless steel blade with a size of ≥ 2.0 mm. Sterilized.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Phaco surgery with 2.2mm, 2.8mm, 3.0mm, and 3.2mm blades

520

Female

+ The tool is equipped with a safety cover. + Main materials: Handle: Polycarbonate; Blade: Stainless steel. Cover: Polycarbonate. - Features double-sided beveling and angled folding technology. - The ultra-thin blade significantly reduces penetration force and contributes to preserving the skin. - Satin-like surface for glare reduction. Excellent sharpness. - For 2.2mm blades: Double bevel, angle: 2.20 mm. Depth indicators of 1.50 and 1.75 mm ensure controlled diving. - For 2.75mm blades: Double bevel, angle: 2.75 mm. Depth indicators of 1.50, 1.75 and 2.00 mm ensure controlled diving.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Dao poking room for 15 degrees

520

Female

+ The blade is equipped with a safety cap. + Main materials: Handle: Polycarbonate; Blade: Stainless steel. Cap: Polycarbonate. - Double-sided, beveled edge design for straight cuts. - Ultra-thin blade significantly reduces cutting force and contributes to skin regeneration. - Satin-like surface provides glare reduction. - Excellent sharpness. High degree of sharpness. - Initial cutting angle: 15° double bevel, 1.0 mm straight.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hemostasis

10

Box

Standard-sized hemostatic clips (135 degrees), with a clip handle length of approximately 7.5 mm - pink color, effectively and quickly stop bleeding while minimizing damage to tissue. Suitable for various types of injuries at shallow depths and locations, including: ESD (biopsy in early cancer treatment) and POEM (oral endoscopy-guided tissue removal). Each set of clips is individually sterilized and packaged.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Disposable one-time use hemostatic clamp

256

Female

Endoscopic hemostasis forceps – Angle of jaw approximately 90-140 degrees – Jaw opening approximately 11-15 mm – Total length of the forceps when closed and open from the body is approximately 15 mm (±1mm) – Length of the clip arm when open ≥ 11 (±1mm) – Length of the clip arm when closed ≥ 6 (±1mm) – Tool length ≥ 2100 mm – The tool is integrated with a plastic handle and designed for single use – The hemostatic forceps are correctly positioned due to its multi-opening and closing function – Can be rotated 360 degrees in two directions – Body diameter ≥ 2.6mm – Sterilized

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical instruments for hemorrhoid surgery and a 3-row stitch applicator.

5

Female

- Includes 0 polypropylene thread, green color, 90cm length, 2 round needles (1/2 circle), 26mm diameter – outer diameter ≥ 34mm – cutting hole diameter 23mm – open pin height: 3.5mm – adjustable closed pin height: 0.75mm – 1.5mm – 3 rows of pins, with a minimum of 48 pins – pins made of pure titanium or equivalent – anorectal tube with markings.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Integrated endoscopic suture cutting device with assistance function

2

Female

Straight cutting and suturing instrument with variable speed gears for use in endoscopic surgery – Handle length ≥16 cm, can be bent at a 45-degree angle on each side, and rotate the suture strip 360 degrees. - Allows access to tissue from more than 5 positions on each side continuously. - Can accommodate ≥ 25 suture strips. - Compatible with "Straight, short, and curved head cutting and suturing instrument for endoscopic surgery"

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight cutting and suturing instruments in various sizes

2

Female

Straight suture and cutting instrument * Material: - Made of acrylonitrile butadiene styrene (ABS) and stainless steel - New blades in each cartridge * Size: - 60mm, 80mm straight suture and cutting instrument - Cutting length: 56mm, 76mm - Needle depth: 1.5mm- 2.0mm - Needle firing button on both sides - Cartridges can be used 10 times - Sterilized - Compatible with the same manufacturer's straight suture and cutting instruments

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Needle holders for straight suture cutting tools of various sizes

2

Female

Surgical sutures for straight cuts * Material: - Titanium pins (no alloy) * Dimensions: - Pin length: 60mm, 80mm - Cut length: 56mm, 76mm - Open pin height: 3.8; 4.8mm - Closed pin height: 1.5-2.0mm - Number of pins: 84 pins - Sterile - Compatible with straight cutting sutures from the same manufacturer

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Needle and thread loop/stitch and safety pin set (with 3 pins)

2

Female

Three-row suture and cutting tool: * Material: pure titanium or equivalent (non-alloy). * Design: three rows of needles with a minimum number of needles in each row: 33, 36, and 42. * Needle height when open: 4.5mm ± 2% * Adjustable needle height after closing: 1.0 mm - 2.5 mm ± 2% * Shaft length: 13 cm * Outer diameter: 25mm, 26mm, 29mm, 31mm, 32mm * Inner cutting diameter: 16mm, 17mm, 20mm, 21mm, 22mm * Sterile

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Surgical suture removal needles in various sizes

2

Female

Suture needles for straight cutting and suturing, endoscopic surgery: Material: Non-alloyed titanium or equivalent - Construction: ≥3 rows of evenly spaced needles on each side + Suture length of 30mm, 45mm, 60mm with both straight and short ends + Needle opening height: 2.0mm, 2.5mm, 3.25mm, 4.0 mm, 5.0mm (±2%) + Needle closed height: 0.75mm, 1.0mm, 1.5mm, 1.8 mm, 2.2mm (±2%). - The blade is integrated into the suture strip - Compatible with "Straight cutting and suturing instrument with multi-speed gears for assisting in both electrical and manual endoscopic surgery from the same manufacturer".

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Stent push

5

Female

- Working length: 1900 mm – Compatible with 7 Fr./8.5 Fr./10 Fr. stents – Suitable for instrument channels with a minimum diameter of 2.8 mm/3.2 mm/3.7 mm Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Mechanical lithotropy

5

Female

- Stone removal tool, tip type - Working length of 1950mm/1900mm, 30mm opening compatible with a 4.2mm tool channel - Compatible with stone removal tool handles. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Pebble

5

Female

- Available in various sizes - Features a C-shaped hook - Working length: 1900 mm, ball diameter: 8.5/11.5/15 mm / 15/18/20 mm, tip diameter: 5.5 Fr. - Suitable for channels with minimum diameter: 2.8 mm/3.2 mm - Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sugar ball

5

Female

- Round ball shape, transparent material – Image marking at the center of the ball – Reflective markings (at both ends) – Ball diameter after inflation: from 6 mm to 18 mm, ball length: 55/65 mm – Suitable for channels with a minimum diameter of 2.8 mm

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Handle for a rock pick

5

Female

- Handle for mechanical gravel blaster, reusable handle, operates using a rotating mechanism when blasting. Manufacturer: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Gravel traction basket

5

Female

- Features a 4-wire design with an integrated handle, which can be rotated, and includes a C-shaped hook and marking V. Working length: 1900mm, expands by 22mm. Suitable for tool channels with a minimum diameter of 2.8 mm. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Biliary cannula

5

Female

Short, 2-channel cannula with a minimum working channel diameter of 2.2/2.8mm, a working length of 1700mm/1950mm, and an end diameter of 3.5 Fr/4.5Fr. Compatible with guidewires, clearly visible under X-ray imaging, and features a C-hook and V-marking.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight bile duct stent

5

Female

- Ethylene Vinyl Acetate biliary plastic stent, straight type – Straight stents with diameters of 7 Fr./8.5 Fr./10 Fr and lengths of 70mm/90mm/100 mm. – Suitable for channels with a minimum diameter of 2.8mm/3.2mm/3.7mm. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Pig-tail bile duct stent

5

Female

- Ethylene Vinyl Acetate biliary plastic stent, pig tail type - Straight stents with a diameter of 7 Fr., lengths: 50mm/70mm/90mm/100 mm. - Suitable for channels with a minimum diameter of 2.8mm Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cutting knife

3

Female

- The C-Hook allows for the attachment of cutting instruments to the V-Holder™ or control handle of the endoscope. - Separate compartments for guide wires, cutting wires, and contrast injection syringes. - Working length: 1700 mm, cutting wire length: 25 mm/30 mm, tip diameter: 4.5 Fr. - Compatible with instrument channels with a minimum diameter of 2.8 mm, compatible with 0.035" guide wires. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Needle-shaped sphincter cutter

3

Female

- Safe coating – Separate compartments for guidewires, cutting wires, and contrast injection catheters – Rounded tip with tapered end – Integrated C-shaped hook, V-shaped housing, and V-shaped marking lines – Working length: 1700 mm, needle diameter: 0.2 mm, compatible with 0.035" guidewires – Suitable for channels with a minimum diameter of 2.8 mm Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Guide wire

10

Female

- 0.025"/0.035" straight-end, long-nose guide wire, with a 70mm water-repellent coating length, and a 4500mm working length. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ball pump tool

5

Female

- Capacity: 60cc, Pressure: 15 atm, Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electrocautery forceps

5

Female

Disposable electric hemostasis clamp. Provides accurate and reliable ESD-safe hemostasis technique support. Non-slip structure to securely grip bleeding points, rotating function, working length of 2.300 mm, compatible with endoscopes with a channel diameter ≥ 3.2mm, bite opening of 4mm. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Electrocautery hemostasis forceps for use in endoscopic procedures of the esophagus and stomach.

5

Female

Disposable electric hemostasis clamp. Provides accurate and reliable ESD-safe clamping techniques. Non-slip structure for a secure grip on bleeding points, rotating function, working length of 1.650 mm, compatible with endoscopes with ≥ 2.8mm channel diameter, bite width of 6.5 mm. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hematopsiia clamps peeled under the mucosa and burns gastrointestinal hemostasis

5

Female

Hemostatic forceps for dissection beneath the mucosa and hemostasis in the digestive tract during ESD (endoscopic submucosal dissection) surgery. Rotatable jaws. Working length of 1650 mm, compatible with instrument channel diameter ≥ 2.8mm, bite width of 5mm. Sterile. Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Polyp cut

5

Female

- Disposable polyp cutting forceps (suitable for both hot and cold cutting). The hexagonal-shaped forceps have thin wires – maximum insertion diameter: ≤ 2.6 mm, compatible with ≥ 2.8mm instrument channels, working length ≥ 230cm, jaw opening from ≥ 10mm to ≤ 15mm, wire diameter ≤ 0.3mm. - Cutting voltage: 1600 Vp, hemostasis voltage: 2900 Vp - Sterilized. - Compatible with GIF, CF, and PCF endoscopes with instrument channel inner diameters of: 2.8 mm, 3.2 mm (yellow); 3.7 mm, 4.2 mm, 6 mm (orange) Origin: G7

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Reusable laser pointer

4

Fiber

- Laser fiber used for endoscopic surgical lasers, flat tip, emitting laser beam forward, used together in kidney stone removal, BPH (benign prostatic hyperplasia), and soft tissue surgery. - The laser fiber consists of 3 layers: a core layer and an outer layer made from silica, and an outer shell made from ethylene tetrafluoroethylene (ETFE). - Diameter: 365 µm, 550 µm, 750 µm - Length: 3 m ± 0.2 m - Can be reused at least 30 times. Sterilize using steam or hydrogen peroxide plasma gas (Sterrad® technology). - Packaged in sterile Ethylene Oxide. - The laser fiber is used with Quanta System S.p.A/Italian surgical lasers, equipped with SMA 905 or SMA 906 or compatible N76 connectors.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Laser 365 μm sterilization guide

4

Female

- Core diameter: 365 μm. - Length: 3 meters - Sterile - Reusable - Compatible with the Richar Wolf laser system.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Laser 550 μm sterilization probe

6

Female

- Core diameter: 550 μm. - Length: 3 meters - Sterile - Reusable - Compatible with the Richar Wolf laser system.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Skin pebbles

8

Female

The kit includes: * 1 sheath: 18Fr (1 lumen) * 6 guide wires: 8Fr, 10Fr, 12Fr, 14Fr, 16Fr, 18Fr * 1 18G x 23cm needle * 1 J-tip guide wire, 0.032" x 80cm * 1 silicone catheter: 14Fr x 5ml * Expiry date: 60 months

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The bracket is both canopy and sucking for surgery

12

Female

* Construction consists of an inner barrel and an outer shell. * Sizes: * Inner barrel: 10Fr, 12Fr, 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr, 26Fr * Outer shell: 12Fr, 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr, 26Fr, 28Fr * Length: 13cm, 15cm, 17cm, 21cm * Shelf life: 60 months * Includes compatible digging and suction tools for use.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft Spout Pipe, 9.2 Fr

10

Female

- Working channel: 3.6 Fr - Angle of rotation: -285 degrees; +285 degrees - Resolution: 400 x 400 pixels - Field of view: 90 degrees - Angle of sight: 0 degrees - Focal length range: 3 - 50 mm - Working distance: 650mm - Insertion tube width: 9.2 Fr - Maximum extension length: 9.2 Fr

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft Probe Tube, 7.5 Fr

6

Female

- Working channel: 3.6 Fr - Angle of deflection: -285 degrees; +285 degrees - Resolution: 400 x 400 pixels - Field of view: 120 degrees - Sight line: 0 degrees - Range: 3 - 50 mm - Working length: 650mm - Width of the insert: 7.5 Fr - Maximum reach of the extension: 7.5 Fr - Features 2 adjustment buttons - Includes a self-locking mechanism

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ureteral holder

16

Female

* Supported for establishing a pathway during minimally invasive urological surgery – Length: 20 - 55 cm – Sizes: 10Fr - 14Fr.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The bracket is both smoking and suction in soft screening surgery

16

Female

* Construction: + Straight or slightly curved tip for access to the ureter + Two transparent channels with a 45-degree offset angle, combined with a pressure adjustment hole that can be opened and closed, facilitating easy stone removal. + The inner layer is made of 4 layers of PTFE, ensuring safe and smooth navigation of the endoscope. + The outer layer is coated with a water-repellent material, making it easy to place the sheath without damaging the ureter. + The sheath is reinforced with stainless steel springs, ensuring durability and resistance to compression during placement. The kit includes: 1 sheath, 1 guide wire, 1 sealing cap, 1 silicone tube, 1 140ml stone collection container. Sizes: 10/11/12/13/14 French Fr. Length: 13/26/36/40/46/50/55cm * Expiry date: 60 months * Single-use sterilization - Supplied with compatible pump and suction device for use

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Guide wire, diameter 0.035 inches, length 150 cm

12

Female

Guide wire, diameter 0.035 inches, length 150 cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Cutting ring-shaped electrodes for 120mm, 24Fr cystoscope

2

Female

Cutting loop electrodes for 120 and 24 Fr cystoscopes. Used for cutting and cauterizing during endoscopic prostatectomy.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

24-28 Fr cutting wire electrode

2

Female

24-28 Fr. roller-shaped cutting electrode. Used for cutting and cauterizing during minimally invasive prostate gland removal surgery.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Stone retrieval basket, 3 Fr size, length ≥ 90 cm

20

Female

Used for removing kidney stones. Size: 3Fr, length ≥ 90cm. Material: Nitinol. Technical specifications: 4 helical-shaped blue wires, white handle with three fingers that can be detached and reused. Length of the grasping channel: 30mm (adjustable to 15mm), with a barcode printed on the product packaging.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Stone removal tool, size 2.5 Fr, length 120 cm

12

Female

* Size: 2.5Fr * Bore diameter: 15mm * Bore opening: ≥24mm * Length: 120cm, with 4 wires * Material: Nitinol * Flexible, detachable handle design for easy one-handed operation * Shelf life: 60 months

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Stonespoon (for collecting urine stones), size 2.2 Fr, length 120 cm

2

Female

* Size: 2.2Fr * Catheter diameter: 10mm * Catheter opening: 18mm * Length: 120cm (4-wire type) * Material: Nitinol * Flexible, detachable handle design for easy one-handed operation * Shelf life: 60 months

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Urine Collection Funnel, size 1.9 Fr, length 130 cm

2

Female

* Size: 1.9 Fr, Type 4 wire * Length: 1300mm * Inner diameter: ≥8mm * Material: Anti-torsion Nitinol * Single-use sterilization

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Urine catheter guide wire – PTFE

20

Female

- Sizes: 0.032", 0.035", 0.038" - Length: ≤150cm - Material: Stainless steel with PTFE coating to reduce friction - Rigid, straight head design - Shelf life: 60 months - Packaged individually, sterilized by Ethylene Oxide (EO)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Urethral guide wire – hydrophilic

20

Female

- Sizes: 0.032", 0.035", 0.038" - Length: ≤150cm - Material: Nitinol core with anti-torsion properties, hydrophilic coating - Flexible design with straight and soft tip - Shelf life: 60 months - Packaged individually, sterilized by Ethylene Oxide (EO)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ureteral guide wire – HybriGlide

20

Female

- Size: 0.032", 0.035" - Length: ≤150cm - Material: Nitinol coated with PTFE, hydrophilic tip - Tip: Straight, soft - Design: Gold and black stripes running along the tube body for easy visualization on X-rays - Shelf life: 60 months - Packaged individually, sterilized by Ethylene Oxide (EO)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Back support brace (XS, S, M, L, XL, XXL)

100

Female

Made from sponge padding, cotton fabric, aluminum alloy support bars, and adhesive pads. The product consists of a two-layer fabric design, with the inner layer being made of cotton, featuring at least four large support bars that are curved to follow the body's contours from shoulder to hip, and smaller, flexible support bars arranged around the sides and abdomen to provide support. The adhesive pads ensure a snug fit against the body, making it easy to assemble and disassemble. Available in heights ranging from 135-145cm, ≤ 155cm, 155-165cm, 165 - 175cm, and >175cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Back support bra (sizes XS, S, M, L, XL, XXL)

10

Female

The product is made from foam padding, cotton fabric, non-woven fabric, breathable fabric, and multiple aluminum alloy support bars that are shaped to fit the body's curves and can be adjusted for optimal back support. It also features two thick elastic straps on both sides that provide a secure fit around the waist. This helps stabilize the lower back, reduce pressure, alleviate acute lower back pain caused by disc displacement, vertebral compression, and spinal instability.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Back support bra (sizes S, M, L)

10

Female

The product features an aluminum alloy frame that closely conforms to the hips and lower back, covered by cotton fabric. Two parallel aluminum alloy bars connect the product, creating a convenient opening for cleaning wounds after surgery. It helps support the upper body after injuries or spinal surgeries that are difficult or unsuccessful. It also assists in stabilizing and reducing pressure on the lumbar region, as well as providing relief from spinal injuries, disc herniation, vertebral compression fractures, and multiple lower back issues. Available in sizes S, M, L, and XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Abdominal support belt (sizes S, M, L)

10

Female

Made from self-adhesive neoprene material, breathable elastic fabric, and Velcro closures. The breathable elastic fabric provides support with its stretch, while the ends are connected using Velcro. Suitable for post-operative use, abdominal muscle strain, abdominal stretching, and sagging stomachs. Available in sizes S, M, L, XL, XXL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Belt Buckle - H1 (Sizes S, M, L)

200

Female

Made from cotton fabric, non-woven fabric, breathable fabric, foam padding, support strips, and Velcro straps. The product, with a height of 27cm, features evenly distributed foam padding, cotton fabric, and a support strip system in the waist area. Wide Velcro closures provide ease of use and increased front stability, while two elastic bands on both sides enhance the product's fixation. It provides stable support to reduce pressure on the lower back, alleviate acute lower back pain, treat spinal degeneration in the lumbar region, correct slipped or herniated discs, and aid recovery after lumbar spine surgery. Available in sizes S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

High-end belt buckle – Olumba (S M L)

200

Female

Made from elastic splint and elastic. The 22cm high product is a combination of an elastic splint system bent according to the body's curves and elastic material. There are two elastic bands on both sides that tighten the product to the waist area. The product is used to prevent damage to the lumbosacral spine in high-risk subjects such as: the elderly, people being treated for osteoporosis, people who have to stand or sit for too long at work, degenerative arthritis of the spinal joints, and lumbosacral spine injuries (as prescribed by the treating doctor). Support after surgery, after wearing lumbar spine straightener. Includes at least sizes S, M, L, XL, XXL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Aluminum belt buckle (S M L XL)

10

Female

The product consists of foam padding, cotton fabric, and a support system arranged evenly in the lumbar region. Wide Velcro straps provide easy use and increased stiffness at the front, while two elastic bands on either side enhance the product's stability. It provides stable support and reduces pressure on the lower back.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Rib cage support (sizes S, M, L)

10

Female

Made from cotton fabric, foam padding, and adhesive felt. The foam padding and outer fabric layer can be attached to all sides of the rib cage area, providing support and stabilizing fractured or bruised ribs, as well as supporting intercostal muscle strains.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Sizes available: 8 (XS, S, M, L, XL, XXL)

200

Female

Made from foam padding, cotton fabric, straps, and a shaped adhesive pad designed to fit around the clavicle and armpit area. It is used to stabilize fractures of the clavicle, dislocations of the clavicle, shoulder, and humerus-clavicle joint.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Wrist tape

10

Female

Made from self-adhesive Neoprene material, adhesive (velcro closure). High elastic elastic material and adjustable adhesive system for easy use. Wrist elastic bandage gently supports the wrist joint.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Elbow tape

10

Female

Made from self-adhesive neoprene material, adhesive (velcro closure). Made from highly elastic elastic material and the adhesive system can be adjusted for easy use. Elastic elbow bandages provide support in cases of sprains, muscle strains, and elbow arthritis. Special knit design focuses force on the elbow area. The product does not slide or bunch to help blood circulate

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Shoulder support brace (sizes S, M, L, XL, XXL)

200

Female

Made from breathable foam padding, cotton fabric, non-woven fabric, breathable mesh fabric, and a Velcro strap system for secure fixation and stabilization of the shoulder joint during treatment. Available in sizes ranging from XXS to XXL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

H1-shaped shoulder support brace (S, M, L, XL, XXL sizes)

10

Female

Made from cotton fabric, knitted fabric, breathable mesh fabric, foam padding, and adhesive bandages. It consists of two parts: a foam pad and a pouch-shaped design. The foam pad helps to keep the hand in a fixed position relative to the body, while the remaining part provides support for the hand in the treatment position. The product is designed to strengthen shoulder muscles, stretch ligaments around the shoulder joint due to dislocation, injury to the rotator cuff area, and after shoulder surgery. Available in sizes M, L, XL (minimum).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Large-sized forearm splint

10

Female

Made from waterproof fabric, foam padding, self-adhesive fabric, and an aluminum support that is bonded together, these flexible bandages can be easily attached to any position and are ideal for providing first aid to the forearm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Small-sized forearm splint

10

Female

Made from waterproof fabric, foam padding, self-adhesive fabric, and an aluminum support that is bonded together, these flexible bandages are waterproof when used and can be attached to any position for first aid on the forearm. Dimensions approximately 22 x 36 cm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Humerus support brace (sizes S, M, L, XL, XXL)

20

Female

The product is made from self-adhesive materials, foam, cotton fabric, adhesive tape (velcro), shaped aluminum alloy splints and elastic splints to create stability for the product. The product helps immobilize injuries such as fractures, sprains, forearms, wrists and hands. First aid for injuries to bones, joints, and fascia of the forearm and wrist. Supports fixation after fractures of the lower end of the radius, ulna, and potocol. Includes at least sizes XXS, XS, S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Humerus splint (sizes S, M, L, XL)

30

Female

Made from aluminum alloy strips, foam padding, self-adhesive fabric, and adhesive tape. The large aluminum alloy strip is molded to fit the treatment position, conforming to the palm and forearm, while the two supporting braces provide support for the forearm, combined with foam padding, self-adhesive fabric, and adhesive tape, creating a secure fit for the product. Available in sizes S, M, and L.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

H3 arm brace (sizes S, M, L, XL, XXL)

40

Female

Made from aluminum alloy splints, small splints, cotton fabric, knitted fabric, non-woven fabric, fabric with breathable holes and velcro. The aluminum alloy splint is long from near the hand to near the armpit, can be bent according to the treatment position, small splints help enhance fixation. The product fixes the lower 1/3 of the arm, forearm bones and elbow joints. Includes at least sizes XS, S, M, L, XL, XXL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hand wrist support - H1 (Sizes S, M, L, XL)

22

Female

Made from foam padding, cotton fabric, non-woven fabric, breathable mesh fabric, and a support system with Velcro straps. The support system consists of one large, rigid support bar and two flexible support bars that help straighten the wrist and forearm. The product helps to stabilize the wrist, forearm, and hand joints. Used for first aid, immobilizing fractured or dislocated bones, and treating sprains of the wrist and hand. Also used to provide post-operative or injury support for the wrist area. Suitable for chronic wrist joint inflammation. Available in sizes XS, S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Hard cervical collar (sizes S, M, L, XS, XL)

10

Female

Hard neck brace supports after cervical spine surgery, first aid for cervical spine injuries. - Material: Ethylene Vinyl Acetate foam - Structure: consists of 2 separate pieces attached together by adhesive tape, with small holes for ventilation when used. Includes at least sizes XXS, XS, S, M, L.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Neck brace (sizes S, M, L, XS)

10

Female

The product is made from high density foam material, soft, light and sticky. Consists of 2 separate pieces, the front piece is attached with a plastic mold, has a wide hole for inserting an endotracheal tube, the back piece is attached with a plastic splint to enhance the stability of the product, the 2 pieces are attached together by adhesive tape to help stabilize the cervical spine, the product has small holes for ventilation when used. Includes at least sizes S, M, L.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Soft cervical support brace (sizes XXS, XS, S, M, L, X-Small, Small, Medium, Large, Extra Large, Extra Extra Large)

4

Female

Made from foam padding and cotton fabric, velcro closure. The product is designed according to the measurements of the necklace in many sizes to help gently fix and limit movement of the cervical vertebrae. Includes at least sizes XXS, XS, S, M, L, XL

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Wrist support - H1 (Sizes S, M, L, XL, XXL)

12

Female

Made from cotton fabric, non-woven fabric, and breathable fabric. Features a Velcro closure and an aluminum alloy support strip. Made with self-adhesive materials. The adjustable aluminum alloy support strip can be bent to fit the wrist's curve and is designed for various hand sizes. Provides support and stabilization of joints after surgery or injury in the wrist area. Available in sizes S, M, L, and XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Wrist support with elastic band (sizes S, M, L, XL, XXL)

16

Female

Made from stretchy elastic fabric and aluminum alloy supports. The aluminum alloy support is curved to fit the palm and wrist, while the thick elastic provides good tension and a non-slip surface to secure the product to the hand. Available in sizes XS, S, M, L, and XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Colles' fracture

10

Female

The splint is made of aluminum alloy and lined with a layer of foam padding. The design conforms to the anatomy of the arm and hand. The splint is designed to fit the shape of the arm and hand in all positions. Ventilation holes provide airflow for the patient. The splint is used to support and immobilize the forearm before surgery, for injuries to the wrist, dislocations, and sprains.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Large-sized wing support brace

10

Female

Made from waterproof fabric, foam padding, self-adhesive fabric, and an aluminum support strip that is bonded together, these flexible bandages can be easily attached to any position and are ideal for providing first aid to the arm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Small-sized wing brace

10

Female

This is an orthopedic support made from waterproof fabric, foam padding, self-adhesive material, and aluminum splints that are joined together. When used, the flexible adhesive strips can be attached to any position for use in providing first aid to the arm.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Index finger splint (sizes S, M, L, XL, XXL)

16

Female

Made from support bars, foam padding, and cotton fabric. The support bars are pre-shaped to fit comfortably around the thumb and palm, with cushioned and fabric-covered contact areas. Used to stabilize bones, joints in the wrist, hand, and thumb after surgery or injury. Available in sizes S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Left-hand hanging pouch (sizes S, M, L, XL)

20

Female

The product is made from breathable mesh fabric, straps and plastic buckles. The pocket-shaped design supports the arms, with a strap that wraps around the shoulders and neck to help support the arms. The bag has a lock to hold your thumb, a plastic lock system makes it easy to adjust and remove. Includes at least sizes XXS, XS, S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Knee support braces (sizes S/M and L/XL)

300

Female

Made from highly elastic elastic material, the adhesive system designed around the pillow makes the product easier to adjust, fits well, and is difficult to move, helping to limit movement during treatment. The open design in the hamstring area makes users feel comfortable when bending or stretching their knees. Especially effective in cases of common injuries to the kneecap and knee joint. Supports the knee joint during exercise, sports or after surgery. Includes at least sizes S/M; L/XL

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Ankle Support (Size S/M and L/XL)

50

Female

Made from self-adhesive Neoprene material, adhesive tape (velcro closure). Supports gentle ankle joint injuries. Used in cases of arthritis and ligament sprains. Includes at least sizes S/M; L/XL

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Baseball

18

Female

The product consists of a flexible aluminum bar and a layer of foam padding attached to the aluminum bar that has been designed to hug the entire finger, helping to fix it beyond the bone.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

H1 leg brace (S, M, L)

10

Female

Made from aluminum alloy strips, small support bars, and cotton fabric. The product combines anti-rotation supports and knee supports to securely fix the entire leg during treatment.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Short rotation splint, H1 (S, M, L)

76

Female

Made from aluminum alloy plate, cotton fabric and adhesive tape (velcro). The shaped aluminum alloy splint bends according to the curvature of the foot and leg combined with a special aluminum alloy splint, good strength, horizontal rotation to prevent rotation. The product is covered by foam padding and cotton fabric, fixed to the foot by an adhesive tape system. The product helps fix and stabilize the ankle joint after injury, after surgery, and prevents rotation in the lying position of the injured leg. Includes at least sizes S, M, L.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Long spinal brace, H2 (S, M, L)

20

Female

Made from aluminum alloy brace, cotton fabric, non-woven fabric, breathable fabric, tricot fabric and adhesive tape (velcro). The shaped aluminum alloy splint bends according to the curvature of the foot and leg combined with a high-strength aluminum alloy splint that prevents rotation and keeps the knee straight. The adhesive tape system helps fix the foot to the product. Immobilize the ankle after injury, after surgery, and prevent rotation in the lying position of the injured leg. Includes at least sizes S, M, L, XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Long night splint H2

6

Female

Made from aluminum alloy brace shaped to follow the curvature of the foot and leg, the product is covered with foam cushion, cotton fabric and a velcro locking system to help fix the foot. Used for patients with a foot size of size L. Used to support bone and joint injuries in the ankle and foot areas, ankle arthritis, damage to ligaments and fascia in the ankle and foot areas, fractures of the inner ankle and outer ankle of the lower leg bones. Supports some injuries in the area above the ankle

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Short night splint H1

100

Female

The brace is made from aluminum alloy, foam padding, cotton fabric, non-woven fabric and velcro. The shaped aluminum alloy splint bends according to the curvature of the foot and lower leg. The product is covered with foam padding, cotton fabric and a velcro locking system to help stabilize the foot. Used for patients with foot sizes XS, S, M

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

H2 knee support (40, 50, 60 cm)

12

Female

Made from aluminum alloy strips, PU foam, self-adhesive material, cotton fabric, and Velcro straps. The product is assembled from three different pieces, each consisting of shaped aluminum alloy strips, a foam pad, and self-adhesive fabric. The middle piece has two strips, while the remaining two have one strip each. The pieces are connected using adjustable adhesive tape.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Large thigh support

5

Female

Large leg brace: Made from waterproof fabric, foam padding, self-adhesive fabric, and an aluminum frame that is bonded together. When used, it provides a waterproof barrier and can be secured in any position using adhesive tape. Suitable for initial treatment of leg injuries.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Small thigh brace

5

Female

Made from waterproof fabric, foam padding, self-adhesive fabric, and an aluminum brace that is bonded together, this product is waterproof when used and can be securely attached to any position using adhesive tape. It is suitable for first aid on the foot.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

H3 knee support available in lengths of 40cm, 50cm, 60cm, and 70cm.

200

Female

The product consists of 4 shaped aluminum alloy support bars, two of which are adjustable and mobile, with fabric, PU foam, cotton fabric, and a Velcro strap system that interlocks to securely hold the area around the knee, thigh, and lower leg. The product's length is available in sizes of 40cm, 50cm, 60cm, and 70cm. It includes minimum sizes S, M, L, and XL.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

2-hole faceplate, short bridge for 2.0mm screws

5

Female

Mini 2-hole spacer, short bridge, suitable for 2.0mm cross-head screws; 1.0mm thick. Bright white color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

4 -hole straight face splint for 2.0mm screws

5

Female

4-hole straight faceplate, suitable for 2.0mm cross-head screws; 1.0mm thick. Original titanium color. Titanium grade 3 TS-3-2 (ASTM-F67 standard) – Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

4-hole faceplate, short bridge for 2.0mm screws

10

Female

4-hole faceplate, short bridge for 2.0mm cross-head screws; 1.0mm thick. Bright white color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

4-hole faceplate, long bridge for 2.0mm screws

10

Female

4-hole faceplate, long bridge for use with 2.0mm cross-head screws; 1.0mm thick. Bright white color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6 -hole straight face splint for 2.0mm screws

10

Female

Straight faceplate with 6 holes for 2.0mm screws; 1.0mm thick; Original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard) – Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6-hole face plate, long bridging for 2.0mm screws

10

Female

6-hole faceplate, 2.0mm screw bridge; 1.0mm thick; bright white color. Grade 3 titanium (ASTM-F67 standard). – Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

8-hole straight face brace for 2.0mm screws

10

Female

Straight faceplate with 8 holes for 2.0mm screws; 1.0mm thick; Original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard) – Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

16-hole straight face brace for 2.0mm screws

10

Female

Straight faceplate with 16 holes for 2.0mm screws; 1.0mm thick; Original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard) – Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

20-hole straight faceplate for 2.0mm screws

10

Female

Straight faceplate with 20 holes for 2.0mm screws; 1.0mm thick; Original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard) – Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Mini "L" shaped splint (left/right), short and long bridging pieces, 4 holes for 2.0mm screws.

10

Female

Left-hand L-shaped plate, right-hand L-shaped plate, short bridge with 4 holes for 2.0mm screws; 1.0mm thick; Original gray color. Titanium grade 3 TS-3-2 (ASTM-F67 standard).

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight lower arch with 4 holes, short bridge for 2.3mm screws.

16

Female

4-hole straight arch, short bridge for 2.3mm screws; original gray color, 1.5mm thick arch; Titanium grade 3 TS-3-2 (ASTM-F67 standard)

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight under-jaw plate with 4 holes for a 2.3mm screw.

10

Female

Long bridge maxi support with 4 holes, using 2.3mm cross-shaped screws; gray color, 1.5mm thick support; original gray color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Underslung jaw plate with 6 holes for 2.3mm screws

10

Female

6-hole straight maxi support bar, uses 2.3mm cross-head screws; original gray color, 1.5mm thick support bar; Titanium grade 3 TS-3-2 (ASTM-F67 standard) - Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Underslung arch with 6 holes for 2.3mm screws

10

Female

Long bridge maxi support with 6 holes, using 2.3mm cross-head screws; gray color, 1.5mm thick support; original gray color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight jaw plate with 8 holes for 2.3mm screws

10

Female

Long maxi support bar with 8 holes, using 2.3mm cross-head screws; gray color, 1.5mm thick; original gray color. Titanium grade 3 TS-3-2 (ASTM-F67 standard). - Includes compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight jaw plate with 16 holes; screw size 2.3mm

10

Female

16-hole maxi screw, compatible with cross-head screws, size 2.3mm; thickness 1.5mm; titanium grade 3 TS-3-2 (ASTM-F67 standard); - Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

6 -hole C -shaped face splint for 2.0mm screws

5

Female

C-shaped staple with 6 holes for 2.0mm cross-head screws; 1.0mm thick; Original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard). – Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

8 -hole C -shaped splint for 2.0mm screws

3

Female

C-shaped staple with 8 holes for 2.0mm cross-head screws; 1.0mm thick; original gray color, titanium grade 3 TS-3-2 (ASTM-F67 standard). – Provides compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Mini screw 2.0, Taro self

670

Female

Cross-head screws, 2.0mm diameter, lengths of 5, 6, 7, 8, 9, 10, 11, 13, 15, 17 mm - manufactured by Taro; made from titanium alloy Ti-6Al-4V (ASTM-F136 standard); bright white color - Supplied with compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

2.3mm diameter Maxi screw

350

Female

Cross-head screws, 2.3mm diameter, lengths of 5, 7, 9, 11, 13, and 15mm – Self-tapping; material: Titanium alloy Ti-6Al-4V (ASTM-F136 standard); bright white color – Supplied with compatible accessories.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

16-hole straight cranial brace using 1.5mm screws

3

Female

Material: 6Al4V ELI titanium alloy – Dimensions: Length 63mm, thickness 0.6mm, hole diameter 1.65mm, body width 1.19mm, spacing between holes 3.98mm. Includes 16 screw holes, designed to be used with 1.5mm self-tapping, self-drilling screws. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

16-hole straight skull plate with 1.9mm screws

3

Female

Material: 6Al4V ELI titanium alloy – Dimensions: Length 86mm, thickness 0.6mm, hole diameter 2.20mm, body width 1.52mm, spacing between holes 5.46mm. Includes 16 screw holes, designed to be used with 1.9mm self-tapping and self-drilling screws. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Two-hole compression slide fastener with 1.9mm screws

3

Female

Material: 6Al4V ELI titanium alloy - Dimensions: Length 15mm, thickness 0.6mm, screw hole diameter 2.20mm, body width 1.87mm, spacing between screw holes 8.66mm. Includes 2 screw holes, designed to be used with 1.9mm self-tapping, self-drilling screws. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

2-hole compression slide fastener with 1.5mm screws

3

Female

Material: 6Al4V ELI titanium alloy – Dimensions: Length 14mm, thickness 0.6mm, screw hole diameter 1.65mm, body width 1.77mm, spacing between screw holes 8.66mm. Includes 2 screw holes, designed to be used with 1.5mm self-tapping and self-drilling screws. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Round fan-shaped cranial brace set includes 1 brace and 6 1.5mm screws

3

Set

The round-shaped skull brace consists of 1 brace and 6 screws. * Material: 6Al4V ELI titanium alloy * Brace thickness: 0.60mm, screw hole diameter: 1.65mm, width: 24.13mm, with 6 opposing, matching holes for use with 1.5mm screws. * Screw specifications: Diameter: 1.5mm, length: 4mm. Self-drilling and tapping screws, screw head diameter: 2.48mm, screw head height: 0.99mm. Square screw head. * The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Straight cranial brace set includes 3 braces and 6 1.5mm screws

3

Set

The skull brace consists of 3 bars and 6 screws. - Material: 6Al4V ELI titanium alloy - Bars: 2 straight bars, 14mm long, 0.60mm thick, with a screw hole diameter of 1.65mm, a bar width of 1.77mm, and a screw spacing of 10.16mm. Compatible with screws having a 1.5mm diameter. - Screws: 1.5mm diameter, 4mm long. Self-drilling and self-tapping screws, with a screw head diameter of 2.48mm and a screw head height of 0.99mm. Square screw heads. - The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

X-shaped cranial brace set includes 1 brace and 6 1.5mm screws

3

Set

The X-shaped skull brace consists of 1 brace and 6 screws. Material: 6Al4V ELI titanium alloy. Brace dimensions: 17mm long, 0.60mm thick, with a screw hole diameter of 1.65mm, and a brace body width of 1.19mm. The braces are designed to be used together with screws that have a 1.5mm diameter. Screw specifications: Diameter: 1.5mm, Length: 4mm. These are self-drilling and self-tapping screws with a screw head diameter of 2.48mm and a screw head height of 0.99mm. The screws feature a square drive. The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Square cranial brace set includes 1 brace and 4 1.5mm screws

2

Set

The skull brace consists of one plate and four screws. - Material: 6Al4V ELI titanium alloy - Plate shape: Square, length 10mm, width 10mm, plate thickness 0.60mm, screw hole diameter 1.65mm, screw spacing 7.01mm (synchronized with 1.5mm diameter screws) - Screws: Diameter 1.5mm, length 4mm. Self-drilling and self-tapping screws, screw head diameter 2.48mm, screw head height 0.99mm. Square screw heads - Product packaged in a sterile box

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The skull brace consists of three bars and six 1.9mm screws.

2

Set

The straight skull brace consists of 3 plates and 6 screws. – Material: 6Al4V ELI titanium alloy – Straight plate with 2 holes. Length: 15mm, thickness: 0.6mm, screw hole diameter: 2.20mm, plate body width: 1.98mm, screw hole spacing: 10.16mm, designed to be used together with 1.9mm diameter screws – Screw specifications: Diameter: 1.9mm, Length: 4mm. Self-drilling and self-tapping screw type, screw head diameter: 2.99mm, screw head height: 1.01mm. Square screw head – The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The skull brace consists of one plate and six 1.9mm screws.

2

Set

The X-shaped skull brace consists of 1 brace and 6 screws. Material: 6Al4V ELI titanium alloy. Brace dimensions: 18mm long, 0.60mm thick, with a screw hole diameter of 2.20mm, and a brace body width of 1.52mm. The braces are designed to be used together with screws that have a 1.9mm diameter. Screw specifications: Diameter: 1.9mm, Length: 4mm. These are self-drilling and tapping screws with a screw head diameter of 2.48mm and a screw head height of 0.99mm. Square screw heads. The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

The round skull brace consists of one brace and six 1.9mm screws.

2

Set

The round-shaped skull brace consists of 1 brace and 6 screws. Material: 6Al4V ELI titanium alloy Brace thickness: 0.60mm, screw hole diameter: 2.20mm, width: 25.06mm, with 6 opposing, matching screw holes for use with 1.9mm diameter screws. Screw specifications: Diameter: 1.9mm, Length: 4mm. Self-drilling and tapping screws, head diameter: 2.99mm, head height: 1.01mm. Square screw head. The product is packaged in a sterile box.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Self-drilling and self-drilling microcraniotomy set, 1.5mm diameter

54

Female

Self-tapping and self-drilling screw: 6Al4V ELI titanium alloy - Diameter: 1.5mm, Length: 3/4/5mm, Screw diameter: 1.5mm, Screw head height: 0.99mm. Square screw head - Compatible with plates and skull caps

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Self-drilling and self-drilling microcraniotomy set, diameter 1.9 mm

54

Female

Self-tapping screw, material: 6Al4V ELI titanium alloy - Diameter: 1.9 mm, length: 3/4/5/6 mm, screw head diameter: 2.99 mm, screw head height: 1.01 mm. Square screw head - Compatible with splints and skull pads.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

36 x 52mm cranial mesh

3

Female

Material: 6Al4V ELI titanium alloy - Dimensions: Length 36mm, width 52mm, thickness 0.6mm, compatible with screws of diameter 1.5mm or 1.9mm self-tapping and self-drilling screws. Square head screw.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Skull patch mesh 65 x 65mm

2

Pieces

Material: 6Al4V ELI titanium alloy - Dimensions: 65mm long, 65mm wide, 0.6mm thick, compatible with screws of 1.5mm and 1.9mm diameter (self-tapping screw type). Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

90 x 92mm skull repair mesh

2

Female

Material: 6Al4V ELI titanium alloy - Dimensions: 90mm (length), 92mm (width), 0.6mm (thickness). Compatible with screws having a diameter of 1.5mm or 1.9mm, self-tapping and self-drilling screw types. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

127 x 131 mm skull repair mesh

2

Female

Material: 6Al4V ELI titanium alloy - Dimensions: 127mm (length), 131mm (width), 0.6mm (thickness). Compatible with screws of diameter 1.5mm or 1.9mm, self-tapping and self-drilling screws. Square head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Skull patch mesh 150 x 150mm

2

Pieces

Material: 6Al4V ELI titanium alloy - Dimensions: 150mm (length), 150mm (width), 0.6mm (thickness). Compatible with 1.5mm and 1.9mm self-tapping screws. Square screw head.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Skull patch mesh 200 x 200mm

2

Female

Material: 6Al4V ELI titanium alloy - Dimensions: 200mm (length), 200mm (width), 0.6mm (thickness). Compatible with 1.5mm and 1.9mm self-tapping screws. Square head screw.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

3x4 cm self-healing hard coating patch

2

Female

Biomaterial derived from bovine pericardium, with cell-removed type I collagen structure and approximately 2 μm pore size microstructures. Haiao biomembrane: Cell-removed bovine dermal scaffold with approximately 15 μm pore size. Tianxinfu collagen sponge: Type I collagen sponge with 50–500 μm pore size – The product has a unique and dense microstructure (approximately 0.4 mm thickness) – Size: 3x4 cm – Integrates and regenerates into autologous tissue within approximately 3 months.

Military Medical Hospital 17 - Department of Logistics - Military Technology 5

Self-adhesive 4x6 cm hard plastic patch