Procurement of digital diagnostic X-ray system

Diagnostic digital X-ray system

1

System

Main Unit General Requirements: - Equipment manufactured in 2026 or later, 100% new - Manufacturer meets quality management standards: ISO 13485, CE or FDA - Main unit manufactured in OECD countries - Power supply: 3-phase 380 VAC, 50/60Hz - Operating environment: + Maximum temperature: ≥ 30ºC + Maximum humidity: ≥ 70% Configuration Requirements: - High-voltage generator: 1 unit - X-ray tube: 1 unit - Tube carrier column: 1 unit - Beam collimator: 1 unit - Examination table: 1 unit - Chest X-ray stand: 1 unit - Digital X-ray image receiver: 1 unit - Digital image processing and control station: 1 unit - Image processing software: 1 unit - English and Vietnamese user manuals: 1 set Specifications Technical specifications: High-voltage generator - Output power: ≥ 50 kW - Output frequency: ≥ 500 kHz - kV range: Minimum 40 kV - 150 kV - mA range: ≤ 10 mA - ≥ 800 mA - mAs range: ≤ 0.1 mAs - ≥ 800 mAs - Imaging time range: 0.001 seconds - ≥ 0.6 seconds - Anatomical programs (APR): ≥ 1290 programs - Control panel: LCD or equivalent - Control of at least 4 imaging parameters: KV, mA, mAs/time. X-ray Tube - Rotating anode tube, rotation speed ≥2,700 rpm - Number of focal points: 2, small focal point size 0.6 mm, large focal point size 1.2 mm - Maximum voltage 150 kVp - Anode heat storage: ≥ 300 kHU - Tube head heat storage: 1250 kHU Floor-mounted tube support column - Manual or electric movement, vertical and horizontal movement - Distance from focal center to floor ≥ 1500 mm - Tube support column rotation range ± 180°, with stops at all points between -90° and +90° - Tube head inward and outward movement range ≥ 26 cm - Movement along floor rail range ≥ 190 cm - Tube rotation angle around column: ± 180°, with stops at all points between -90° and +90° +90° - Magnetic lock - Ball holder control: controls vertical and horizontal movement, with a button to lock ball rotation. Beam collimator - Manual or electrically actuated - Filter equivalent to ≥ 1.2 mm Al - Light source intensity 160 ~ 280 Lux at SID 100 cm - Automatic shut-off in 30 seconds - Maximum field of view: 48 x 48 cm or more at SID 100 cm X-ray table - Floating X-ray table, 4-way movable tabletop - Filter: 0.8 mm Al at 100kvp - Vertical movement: ≥± 400mm - Horizontal movement: ≥300mm - Bucky movement: ≥400mm - Tabletop load capacity ≥ 250 kg - Tabletop dimensions: 800 mm x 2200 mm - Electromagnetic brake - Tabletop height 690 mm - Filter mesh ratio: 10:1, 103 L/inch mesh oscillation Chest X-ray price: - Ratio Filter ratio: 10:1, 103 L/inch - Counterbalanced. - Distance from the center of the detector frame to the floor: 400mm - ≥1890mm - Electromagnetic brake - Bucky tilt: -15°~+90° Direct Diagnostic (DR) Flat Panel Detector: - Type: TFT a-Si - Luminous material: CsI - Resolution: ≥ 3.5 lp/mm - Pixel size: ≤ 140 μm - Active pixel matrix: 3072x3072 pixels or more - Active size: 430.08×430.08 mm or more - Panel weight: ≤3.7 kg - A/D conversion: ≥16 bit - Communication method: Wireless and Wired - Automatic beam detection: Yes - Cycle time: 4.5 seconds (Wired mode) / 5 seconds (Wireless mode) - Image transmission time: 1.5 seconds (Wired mode) (Wireless mode) / 2.5 seconds (Wireless mode) - Automatic image saving on the plate: Up to 200 images - Maximum load capacity on the entire plate surface: 400 kg - Maximum load capacity at a single point: 200 kg - IP68 dust and water resistance technology. - Battery life: 300 shots in 7.5 hours - Hot swap battery replacement without turning off the power - Image acquisition and processing station (Purchased in Vietnam): - Processor: Intel Core i5 or higher - RAM: 8 GB - Hard drive: 500 GB - Windows: Win 10 or higher - Screen resolution: 1920 x 1080, full HD - Digital image acquisition and processing software: + Search and view patient information. + Add/Edit/Delete patient information. + Emergency registration mode - Supports task list through integration with hospital information systems + Change image orientation (rotate, flip vertical/horizontal) + Automatic ROI size adjustment + Pause - Zoom in/out. - Add text. - Shutter. - Mark. - Negative. - Distance measurement - Angle measurement - Image merging - Transfer images to PACS. - Exposure Index - Rejection/Re-capture - Film Printer Connection Accessories, supplies, and synchronized items as required by the manufacturer for system installation and operation: - Including all accessories, supplies, components, connecting cables, connectors, brackets, power supplies, protective devices, software, user licenses (if any), installation materials, consumables for initial installation, items connecting to existing infrastructure, system configuration, calibration, testing (if the responsibility of the supplier), commissioning, acceptance testing, and other necessary items as recommended or required by the manufacturer to ensure the system operates synchronously, stably, and fully meets the required configuration functions.

Chau Doc General Hospital, 917 Ton Duc Thang, Chau Doc Ward, An Giang Province

+ 100% new goods; + Quote with warranty period for the product; + Estimated time of delivery of goods after contractor selection results are available; + The quoted price includes the entire system and requirements according to the list to put the machine into operation