Purchase rehabilitation equipment

Ultrasound therapy machine (with electric pulse combination)

2

Female

I. General requirements: - Meets quality standards (main machine): ISO 13485 or equivalent. II. Requirements for supply: - Main machine combined with touch screen ≥ 06 inches: 01 piece - Pulse electric module combined with suction cup: 01 built-in set - Multi-frequency ultrasound module: 01 built-in set - Suction cup accessories: 01 set - Trolley: 01 piece - Multi-frequency ultrasound generator: 01 piece - Pulse wire and electrode accessories: 01 set III. Technical feature requirements * Ultrasound module: - Frequency: 01- 03Mhz - Broadcast: Continuous and pulsed (from ≤ 20 to ≥ 80%) - Frequency adjustment: ≤ 01 to ≥ 200 Hz - Multi-frequency head ≥ 05 cm2 can be used separately or in combination - Maximum time: ≥ 30 minutes. - Maximum intensity: ≥ 03W/cm2. - There is a real-time warning of no contact between the patient's skin and the ultrasound probe. * Pulse power module: - Low frequency includes current types: Galvanic, intermittent galvanic, diadynamics (≤ 50- ≥ 100Hz, CP, LP, 50 and ≥100Hz intermittent). - Output: ≥ 02. - Maximum current: ≥ 76 mA. - Average frequencies include lines: IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF excitation, Kotz, IF horyzontal. - Output: ≥ 02. - Frequency: ≤ 02 Khz to ≥ 20 Khz. - There are preset programs with body images. - Has internal memory. - Have treatment goals. * Suction cup module: - Supplied together

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province

Short wave

1

Female

I. General requirements: - Meets quality standards (main machine): ISO 13485 or equivalent. II. Required configuration: - Main machine: 01 unit. - Head support arm: 02 pieces. - Electrode disc Ø 130mm: 02 pieces. - Wave ball: 01 piece. - Wave test light: 01 piece. III. Technical feature requirements - Protection level: 1 BF or equivalent. - Working frequency: ≥ 27.12 MHz. - Device adjustment: Automatic or equivalent. - Operating modes: Capacitive, resistive and touch. - Broadcast types: continuous and pulsed. - Pulse width: ≥ 380 microseconds. - Frequency adjustment range: from ≤ 20 to ≥ 200Hz. - Power: adjustable range from 0 to ≥ 470 W in continuous mode. - Maximum power: ≥ 1000W in pulse mode. - Time: 0 - ≥ 30 minutes. - LCD or touch screen liquid crystal display. - Programs: ≥ 20 pre-stored programs for common diseases.

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province

Paraffin tank

1

Female

I. General requirements: - Meets quality standards (main machine): ISO 13485 or equivalent. II. Required configuration: - Boiler body: 01 pc. - Paraffin available in pot: ≥ 04 Kg. III. Technical feature requirements - Material made from stainless steel. - Working temperature: Allows temperature adjustment up to ≥ 100o C. - Number of paraffin melting chambers: ≥ 01 chamber. - Paraffin melting chamber capacity: ≥ 30 liters.

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province

Laser therapy

1

Female

I. General requirements: - Meets quality standards (main machine): ISO 13485 or equivalent. - The main machine's origin is in one of the European Union (EU) countries or the Organization for Economic Cooperation and Development (OECD). II. Required configuration: - Main machine: 01 unit. - Transmitter: 01 piece. - Safety glasses: 01 piece. - Stroller: 01 piece. III. Technical feature requirements - Have at least the features of pain relief, anti-inflammation, and wound healing stimulation. - Has a touch screen displaying treatment parameters. - Has the function of automatically calculating the emitted energy based on set parameters. - Has the function to customize treatment parameters. - There are suggested regimens for common pathologies or there are pre-installed programs. - Maximum power ≥ 25 W for devices with ≥ 3 wavelengths or Maximum power ≥ 75 W for devices with combined 2-wavelength technology - Wavelength types ≥ 03 types of wavelengths or devices with combined 2-wavelength technology. - Wavelength range: ≤ 810 nm to ≥ 905 nm. - Has the function of controlling laser source radiation to not cause tissue burns or has a sensor to monitor skin temperature during treatment. - Minimum (or equivalent) modes include: Continuous mode, pulse mode. - Adjustable frequency range. - Maximum treatment area: ≥ 9 cm². - Meets IEC safety standards or equivalent

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province

The spine stretcher

1

Female

I. General requirements: - Meets quality standards (main machine): ISO 13485 or equivalent. II. Required configuration: - Main machine: 01 unit. - Touch screen ≥ 10 inches: 01 piece. - Emergency stop device: 01 piece. - Back and neck straps: 01 set. - Pulling head support bar with adjustable pulling angle: 01 piece. - Electric lifting table: 01 piece. III. Requirements for technical features * Continuous and progressive stretching: decompression therapy and indicated for the treatment of joint blocks. * Intermittent and cyclic stretching: Intermittent and cyclic stretching has a pull phase and a rest phase, allowing the muscle to work and rest to provide nutrition to the muscles and inflamed joints. * Neck traction: Typically, spinal traction is used to treat body axis. Serious pain diseases in the neck such as cervical vertebrae pain, brachial syndrome, etc. * Pulling the back and pulling the whole body: Pulling the back usually involves pulling the lower part of the body axis. In this case, the pulling force will be higher than pulling the neck. - Classification: 1B or equivalent. - Traction: electric traction for both back and neck modes. - Pull mode: continuous, intermittent, cyclic, static, progressive. - Maximum pulling force: neck pull ≥ 20kg, back pull ≥ 90kg. - Large number of pre-installed treatment programs. - User-installed program with different steps.

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province

Authorgish treatment machine

1

Female

I. General requirements: - Main machine origin is in one of the G7 or European countries. - Meets quality standards (main machine): ISO 13485 or equivalent. II. Requirements for supply: - Main machine: 01 piece - Treatment gel: 01 bottle - LAN connection port: 01 piece - Trolley: 01 piece - High-speed guide tube: 01 piece - Shock gun and connection wire: 01 piece - Specialized bullets made of HD ceramic: 01 piece - Integrated head size S - Ø12 mm: 01 piece - Integrated head size M - Ø15 mm: 01 piece - Integrated head size L - Ø20 mm: 01 piece III. Technical feature requirements - Shock type: Extracorporeal shock wave therapy. - Touch screen: ≥ 10 inches. - Number of shock waves: unlimited. - Air compressor pressure: ≥ 6.5 bar. - Energy density ≥ 0.58 mJ/mm2. - Maximum pulse frequency ≥ 25Hz. - Frequency adjustment step: 01 - ≥ 25. - Intensity adjustment step: 01 - ≥ 25. - Impact bullet structure: made of HD ceramic or equivalent ceramic coating. - Bullets are abrasion resistant and have a glossy ceramic surface. - Has reverse mode. - Has a wide-area focused broadcast mode. - Has an ergonomic operating structure. - There is a patient database. - There are indication suggestions. - Has Trigger-Point treatment. - Has linear mode. - Has pulse mode. - Has triangle mode.

An Giang General Hospital, Address: 60 Ung Van Khiem Street, Long Xuyen Ward, An Giang Province