Purchasing assets from the 2026 public service development fund

General digital X -ray machine

1

Machine

a. General requirements: - Year of manufacture: 2026 - Machine quality: 100% new, unused - Standard compliance: ISO 13485 - Power supply: 3-phase, 380V, 50/60Hz - Origin: + Main unit: Manufactured in a country belonging to the Organization for Economic Cooperation and Development (OECD). + Digital X-ray image receiver (FPD): Manufactured in a G7 country. + X-ray tube: Manufactured in a G7 country. - Operating environment: + Maximum temperature: ≥ 35oC + Maximum humidity: ≥ 70% b. Configuration: Digital X-ray system for general imaging, 2-sensor type, configuration includes: - X-ray machine with accessories including: + High-voltage generator: 1 unit + X-ray tube: 1 unit + Floor-mounted X-ray tube column: 1 set + Beam collimator: 1 unit + Patient table: 1 unit + Chest X-ray stand: 1 unit - Digital X-ray image receiver (FPD): 2 sets - Image acquisition and processing software: 1 set - Image receiver connection box: 2 units - Computer workstation: 1 set - 2 kVA Online UPS: 1 unit - X-ray warning light: 1 unit - English and Vietnamese user manual, English and Vietnamese maintenance manual: 1 set. Technical Specifications: * Digital High-Frequency X-ray Machine - High-Voltage Generator + Scanning Power: ≥ 50kW + Frequency: ≥ 60 kHz + Scanning Voltage: 40kV - 150kV + Scanning Current: ≥ 630mA + mA Range: 10 – 630mA + mAs Range: ≥ 630 mAs + Scanning Time: From 0.1ms – ≤ 10 seconds + Scanning Parameter Selection: By kV, mA, s, mAs + Preset Scanning Programs: ≥ 216 programs - X-ray Tube + Number of Focal Spots: 2 + Focal Size: - Small: ≤ 0.6 mm - Large: ≤ 1.2 mm + Anode Heat Resistance: ≥ 300 kHU. + Anode heat dissipation rate: ≥ 1226 HU/second. + Maximum voltage of the tube: ≥ 150 kV + Beam opening angle: ≤ 120° - Floor-mounted X-ray tube column + Simultaneous up/down and left/right movement sensor + LCD screen displaying SID distance and angle between the X-ray tube and the digital receiver + Tube travel distance along the vertical axis of the support column: ≥ 1500 mm + Lateral travel distance: ≥ 1860 mm + Vertical tube rotation angle: ± 180° + Horizontal tube rotation angle: ± 90° - Beam collimator + Manual field control + Illumination lamp: Halogen or LED type, brightness: ≥ 160 lux at SID 100 cm + Lamp auto-off time: ≥ 30 seconds + Minimum maximum field size: ≥ 43 cm x 43 cm The SID distance is 100cm. + Filter: Equivalent to: ≥ 1.5mmAl + Minimum aperture: ≤ 1 cm x 1 cm (SID 100 cm) - Patient table + Four-way movable type, with electromagnetic brake, controlled by foot pedal + Table surface with X-ray filter mesh with a ratio of: ≥ 215 lines/cm, ratio: ≥ 10:1 + Table height: ≥ 650mm + Distance from table surface to image sensor: ≥ 80mm + Horizontal travel range: ± ≥ 105mm + Vertical travel range: ± ≥ 500 mm + Minimum table size: ≥ 1890 x 800 mm + Minimum patient weight: ≥ 150 kg - Standing chest X-ray stand + Bucky stand for image sensors with dimensions from: 18 x 24 cm to ≥ 43 x 43cm. + Vertical movement: ≥ 1500 mm + Up/down control range: from 350 mm to ≥ 1850 mm. + Tabletop with X-ray filter: ≥ 215 lines, ratio: ≥ 10:1 + Motorized up/down movement + Uses electromagnetic brake * Digital X-ray image receiver (FPD) - Sensor material made of CsI or material with equivalent or better signal reception performance - Active area: ≥ 426 x 425 mm - Overall dimensions: ≥ 459 x 459 x 15 mm - Pixel matrix: ≥ 2800 x 3036 pixels - Resolution: ≥ 3.7 Lp/mm - Pixels: ≤ 140µm - A/D conversion: ≤ 16 bits - Weight: ≤ 4.3 kg * Image processing software - Software for image display and processing - Software for image stitching - Software for left-right marking - Functions Image rotation - Software for measuring dimensions and distances, measuring length and angles using freehand lines and displaying them on the screen - Digital image processing functions: image contrast; image rotation; image zooming; marking on film, * Image processing workstation - Processing, storing and sharing images - Processor: ≥ Intel Core i5 CPU or higher - Screen size: Medical monitor ≥ 27", resolution ≥ 8Mbps - Hard drive/storage: ≥ 1TB/ SSD: ≥ 256G - RAM: ≥ 16 GB - DVD/CR-ROM image recorder - Keyboard and mouse - Licensed Windows operating system * DICOM connection: - Minimum of the following functions: + DICOM Storage + DICOM Print + DICOM 3.0

Tu Son General Hospital

General ultrasound machine

1

Machine

a. General Requirements: - 100% new machine, never used - Year of manufacture: 2026 or later - Main machine quality standard: ISO 13485, EU or EC or equivalent - Operating environment: + Maximum temperature ≥ 30°C + Maximum humidity ≥ 70% - Power supply: Suitable for voltage in Vietnam b. Configuration: - Main machine: 1 unit - Multi-frequency linear detector: 1 unit - English and Vietnamese user manual: 1 set of accessories - 1KVA UPS: 1 unit - Thermal printer: 1 unit c. Technical Specifications: - Scanning methods available: Electronic convex; Electronic linear; Main Unit 1. Main Unit - Integrated design on a trolley - Number of active transducer sockets: ≥ 2 ports - Internal hard drive capacity: ≥ 256 GB - Image display depth up to ≥ 33 cm - Frame rate: ≥ 1780 frames/second - Number of digitization processing channels: ≥ 500,000 channels - Frequency range: ≤ 2 to ≥ 13 MHz (Depends on transducer) - Ultrasound beam transmission and reception technique from multiple directions (Spatial composite imaging) ≥ 9 scanning angles or Non-focal ultrasound technology. - Dynamic range: ≥ 265 dB - Tissue harmonic imaging - Continuous automatic image optimization - Automatic real-time Doppler spectrum calculation 2. Display: - Display screen: + Size ≥ 21.5 inches + Resolution: ≥ 1920 x 1080 pixels 3. Transducer - Multi-frequency linear transducer + Application: blood vessels, small organs, musculoskeletal system + Frequency range: ≤ 5 to ≥ 12 MHz + Number of transducers: ≥ 128 - Minimum operating modes: + B-mode, Encoded or inverted tissue harmonics, M-mode, Color stream mode, Power Doppler mode, Pulsed Doppler mode Scanning parameters: - B-mode scanning parameters: + Amplification: maximum ≥ 80 dB + Dynamic range: approximately ≤ 40 - ≥ 90 dB + Maximum current density: ≥ 5 steps + Average frame ≥ 8 levels or stability ≥ 8 levels + Selectable frequency (with one probe and depending on the probe) up to ≥ 4 options. + Grayscale level map: ≥ 6 types + Spot noise filtering: ≥ 6 levels + Compression ≥ 6 steps or Low-frequency feedback reduction - Mode M scanning parameters: + Gain: range from ≤ -20 dB to ≥ 20 dB - Color flow mode scanning parameters: + Flow density in zoom mode: ≥ 5 or flow density (normal): ≥ 8 + Frame average or stability: ≥ 7 steps + PRF: range ≤ 0.1 – ≥ 19.8 kHz + Color map (including velocity map) ≥ 19 types, depending on transducer and application or color code ≥ 15 types + Package size: ≤ 10 - ≥ 20 (depending on transducer and application) or adjustable by at least 3 levels + Selectable frequency (with one transducer) (and depending on the transducer) up to ≥ 4 steps or selectable frequency range with all transducer types): ≤ 1.9 - ≥ 10 MHz, (equivalent to ≥ 12 steps) + Filtering: ≥ 4 steps (levels), depending on the transducer and application + Spot noise compression or removal of body movement effects: ≥ 3 steps + Spatial filtering or smoothing: ≥ 5 steps + Color accumulation: yes - Pulsed Doppler Mode Scanning Parameters + Gain adjustment range: ≥ 60 dB + Pulse repetition frequency (PRF): ≤ 0.6– ≥ 27.5 KHz + Filtering: ≤ 6- ≥ 5000 Hz or ≥ 12 adjustment steps (depending on the transducer) + Spectrum inversion: On/Off + Compression: ≤ 0.5 - ≥ 2.4 or reduced low-frequency feedback + Trace sensitivity: 0 - ≥ 40 or enhanced grayscale - Power Doppler Mode scanning parameters + Color maps: ≥ 14 maps + Pulse repetition frequency (PRF): from ≤ 0.1 to ≥ 19.8 kHz Measurement functions: + Automatic calculation of real-time Doppler parameters + Full range of basic measurements: distance, circumference, volume, area… + Measurements in vascular ultrasound Minimum connection parameters - Connectivity: DICOM 3.0 or better - Connectivity: HDMI or DVI-D output port, USB port.

Tu Son General Hospital

Patient monitoring machine (5 parameters)

2

Machine

a. General requirements: - 100% new equipment, never used - Year of manufacture: 2026 or later - Main machine quality standard: ISO 13485 - Operating environment: + Maximum temperature ≥ 30°C + Maximum humidity ≥ 70% b. Configuration - Main unit and built-in thermal printer: 1 set - ECG connecting cable, for 3 electrodes: 1 piece - SpO2 sensor connecting cable: 1 piece - Blood pressure cuff connecting cable for children and adults: 1 piece - Children's blood pressure cuff: 1 piece - Adult blood pressure cuff: 1 piece - Recording paper: 1 pack (consumable) - Adhesive electrodes: 30 pieces/bag (consumable) - Thermal printer head cleaning pen: 1 piece (consumable) - ECG cable: 1 piece - SpO2 sensor: 1 piece - Skin temperature sensor: 1 piece - Built-in rechargeable battery: 1 piece - Machine trolley: 1 piece - Power cord: 1 piece - English and Vietnamese user manual: 1 set. Technical specifications - Monitoring and alerting on key parameters in resuscitation: ECG, respiratory rate, SpO2/pulse, NIBP, temperature. - Color, liquid crystal, touch screen display - Features arrhythmia detection and recall * Measurement Range and Accuracy - ECG: - Number of electrodes: 3 electrodes - Input dynamic range: ≥ ± 5mV - Internal noise: ≤ 30µVp-p - Common-mode noise immunity: ≥ 95dB - Input resistance: ≥ 5MΩ (at 10Hz) - Input polarization current: ≤ 100 nA - Frequency response: diagnostic mode: 0.05 to 150Hz - Display sensitivity: 10mm/mV ±5% Selectable at least x 1/4, x 1/2, x1, x2, x4, or automatic - Recovery time after electrical shock: ≤ 10 seconds * Heart rate: - Measurement method: Moving average - Measurement range: ≥ 0 to ≤ 300 beats/minute ± 2 beats/minute - Accuracy: Not exceeding ± 2 beats/minute - Measurement update interval: every 3 seconds or upon alarm - High/low alarm limits can be set between 16 and 300 beats/minute * Arrhythmia analysis: - Number of channels: ≥ 1 - VPC counting rate: From 0 to ≥ 99 VPCs/minute - Number of arrhythmia recall files: ≥ 120 hours - Storage time for each segment: ≥ 10 seconds * ST elevation: - Number of channels: ≥ 1 - ST elevation measurement range: ±2.5mV * Respiratory rate: - Measurement method: Impedance - Measurement range: 0-≥150 beats/minute - Error: Not exceeding ± 2 beats/minute - Measurement impedance: Approximately 220Ω to 4kΩ - Internal noise: ≤ 0.2Ω - Sensitivity control: x1/4, x1/2, x1, x2, x4 - Frequency response: 3Hz ±10% - Shock resistance: 400 Ws/DC 5 kV ±10% - Shock recovery time: ≤ 10 seconds - Apnea monitoring: 5 to 40 seconds in 5-second increments * SpO2: - Update cycle: Every ≤ 3 seconds or when an alarm occurs - Scanning speed: 6.25, 12.5, 25, 50 mm/s - Sensitivity: x1/8, x1/4, x1/2, x1, x2, x4, x8, AUTO SpO2: - Method: Dual-wavelength absorption - Wavelength: 650/950 nm - Display range: 0 - 100% SpO2 - Accuracy: ± 3% SpO2 - High/low alarm limits can be set * Temperature: - Measurement range: Approximately 0°C - 45°C ± 0.2°C – 0.3°C - Deviation: Not exceeding ± 0.005°C/°C - Measurement update interval: Not exceeding 3 seconds or when an alarm is triggered - High/low alarm limits can be set * Non-invasive blood pressure (NIBP): - Measurement method: Oscillometric - Measurement range: 0 – ≥ 300 mmHg - Cuff inflation range: 0 - ≥ 300 mmHg - Accuracy: ± 3 mmHg - Measurement modes: Manual, continuous (≤ 15 minutes), cyclic, SIM - Automatic re-measurement available - Air leakage: ≤ 3 mmHg/min - Display items: Systolic (SYS), Diastolic (DIA) Average MAP, cuff pressure during NIBP measurement, pulse rate - Displays updated after each measurement - Audible alert when measurement is complete. - High/low alarm limits can be set - Recovery time after shock: ≤ 10 seconds * Pulse rate: - Measurement range: 30 to ≥ 300 beats/minute - Accuracy: ± ≤ 2 beats/minute or ±3% - Recovery time after shock: ≤ 10 seconds - High/low alarm limits can be set * Display: - Color, touch screen, TFT LCD or equivalent - Screen size ≥ 12 inches, resolution ≥ 800 x ≥ 600 pixels - Waveform display: Respiratory rate, SpO2 pulse waveform, ECG - Maximum number of waveforms: 6 - Numerical display: Heart rate, VPC, ST, respiratory rate, NIBP, SpO2, pulse rate, temperature - Synchronization with heart rate, respiratory rate and pulse can be marked * Alarm function - Alarm levels: At least emergency levels, warning Alarms and Reminders - Alarm Items: Vital Signs, Arrhythmia, Technical - Alarm Indicators: Indicator lights, alarm sounds, and message marking - Alarms can be paused for a period of time or turned off * Printer - Printing Method: Thermal matrix or equivalent - Number of Printing Channels: 3 channels - Recording Modes: Manual, cyclic, alarm - Paper Speed: Selectable 12.5, 25, and 50 mm/s.

Tu Son General Hospital

Patient monitoring machine (7 parameters)

3

Machine

a. General requirements: - 100% new equipment, never used - Year of manufacture: 2026 or later - Main unit quality standard: ISO 13485 - Main unit origin: From G7 or EU countries - Operating environment: + Maximum temperature ≥ 30°C + Maximum humidity ≥ 70% b. Requirements - Main unit and built-in thermal printer: 1 set - 3-wire ECG cable: 1 piece - Reusable non-invasive blood pressure (NIBP) cuff for adults: 1 piece - Reusable NIBP cuff for children: 1 piece - EtCO2 measurement kit: 1 set - IBP probe connector cable: 1 piece - Reusable SpO2 cable and probe for adults and children: 1 set - Reusable skin temperature probe: 1 piece - Machine trolley: 1 piece - Power cord: 1 piece - English-Vietnamese user manual: 1 set Technical Specifications: * Measurement Range and Accuracy: ECG: - Number of Electrodes: ≥ 3 (I, II, III) - Input Dynamic Range: ≥ ± 5mV - Internal Noise: ≤ 30µVp-p - Display Sensitivity: Selectable automatically or manually with values ​​of 10mm/mV x 1/4, x 1/2, x1, x2, x4, or automatic * Heart Rate - Measurement Method: Moving Average or equivalent. - Measurement range: ≥ 0 to ≤ 300 beats/minute ± 2 beats/minute - Measurement update interval: No more than 3 seconds or when an alarm is triggered * Arrhythmia analysis - Number of channels: 2 - Storage time for each segment: ≥ 8 seconds ST elevation - Number of channels: 1 - ST elevation measurement range: ±2.5mV * Respiratory rate - Measurement method: impedance or equivalent - Measurement range: ≥ 0 to 150 beats/minute - Accuracy: ± 2 beats/minute - Measurement impedance: Approximately 220Ω to 4kΩ - Display sensitivity: ≥ 5 values ​​10mm/ 1 Ω x 1/4 to x4 - Frequency response: Approximately 3Hz * SpO2 - Measurement range: 0 to 100% - Display range: ≥ 70 to 100% - Measurement update interval: None Over 3 seconds or when an alarm is triggered - Audible alarm with tone changing according to changes in SpO2 measurement value - Waveform sensitivity: Automatic or manual selection of x1/8, x1/4, x1/2, x1, x2, x4 and x8 values ​​* Temperature - Measurement range: 0ºC - 45ºC - Deviation: Not more than ± 0.005ºC/ºC - Measurement update interval: Not more than 3 seconds or when an alarm is triggered * Non-invasive blood pressure (NIBP) - Measurement method: Oscillometric or equivalent - Cuff pressure range: 0 to ≤ 300 mmHg - Maximum measurement time: Adults/children: ≤ 160 seconds, neonates: ≤ 80 seconds - Maximum pressure value: Adults/children ≥ 300mmHg, neonates: ≥ 150mmHg - Audible alarm * Invasive Blood Pressure (IPB) - Measurement range: 50 to 300 mmHg - Accuracy: ± 4% or ± 4mmHg - Auto-zero point equilibrium range: ± 200 mmHg - Auto-zero point equilibrium accuracy: ± 1mmHg - Noise level: Not exceeding ± 1mmHg - Measurement update: Not exceeding 3 seconds or when an alarm is triggered - Pulse measurement range: 30 to 300 beats/minute ± 2 beats/minute * EtCO2 - Startup time: ≤ 5 seconds - Measurement update: Not exceeding 3 seconds or when an alarm is triggered - Measurement range: 0 to ≤ 100 mmHg - Error: Not exceeding ± 10% - Response time: ≤ 160ms - Respiratory rate measurement range: 3-150 breaths/minute ± 10% * Display - Color touchscreen display, TFT LCD or equivalent type - Screen size ≥ 12 inches. - Displays 7 parameters simultaneously: ECG, respiratory rate, pulse, SpO2, IBP, CO2, and temperature. - Scanning speed: 6.25, 12.5, 25, and 50 mm/second. - Scanning time at 25 mm/second: 6.5 seconds. * Alarm function - Three alarm levels: Emergency, Reminder/Warning - Technical alarm items: Wire disconnection, interference, electrode disconnection, waveform detection, probe disconnection, blood pressure cuff/connector check, low battery… - Alarm type: Audible alarm, flashing/on light alarm, message/numerical data marking. - Alarm parameters: High and low alarm thresholds can be set. - Alarm can be deactivated within 1, 2, or 3 minutes. * Printer - Printing method: Thermal matrix or equivalent - Number of printing channels: 3 channels - Recording mode: Manual, cyclic, alarm - Paper speed: Selectable 12.5, 25 and 50 mm/s * Supply voltage - AC: 100 to 240VAC, 50-60Hz - DC: built-in battery, operating time ≥ 90 minutes

Tu Son General Hospital

Electrical syringe

10

Machine

a. General Requirements - 100% new, unused production equipment - Year of manufacture: 2025 or later, 100% new - Main machine manufacturer meets ISO 13485 quality standards - Main machine origin: From G7 or EU countries - Power supply: 220V/380V ± 10%, 50 Hz or suitable for Vietnam's power supply - Operating environment: + Maximum temperature ≥ 30°C + Maximum humidity ≥ 70% b. Configuration - Main machine with standard accessories: 1 set - Rechargeable battery: 1 set - Clamp/hanging lock: 1 set - Power cord: 1 - User manual in English and Vietnamese: 1 set c. Technical Specifications * General Features: - Color LCD or TFT screen or equivalent, size ≥ 3 inches - Indicator lights to show operating status, shutdown status, and warnings. - Two power sources: AC mains power and internal battery. * Technical Specifications: - Compatible syringe sizes: 5mL, 10mL, 20mL, 30mL, 50/60mL - Dosing Modes: + ml/h mode + µg/kg/min mode + mg/kg/h mode - Injection Rate: 0.1 to ≥ 1200mL/h + From 0.1 to ≥ 150 mL/h (using 5mL syringe) + From 0.1 to ≥ 300 mL/h (using 10, 20, 30 mL syringes) + From 0.1 to ≥ 1200 mL/h (using 50/60 mL syringe) - Step increment: ≤ 1 mL/h - Rate setting via rotary knob, button, or touchscreen - Injectable fluid volume: 00 to ≥ 9999 mL (step increment) ≤ 1 mL) - Rapid injection rate (Bolus) when pressing and holding the button: ≥ 100 mL/h (using a 5 mL/h syringe) + From 100.00 to ≥ 300.00 mL/h (using 10, 20, 30 mL syringes) + From 100.00 to ≥ 1200.00 mL/h (using a 50/60 mL syringe) - Rapid injection volume without pressing and holding the button (Bolus): 1 to ≥ 10 mL (setting increment ≤ 0.1) - Accuracy: ±3% with flow rate ≥ 1 mL/h - Infusion line blockage/occlusion alarm pressure: 50 to ≥ 120 kPa - Purge/air removal rate: Approximately ≥ 150 mL/h (using a syringe) 5 mL) + Approximately ≥ 300 mL/h (using a 10 mL syringe) + Approximately ≥ 400 mL/h (using a 20 mL syringe) + Approximately ≥ 500 mL/h (using a 30 mL syringe) + Approximately ≥ 1200 mL/h (using a 50/60 mL syringe) Alarms will sound in the following cases: Infusion line blockage, nearly empty fluid, incorrect syringe body assembly, low battery, infusion parameters not set, completion of preset fluid volume.

Tu Son General Hospital

Transmission machine

2

Female

a. General Requirements - 100% new, unused production equipment - Year of manufacture: 2026 or later - Main machine manufacturer meets ISO 13485 quality standards - Origin of main machine: From G7 or EU countries - Power supply: 220V/380V ± 10%, 50 Hz or suitable for Vietnam's power supply - Operating environment: + Maximum temperature ≥ 30°C + Maximum humidity ≥ 70% b. Configuration - Main machine and all standard accessories: 1 unit - Transfer terminal clamp: 1 unit - User manual in English and Vietnamese: 1 set c. Technical Specifications - Infusion pump capable of administering fluids and blood transfusions - Features a 4-inch or larger color LCD screen displaying parameters - DC power supply: Internal rechargeable battery provides continuous operation for 5 hours during power outages. - Includes an auxiliary battery for warning in case of battery failure or power outage. - Includes error and status indicator lights - Dose setting modes: ml/h; µg/kg/min; mg/kg/h - Infusion rate: + 0.1 – ≥ 1,200 ml/h + Step increment: 0.1 ml/h (within the infusion rate range of 0.1 – 100 ml/h) 1 ml/h (within the infusion rate range of 100 – 1,200 ml/h) - Volume limit: + 0.10 to 100 ml (step increment ≤ 0.1 ml) + 100 to 9,999 ml (step increment ≤ 1 ml) + Option to not set volume limit - Infusion time limit: + 1 minute to ≥ 99 hours 59 minutes (step increment 1 minute) + Option to not set infusion time limit - Dose setting range: + 0.01 to 10 (step increment 0.01) + 10 to 100 (step increment 0.1) + 100 to 999 (setting step 1) - Patient weight setting range: 0.1 – 300 kg (setting step 0.1 kg) - Set rapid infusion rate (Bolus) when pressing and holding the button: + 100 to ≥ 1,200 ml/h + Setting step ≤ 100 ml - Set rapid infusion volume without pressing and holding the button: + 0.01 to 10 mL (setting step ≤ 0.01 ml) + 10 to 100 mL (setting step ≤ 0.1 ml) + 100 to 999 mL (setting step ≤ 1 ml) - Set rapid infusion time without pressing and holding the button: 1 second to 60 minutes or more (setting step 1 second) - Display range for infused fluid volume: + 0 to ≥ 10 ml (setting step) ≤ 0.01 ml) + 10 to ≥ 100 ml (setting increment ≤ 0.1 ml) + 100 to ≥ 9,999 ml (setting increment ≤ 1 ml) - Accuracy: ± ≤ 5% - Pressure threshold for blockage detection: + Upper blockage detection pressure threshold: -100 to -30 kPa or more + Lower blockage detection pressure threshold: 30 to 120 kPa or more + ≥ 10 levels of lower blockage detection pressure threshold can be set - Fast infusion rate: ≥ 500 ml/hour - Alarms in the following cases: + Upper blockage + Lower blockage + Nearly empty infusion fluid + Air in the infusion line + Pump door open + Abnormal infusion rate + Empty infusion bottle + Low battery + Battery dead + Repeat alarm + START button prompt. + Infusion rate not set + Infusion volume not set + Infusion rate set exceeds the infusion volume limit + Preset volume completed - Safety functions: + Select line blockage alarm pressure at ≥ 10 levels + Select air infusion alarm sensitivity at 2 levels + Function to set near-empty infusion volume detection + Line automatically clamped when pump door opens + Set speed range limit A (Soft limit) + Set speed range limit B (Hard limit) + Keypad lock to prevent accidental key presses while the machine is operating + Bolus deceleration function - Other functions: + Display infusion line installation instructions on LCD screen + Display the type of infusion line being used on LCD screen. + Select and display infusion line type on LCD screen + Select infusion drop volume + Display infusion drop volume + Set infusion volume + Set infusion time + Audible alert in Purge/Bolus mode + Clear infused volume + Standby mode + Set standby time + Adjust alarm volume + Adjust keypad volume + Audible alert when STOP button is pressed + ≥ 5 levels of LCD screen brightness adjustment + Set and report device maintenance time + Set date and time + Save and view data: Approximately ≥ 10,000 events + AC mains power detection + Audible alert when AC mains power is detected + Keep injection line open + Clear infused fluid while the machine is still operating + Change speed while the machine is operating + Select dose setting mode while the machine is operating + Select alarm tone + Select 100 setting steps to shorten setting time + Fast infusion by pressing and holding Key + Fast infusion mode (no need to press and hold the key) + Audible alert when power is off. + Microdose symbol display selection function + Fast infusion by pressing and holding the key + Fast infusion mode (no need to press and hold the key) + Audible alert when power is off. + Microdose symbol display selection function

Tu Son General Hospital

Electrolytic

2

Machine

a. General requirements - 100% new, unused equipment - Year of manufacture: 2025 or later - Meets quality standards ISO 13485, MDR or equivalent - Origin: Group of G7 countries b. Configuration - Main machine with accessories: 01 set - 5 cm2 probe: 01 piece - Power cord: 01 piece - Patient cable + alligator clip: 02 pieces - Rubber electrode with belt: 01 set - User manual in English and Vietnamese: 01 set c. Technical specifications - Power source: Suitable for voltage in Vietnam - Power consumption: ≤60VA - Electrical protection level: I - Number of treatment channels: ≥2 channels - Screen: Color touch screen ≥7 inches, ≥1024×600 - Minimum current types: Galvanic current, Diadynamic current, High voltage current, Medium frequency current, Interferential current, Micro simulation current, Low frequency rectangular current - Preset program available - Galvanic current: ≥80 mA - Diadynamic current: ≥20 mA - High voltage current: ≥250 mA / 128V - Medium frequency current: ≥80 mA - Interference current: ≥100 mA - Micro simulation current: ≥2 mA - Low frequency rectangular wave current: ≥80 mA - Data storage Material: Internal memory, memory card or equivalent storage method - Capable of incorporating ultrasound function: - Application part: Type BF; ultrasound head - Therapy frequency: + 0.8 MHz + 2.4 MHz - Intensity level: 0.1 to 3 W/cm² within 0.1 W/cm²

Tu Son General Hospital

Electric machine

20

Female

a. General requirements: - 100% new, unused equipment - Year of manufacture: 2025 or later - Quality standards: ISO 13485 b. Configuration - Main machine: 01 piece - UM1 1.5V battery (big battery): 04 pieces - Acupuncture needle set: 01 set - Electrode wire: 06 pieces - User manual: 01 set c. Technical specifications: - Frequency and amplitude of output waves can be adjusted - There are ≥ 2 types of output waves: Add and describe or more - The machine uses DC batteries, does not use direct power. - There are ≥ 2 LED lights flashing according to the output frequency. - Frequency ≥ 2 output waveforms adjustable from ≥ 0.5 to 45 Hz - Pulse form: oscillating pulse, using both positive and negative parts. - Main pulse width, in ms: ≤ 0.4 ± 10%. - Output pulse amplitude, in Vpp: ≥ 0 to 140 ± 10%. - Pulse frequency, in Hz: ≥ 0.5 to 45 Hz. - There are ≥ 6 intensity adjustment knobs for ≥ 6 separate outputs. - Has a time setting: Set treatment time ≤ 90 minutes, error ≤ 3 minutes - Has sound warning (bell when time runs out). - Shell made of ABS plastic (base made of PP plastic).

Tu Son General Hospital

Automatic intraocular pressure monitor (non-contact)

1

Machine

a. General requirements - 100% new equipment, never used - Year of manufacture: 2025 or later - Main machine meets quality standards: ISO 13485 - Origin of main machine: Made in a country belonging to Group G7. b. Supply configuration - Main body and standard accessories: 01 piece - Dust cover: 01 piece - Integrated touch screen: 01 piece - Chin rest paper: 01 file - Lifting table with electric motor: 01 piece (China) - User manual in English and Vietnamese: 01 set c. Technical requirements - Has touch sensor. Helps quickly align between eye center and screen center. Has automatic alignment and automatic capture functions - Notifies the patient about the time of measurement - Has a function to calibrate eye pressure + Stable air pressure between measurements + Measurement delay time is ≤ 15 ms - Noise level is only ≤ 55 dB * Technical specifications: - Touch screen, size ≥ 5.7 inches - Measurement range: 0 to ≥ 60 mmHg - Movement range of the probe chin: ≥ 70 mm - Parts can be moved: + Up - down: ≥ 45 mm + Right - Left: ≥ 88 mm + Front - back: ≥ 40 mm - Communication port: RS - 232C - Print results: Integrated thermal printer

Tu Son General Hospital

Endoscopic ENT

1

System

a. General requirements: - 100% new equipment, never used - Year of manufacture: 2026 or later - Meets quality standard: ISO 13485 b. Configuration - The ENT endoscopy system includes: - Camera: 1 unit - Full HD image processor: 1 unit - Light source: 1 unit - Light guide cable: 1 unit - 0° endoscope (Size Ø 3mm x 110 mm): 1 unit - 0° endoscope (Size Ø4mm x 175 mm): 1 unit - 70° endoscope (Size Ø4mm x 175 mm): 1 unit - Machine trolley: 1 unit - Endoscope monitor: 1 unit - Power cord: 1 unit - Computer including Intel® Core™ i5 CPU, RAM: 8GB, Hard drive: 256GB SSD, Monitor ≥ 23 inch: 1 set - Color printer: 1 unit - User manual: 1 set Technical Specifications: * Image Processor - Power Supply: AC220V/50Hz - Video output with minimum ports: 2 HDMI, 1 DVI, 1 AV - Features include: White balance, Color correction, Zoom in/out, Pedal-operated shutter, Playback and replacement of captured images, Display: Real-time display, ≥ 3 split-screen modes (1, 2, 4 images, standard HD or more), Integrated physical control panel with waterproof and chemical-resistant membrane or equivalent. * Light Source - Power Supply: 220V/50Hz - Bulb type: LED or higher - Color temperature/Color rendering index: ≥ 5000 to 6000K/CRI 90 - Minimum of the following functions: - Brightness display - Brightness adjustment - Display of 80% brightness level when switched on - Age Lamp lifespan: ≥ 45,000 hours - Light plug standard: Storz/Wolf or equivalent * Endoscope camera - CMOS image sensor or higher - Image display ratio: 16:9 (1920 x 1080) - 5x4 (1280 x 1024) - Resolution: ≥ 1945 x 1109 ~ 2.16 Mega pixels - Camera has buttons: Zoom and shutter buttons * Light guide cable: - Length ≥ 2m - Outer diameter: ≤ 10 mm - 0° endoscope: Size: Ø 3mm x 110 mm - 0° endoscope: Size: Ø4mm x 175 mm - 70° endoscope: Size: Ø4mm x 175 mm * Machine trolley - Pressure die-cast aluminum column, anodized and powder coated - Wheels Vehicle diameter 100mm - Tool box with adjustable drawers - Camera and light cable suspension: Soft, scratch-resistant - Monitor suspension: Adjustable up/down, tilt, fold, and rotate - Endoscope holder: For storing the optics - Power supply system: ≥ 3 power outlets with covers, main On/Off switch * Endoscope monitor - Screen size: ≥ 27 inches - IPS technology or equivalent - Response time: ≥ 5 ms - Resolution ≥ 4K (3840 x 2160 pixels) - Signal input: HDMI

Tu Son General Hospital

Helicolytic treatment machine

1

Machine

a. General requirements - 100% new, unused production equipment - Year of manufacture: 2026 or later - Manufacturer meets ISO 13485 standards (for main machine) - Origin (for main machine): G7 - Equipment operating environment: + Maximum temperature: ≥ 30 degrees Celsius + Maximum humidity: ≥ 70% - Operating voltage: can be used with the voltage in Vietnam b. Configuration requirements: - Hand-held endodontic hand (body): 01 pc - Power supply + battery charger: 01 pc - Protective bag: 30 pcs - Mouth/cheek electrodes: 03 pcs - File clip: 01 pc - Connecting wire: 01 pc - User manual in English + Vietnamese: 01 set c. Technical specifications: Functions: - Apical positioning - Optimize sliding path - Optimize sliding path 2 - Optimize torque force - Optimize apical operation - Optimize apical operation 2 - Automatically turn on and off, automatically rotate when reaching the apex - Automatically stop at the apex, rotate slowly when reaching the apex - Gradually reduce torque, gradually reduce torque when reaching the apex - Reversal of torque Technical specifications - Endodontic hand: + Rotation speed: from 100 to ≥ 1000 rpm. + Torque: ≥ 4 Ncm - Rechargeable battery: + Machine uses Battery: Lithium-ion battery or equivalent + Estimated input voltage: DC 5V + Estimated input current: ≥ 2.A AC adapter + Input voltage: AC100 - 240 V + Estimated input frequency: ≥ 47 - ≤ 63 Hz + Estimated input current: ≥ 0.4A

Tu Son General Hospital

Hand -held spo2 meter

6

Machine

a. General requirements - 100% new, unused production equipment - Year of manufacture: 2025 or later Quality standards: ISO13485, CE or equivalent b. Configuration - Main body: 1 piece - Reusable SpO2 sensor for adults: 1 piece (for children, infants: optional) - Protective cover (optional): 1 piece - Lithium battery: 1 piece - Lithium charger: 1 piece - User manual in English + Vietnamese: 01 set c. Technical specifications: - TFT screen simultaneously displays SPO2 number, heart rate, perfusion index (PI), wave area - Suitable for both adults, children and infants - Audible and visual warning expressions can be adjusted according to the user's wishes - Manage patient information, allowing review of ≥ 600 most recent SPO2 and heart rate measurement results through tables and graphs displayed on the screen. - Display: Color LCD ≥ 2.3'' - SPO2 accuracy: Range: 70 to 100% ± 2 digits, 0% to 69%: unknown - Heart rate accuracy: Range: 25 to 250 ± 3 digits - Power supply: Lithium battery ≥ 3.7v or Alkaline battery: 3x1.5v AA - Operating time: Alkaline battery: ≥ 8 hours, Lithium battery: ≥ 10 hours - Charging time (for Lithium battery) ≤ 3 hours to get ≥ 90%, ≤ 6 hours to get 100%.

Tu Son General Hospital

Specialized medicine cabinet

3

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and FDA standards or equivalent b. Configuration: Specialized medicine cabinet: 01 c. Technical specifications: - Dimensions (LxWxH): (900x400x1700) ± 10mm - Cabinet divided into two compartments, with separate locks for each compartment: + Upper compartment ≥ 900mm, has 2 white glass doors, with hidden lock. Divided into 3 compartments with 2 inclined floors made of stainless steel plates; Above there are 2 AB compartments; has a separate key. + The lower compartment is ≥ 650mm high, has 1 stainless steel floor that can be removed or attached to the cabinet with mounting plates, 2 stainless steel doors, with locks. - Roof, roof, rear, floor covered with stainless steel panels. - 4 cabinet legs with rubber cushions. - Material: All metal parts are made of stainless steel 304 or higher + Cabinet frame, cabinet doors are made of stainless steel box 25x25, ≥ 0.6 mm thick + Surrounding panels, return, cabinet bottom, doors are made of stainless steel sheets ≥ 0.5 mm thick - White door glass is ≥ 5 mm thick

Tu Son General Hospital

Specialized injection vehicle

2

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and FDA standards or equivalent b. Configuration - Emergency equipment cart: 01 - Cart includes 5 drawers - Plastic box for needles to destroy: 02 - Plastic bin for medical waste: 02 - Shelf for defibrillator or monitor: 01 - CPR plate: 1 - File tray: 01 - Infusion pole: 01 Hook to hold oxygen tank: 01 - Vehicle has 04 wheels, 02 with wheels brake c. Technical specifications: - Dimensions (length x width x height): 840mm x 495mm x 965mm - The chassis is made of shaped aluminum bars. - The car's surface is made of monolithic molded plastic, the railing is made of stainless steel Ø 12.7, ≥ 70mm high. - The drawer is made of powder-coated steel, inside there are bars that divide the large tray into many small trays, with locks.

Tu Son General Hospital

Suction machine (low pressure)

2

Machine

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2026 or later - Main machine quality standards: ISO 13485 - Power supply: 220 – 240 VAC, 50/60Hz b. Configuration - Main machine with power cord: 01 piece - Suction tube length ≥ 120 cm: 2 pieces - Suction bottle ≥ 2 liters: 02 pieces - Bacterial filter: 02 pieces - Spare fuse: 02 pieces - 2-way conduit: 01 piece - English-Vietnamese usage documents: 01 set c. Technical specifications: - The machine is controlled by a microprocessor circuit - The machine has intermittent suction mode and continuous suction mode - You can set the suction time for the intermittent suction mode - The minimum suction time is ≥ 1 minute and the maximum ≤ 99 minutes - You can set the rest time for the intermittent suction mode - There is a pressure display - The suction bottle uses PC plastic that can be autoclaved (Autoclave) - The surface is made of stainless steel rusty - Safety device with anti-spill float assembly - Power consumption: ≤ 10W - Maximum negative pressure adjustment: 0 ~ ≤ 1500 mmH2O - Fluid tank capacity: ≥ 2000 ml x 02 pieces - Has a clock-type pressure gauge - Has a sterilization filter

Tu Son General Hospital

Suction machine (two-bottle pressure)

2

Machine

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Quality standards: ISO 13485 b. Configuration - Soft straw: 1 pc - Filter: 2 pcs - Power cord: 1 pc - Foot switch: 1 pc - Suction bottle: 02 bottles - User manual: 1 set 2. Technical specifications - Power source: AC220V±22V; 50Hz - Maximum vacuum pressure: ≥ 80kPa - Maximum pump suction pressure (suction speed): ≥ 20L/min - Operating noise: ≤ 60dB(A) - Suction tank: ≥ 2500ml with 2 tanks

Tu Son General Hospital

Patient bed

40

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and FDA quality standards or equivalent. b. Supply configuration: - Patient bed type 1 crank: 01 piece. - Bed mattress: 01 piece. - Hand crank: 01 piece. - Bed railing: 01 set. - Transmission pole: 01 piece. c. Technical specifications: - Dimensions (Length x Width x Height): + Length = 2,150mm (± 5%) (including headboard). + Width = 960mm (± 5%) (including barriers), 900 (± 5%) (without barriers). + Height = 510mm (± 5%) (not including cushion). - Highest back and head elevation angle: About 85° ± 5°. - Paint material: Powder coating. - Bed surface: The sections are made of ABS plastic, molded in one solid piece, making it easy to clean. - The inlaid surface has open oval holes divided into 2 parts: + Head back plate: 700mm long x 820mm wide x 40mm thick (±5mm). + Bed body panel: Length 1,175mm x width 820mm x thickness 40mm (±5mm). + Bed floor size: 820mm x 1,910 mm (±5mm). - Bed frame: Made of powder-coated box steel, box size ≥ 40mm x 80 mm, 1.5 mm thick. - Bed legs: Made of powder-coated box steel, box size ≥ 50mm x 50mm, 1.4mm thick. The two legs of the bed are connected together with a square steel box ≥ 30mm x 30 mm - Headboard: Made of ABS plastic, removable and easy to clean. - Headboard dimensions: 930mm long x 530mm high x 50mm thick (±5mm). - Crank: The bed has a crank with a threaded screw system on the outside covered with a plastic tube. - The crank can be folded at the end of the bed. - Fence: + Materials made of plastic, powder-coated steel and aluminum alloy. + The barrier is ≥ 1,460mm long, about 360mm high (± 5mm), can be folded down. + The barrier has 6 vertical stainless steel bars. - Cushion: + Dimensions: 1,910mm x 840mm (± 5mm). + Thickness: ≥ 70mm. + Cushion cover: Made of waterproof material. + Cushion: Made of PE.

Tu Son General Hospital

Bunker cabinet

40

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and FDA quality standards or equivalent. b. Supply configuration: - Plastic bedside cabinet: 01 piece. - Wheels: 04 pieces. c. Features and specifications: - Dimensions: 470mm x 470mm x 780mm (tolerance +/- 5%). - Materials: ABS plastic. - Table top for sitting and eating (top compartment, can be pulled in and out). - In the middle is a drawer for items. - Storage compartment with cabinet doors. - There are towel racks on both sides of the cabinet.

Tu Son General Hospital

Automatic hand sink

2

System

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and CE standards or equivalent b. Configuration: - Surgical hand sink with 2 faucets: 01 piece - Standard installation accessories included: 01 set - Water pressure pump: 01 set - Filtration system: 2 coarse filters, 1 fine filter. - UV lamp: 01 set - Infrared sensor system combined with solenoid valve: 02 sets - Knee switch system: 02 sets - Water supply faucet: 02 sets - Automatic soap dispenser and dispenser: 01 set - Electrical control cabinet system: 01 set - English-Vietnamese user manual: 01 set c. Technical specifications: - Power source: 220V, 50 Hz ± 10% - Sterile hand washing sink is made of chemical-resistant monolithic composite used in medicine, fixed on the wall - The sink operates completely automatically and is adapted to environments with many interfering devices. - Water pressure pump with capacity ≥ 150W - Filter system: + Coarse filter ≥ 5 µm + Fine filter ≥ 1 µm. - Water sterilization system: + UV lamp has 3 layers + UV lamp capacity ≥ 29W. + Water can be sterilized up to ≥ 98%. + UV lamp life ≥ 9,000 hours. - Water heating system: Direct heating tank type, with temperature regulator to adjust the hand sanitizer temperature to suit the user from ambient temperature to 40° - High sensitivity infrared sensor system combined with solenoid valve - Knee switch system: One-touch shutdown type. - Water supply faucet: 304 stainless steel water supply faucet with automatic control. - Automatic soap dispenser and dispenser - Control cabinet system: All electrical equipment is installed in 01 electrical cabinet and placed inside the sink and suitable for the medical environment - Indicator light of voltage entering the sink: Yes - Sink: Volume 110 -120 liters - Approximate tank size (L x W x H): 1500x600x750 (mm) (tolerance ±5%)

Tu Son General Hospital

Minor surgery

1

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 and CE standards or equivalent b. Configuration - Minor surgery table: 01 piece - Cushion: 01 piece c. Technical specifications: - Dimensions: (tolerance ± 5%) + Length 1950mm + Width 750mm + Height 750mm - Material is stainless steel - Includes 2 parts: Table top and table legs - Table top has raised head and back - Table top frame is 30x30 stainless steel ≥ 1mm thick; Table legs are made of stainless steel F32x1mm - Leg braces are made of 22 x 0.8mm - Table top and lifting head are made of stainless steel ≥ 0.8 mm - Lifting head can change the lifting angle from 0' - 60o - Table top and table legs are connected together by bolts and the support is ≥ 3mm - Foam cushion covered with faux leather fabric suitable for minor surgery tables

Tu Son General Hospital

Neonatal resuscitation bed (combined with jaundice light)

1

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 standards b. Configuration: - Main machine with monitoring screen: 1 piece - Heating head integrated synchronously with main machine: 1 piece - Central skin temperature sensor, multiple use: 1 set - Peripheral skin temperature sensor, multiple use: 1 set - Mattress: 1 piece - Specialized cart with 4 wheels, designed synchronously with the main machine: 1 piece - User manual: 1 set c. Technical specifications: - Main machine system: + The device is a heating system for newborns + Control panel with LED display screen (with audio alarm) - Skin temperature measurement: Setting range: 32°C to 39°C - Jaundice lamp wavelength: within the range of 400nm - 500nm. - Power source: + Power consumption of heating element: ≤ 700 W + Voltage: 220V; 50Hz - Dimensions: + Bed size (length x width): About 550 - 700 mm × 550 - 700 mm + Bed tilt can be adjusted

Tu Son General Hospital

Newborn resuscitation bed

1

Female

a. General requirements: - 100% new, unused production equipment - Year of manufacture: 2025 or later - Meets ISO 13485 standards b. Configuration of Heated bed for newborns with standard accessories: 01 set including - Instrument tray: 01 - Skin temperature sensor: 01 - Infusion hanger: 01 - Cushion: 01 - User manual in English and Vietnamese: 01 set c. Technical specifications - Measurement: + Display resolution: ≥ 0.10C + Measurement resolution: ≥ 0.10C + Measurement parameters: Ambient temperature, probe (sensor) temperature - Measurement range + Heating measurement temperature: 0 - 40oC + Set temperature range: 32oC - 39oC - Proportional control based on set temperature and environmental temperature, ensuring safety by probe temperature - Dimensions: + Overall dimensions: 880 x 570 x 1800 mm (LxWxH) + Bed size: 880 x 565 x 1040 mm (LxWxH) + Crib size: Approx. 460 x 700 (mm) - Bed material: Transparent Meca - Height adjustment: From 1600: 1800 mm (Approx. 200 mm adjustment) - Crib height above the ground: ≥ 870 (mm) - Minimum heating rod life ≥ 2000 hours of use - Heating area: 800 x 600 mm (LxW) at a distance of 700 mm from the heating tray to the patient - Lighting system: Includes 6 1W warm white LEDs - Wheels: 4 rotating wheels, 65mm diameter (tolerance ± 5%) - Heating trough tilt: ± 40o - Weight: 25 to 30 kg - Infusion hanger: 150mm (tolerance ± 5%) - Working environment: + Measurement temperature range: From 0 to 40oC + Heating power level adjustment range: 0% to 100% - Noise: ≤ 20 dB (or ≤ 15 dBA - approved level adjusted to the same frequency to match the characteristics of the human ear) - Radiant power of heating head: ≥ 400W - Power source used: Nominal 220VAC - 50Hz, actual 185 to 240V AC, 47-63Hz - Optional accessories: Temperature sensor

Tu Son General Hospital