Purchasing equipment, reagents, chemicals, and supplies for disease prevention programs.

Test for Heroin/morphine in urine

540

kiểm TRA

Qualitative detection of OPI/Morphine in urine. Detection limit: 300 ng/mL. Correlation sensitivity: 100%, Correlation specificity: 100%. Meets ISO 13485 standards.

TTYT KV Lương Sơn

Medical cotton

16

Kg

100% natural cotton gauze pads. White, odorless, soft, durable, and non-friable with very high absorbency. Available in roll form, tightly wound into rolls to meet user requirements. Non-toxic and hypoallergenic, free of starch and water-soluble cotton fibers and bodily fluids. Absorption rate ≤ 5 seconds. pH and alkalinity: Neutral; Fat content: ≤ 0.5%. Water solubility: ≤ 0.5%; Moisture content: ≤ 8%; Packaging: 1kg/package. Meets ISO 9001:2015, ISO 13485:2016 standards; FDA registration certificate; CE certification.

TTYT KV Lương Sơn

Sterile medical gloves

350

Pair

Sterile surgical gloves: a. Physical size: Average length 280mm, Palm width: Size 61/2: 83±5mm, Size 7: 89±5mm, Size 71/2: 95±5mm. Minimum thickness of 1 layer for all sizes: 0.15mm - 0.20mm b. Tensile strength and elongation: Minimum tensile strength: Before aging: 15N, After aging: 11N. Maximum tensile force at 300% elongation before accelerated aging: Max2.0N. Minimum elongation: Before aging: 750%, After aging: min 650% c. Watertightness (perforation): Test level G-I, AQL 1.0 d. Average weight: g/pair and tolerance ±0.2g. Size 61/2: 16.5g; 7.0:18.5g; 71/2: 20.5g. e. Amount of lubricating powder (located on the inside of the glove): 100mg±20mg f. Advanced standards: Can meet requirements to increase/decrease glove thickness due to the specific nature of the treatment methods of some hospitals. The level of static electricity is below 100V. Sterilized with EO gas. TCVN 6344 (ISO 10282:2014). ISO 9001:2015; ISO 13485:2016.

TTYT KV Lương Sơn

Alcohol 70 degrees

31

Bottle

Ethanol 70 degrees, clear and colorless. 500ml bottle Meets ISO 13485:2016 standards

TTYT KV Lương Sơn

0.1 ml injection needle pump

1.000

Female

I. General Standards: These include the following 6 standards: 1. Syringes made of disposable plastic for injecting vaccines into the skin. 2. The syringe volume is 0.1ml. 3. The needle size is 25g 1” (25g 1 inch). 4. The raw materials used to make the syringes: cylinder, piston, and needles must be medical-grade materials. 5. Syringes must have an auto-disable feature, meaning that after the vaccine or injectable solution has been completely drawn into the syringe and injected, the piston cannot be returned to draw another dose. 6. The assembled syringes, needles, and protective caps are hermetically sealed in a single package, and then sterilized according to sterilization procedures. II. Syringe Standards: These include the following 7 standards: 1. Must ensure clarity for easy measurement. 2. Must be free of pyrogens and toxins. 3. The inner surface of the syringe must not have any foreign matter that comes into contact with injectable solutions. 4. The volume markings must be clear, uniform, and run along the length of the syringe. The markings and numbers must adhere firmly to the syringe walls and should not peel off when touched. 5. When the piston is fully retracted within the syringe cylinder, the piston's zero mark must align with the zero mark on the scale. 6. When using gas and injectable solutions, they must not leak through the plunger seal (plunger head). 7. The plunger tip must fit snugly into the syringe, without leaking injectable solution or air at the connection between the plunger tip and the needle. III. Needle Standards: These include the following 8 standards: 1. Must be free of pyrogens and toxins. 2. The needle surface must be smooth, clean, and free of impurities when viewed with the naked eye. 3. The needle body must be made of stainless steel, with sufficient mechanical strength and not break or bend under normal use conditions. 4. The needle tip must be sharp, without burrs or other defects. 5. The needle shaft must be made of a material suitable for its intended use; if the needle shaft is made of plastic, it must be colored according to international standards. 6. The needle shaft surface must not have any manufacturing defects. 7. The connection between the needle body and the syringe must be strong and not break or detach under normal use conditions. 8. The needle tip must have a protective cap. IV. Packaging Standards: These include the following 3 standards: 1. The packaging unit must clearly indicate all components: type of syringe, manufacturer name and address, sterilization status, volume, needle size, needle length, production batch, manufacturing date, expiration date. For imported products, there must be a supplementary label in Vietnamese that provides detailed information similar to domestically produced products. Product name ... 2. Each syringe is packaged separately in a blister pack. 3. The shelf life of the finished product must be at least 24 months from the date of receipt. V. Other Standards: 1. The manufacturer must meet ISO 13485 and ISO 9001 quality management standards.

TTYT KV Lương Sơn

0.5 ml syringe

7.500

Female

I. General Standards: These include the following 6 standards: 1. Syringes made of single-use plastic for injecting vaccines into the skin. 2. The syringe volume is 0.5ml. 3. Needle size is 25g 1” (25g 1 inch). 4. The raw materials used to make the syringes: cylinder, piston, needle... must be medical-grade materials. 5. The syringe must have an auto-disable feature (also known as self-locking or self-destruct), meaning that after the vaccine or injectable solution has been completely drawn into the syringe and injected, the piston cannot be pulled back to draw another dose of vaccine or injectable solution. 6. Syringes, needles, and protective caps are hermetically sealed in a single package, and then sterilized according to sterilization procedures. II. Standards for Syringes: These include 7 standards: 1. The syringe must have clear markings to easily determine the dosage. 2. It must be free of pyrogens (fever-inducing substances) and toxins. 3. There should be no foreign matter on the inner surface of the syringe that comes into contact with the injectable solution. 4. The volume markings must be clear, uniform, and run along the length of the syringe. The markings and numbers must adhere firmly to the syringe walls and not flake off when touched. 5. When the piston is fully retracted inside the syringe cylinder, the piston's zero mark must align with the zero mark on the scale. 6. During use, no air or injectable solution can leak from the plunger (plunger head). 7. The plunger tip must fit snugly into the syringe, without leaking injectable solution or air at the connection between the plunger and the needle. III. Technical Standards for Needles: These include 8 standards: 1. Must be free of pyrogens and toxins. 2. The surface of the needle must be smooth, clean, and free of impurities when viewed with the naked eye. 3. The needle body must be made of stainless steel, with sufficient mechanical strength and not break or bend under normal use conditions. 4. The needle tip must be sharp, without burrs or other defects. 5. The needle shaft must be made of a material suitable for its intended use; if the needle shaft is made of plastic, it must be colored according to international standards. 6. The surface of the needle shaft must not have any manufacturing defects. 7. The connection between the needle and the syringe must be strong and not break or detach under normal use conditions. 8. There must be a protective cap for the needle tip. IV. Technical Standards for Packaging: These include 3 standards: 1. The packaging unit must clearly indicate all components: type of syringe, manufacturer name and address, sterilization status, volume, needle size, needle length, production lot, manufacturing date, expiration date. For imported products, there must be a supplementary label in Vietnamese that provides detailed information similar to domestically produced products. Product name... 2. Each syringe is packaged separately in a blister pack. 3. The shelf life of the finished product must be at least 24 months from the date of receipt. V. Other Standards: 1. The manufacturer must meet ISO 13485 and ISO 9001 quality management standards.

TTYT KV Lương Sơn

1 ml syringe

100

Female

1 ml Syringe - The 1ml syringe is made from transparent, smooth, non-warped medical-grade plastic. It has clear volume markings. - The plunger features a notched design to ensure complete drug delivery, achieving a dead space of ≤ 0.03ml. The plunger also prevents the entry of air and injected solutions. - The needle is made of stainless steel, sharp, and with a 3-bevel tip. The needle size is 26Gx1/2". The needle hub has color coding to differentiate between different sizes according to international standards and is securely attached to the needle shaft to prevent leakage and ensure safe use. - The product is sterilized using Ethylene Oxide (E.O) gas. It includes a CE certificate issued by an accredited organization/agency, complying with TCVN 5903:1995, ISO 11135, or ISO 13485 standards (or equivalent). The certificates must be issued by accredited organizations/agencies.)

TTYT KV Lương Sơn

5 ml syringe

2.100

Female

- 5ml capacity cylinder, made from transparent, smooth, non-warping, virgin medical plastic with no burrs. Clear capacity division lines. - There is a scale for maximum suction capacity up to 6ml - The plunger has a notch to break for destruction, no burrs. - Needle made of stainless steel, sharp, beveled on 3 edges. Needles sizes 23Gx1", 25Gx1". The colored needle guide helps distinguish needle sizes according to international standards and is tightly attached to the needle body to prevent leakage and is safe to use. Have certificates of meeting CE standards, TCVN 5903:1995, sterilization standards EN ISO 11135: 2014, ISO 14001:2015, EN ISO 13485 (Certificates of the above standards must be provided by a third party)

TTYT KV Lương Sơn

10 ml syringe

100

Female

- The 10ml syringe is made from transparent, smooth, non-warped, and three-way-free medical-grade plastic. It has clear volume markings. - The plunger can draw up to a maximum of 12ml, with the smallest volume marking ≤0.2ml. - The plunger has a notched design for easy disposal, and does not have three wings. - The needle is made of stainless steel, sharp, and bevelled on three sides. Available in sizes 23Gx1" and 25Gx1". The needle shaft features color-coded markings to differentiate between sizes according to international standards, and is securely attached to the needle body to prevent leakage and ensure safe use. - Includes CE certification from an organization/agency approved by the European Commission (EC), TCVN 5903:1995 standard, EN ISO 11135:2014 sterilization standard, and EN ISO 13485:2016 (Certificates for these standards must be provided by a third party).

TTYT KV Lương Sơn

Needle 14-16G

100

Female

Needles: 18Gx1/2", 20Gx1/2", 23G x 1" – Pack includes needles with color-coded markings for easy identification. Includes CE certification from a recognized organization, and ISO 11135 sterilization standards (Certifications must be issued by recognized organizations). – Origin: G7

TTYT KV Lương Sơn

Shockproof box

28

Female

Material: 201 Stainless Steel Dimensions: 32 x 16.5 x 7 cm

TTYT KV Lương Sơn

Garo wire

56

Female

The product is made from a flexible rubber material that stretches well. It features two-sided adhesive strips for secure attachment, and the adhesive strips are durable and easy to use.

TTYT KV Lương Sơn

Parafin oil

1

Cahi

Liquid, transparent, odorless.

TTYT KV Lương Sơn

Hand sanitizer solution (500ml bottle)

1

Bottle

Chlorhexidine Digluconate 4% (w/w) and additives and skin conditioners (Glycerine, Alcohol Ethoxylates, Alkyl Polyglycoside, Aloe Vera, Cocamide Diethanolamine, Vitamin E, Cocamidopropyl Betaine, Polyquatium 7...) are enough for 100%. - Meets standards: EN 1500; ISO 13485; ISO 9001 - Meets skin irritation test at a GLP standard unit 500ml bottle - Tested for the ability to quickly kill 6 strains of bacteria: Staphylococcus aureus, Pseudomonas aeruginosa, Shigella flexneri, Bacillus subtilis, Candida albicans, Mycobacter tuberculosis within 30 seconds and 03 minutes of contact.

TTYT KV Lương Sơn

Disinfectant 2.5g

100

Tablet

- Effervescent tablets dissolve quickly in water, used to disinfect surfaces, fabrics, kill gram-negative & gram-positive bacteria, including Methicillin-resistant Staphylococcus (MRSA) according to EN14561 standards, pH: 5.0 - 6.5 - 1 tablet weighs 5g with ingredients: active ingredient Troclosense Sodium 50% equivalent to 2.5g/tablet, Apidic acid 1.2g/tablet equivalent to 24%. weight of 1 pill - Meets standards: ISO13485, CFS, GMP

TTYT KV Lương Sơn

Cloramin B

130

Kg

Sodium benzensulfochloramine with formula C6H5SO2NClNa.2H20. Used to disinfect surfaces and treat water. In chloramin B, 25% is active chlorine. Effective in killing broad-spectrum bacteria, spores, fungi, viruses up to 99.9% - Product type: Standard - Appearance: White powder with glitter - Purity %: Minimum 99 - Active chlorine ppm %:Minimum 25 - PH value%:9-11 - Iron ppm %:Max 5ppm - Heavy metals ppm %:Max 5ppm Ingredients: Sodium benzensulfoChloramine Content: - Purity: Min 99% - Active Chlorine min 27% - NaOH max 0.8% - Maximum Pb content 0.02% - Maximum As content 0.001 mg/l. Appearance: White powder, with a characteristic odor. 25kg box

TTYT KV Lương Sơn

Permethrin 50 EC

100

Liter

Active ingredient concentration: Permethrin 50% (cis/trans isomer ratio of Technical Permethrin: 25:75); - Product form: Liquid; - Diluent: Water; - Application method: Residual spraying.

TTYT KV Lương Sơn

Epidemic clothes

50

Set

Clothes, hats, shoe bags, gloves, glasses

TTYT KV Lương Sơn

Automatic temperature monitoring device for refrigerated chains with sensor cables (Fridge-tag 2E)

5

Pieces

1. Electronic temperature monitor with USB port 2. External dimensions: 128 x 75 x 19 mm 3. Screen size: 95 x 27 mm 4. Weight: 107 g 5. Operating temperature: -40°C to +60°C 6. Standards: CE, EMC, ROHS, REACH, PQS standards 7. Displayable temperature range: -10°C to +55°C 8. Alarm temperature range: -35°C to +55°C, resolution 0.1°C 9. Alarm alarm time: 1 minute - 23 hours 59 minutes 10. Alarm type: Visual 11. Memory space: 30 days on display 12. Non-replaceable Lithium battery 13. Operating time: up to 5.5 years (0.5 years of storage and 5 years of use)

TTYT KV Lương Sơn

Freeze-tag electronic freezing indicator

17

Pieces

1. Operating temperature range: -30°C to +50°C 2. Accuracy: Highly reliable, allowable error ranges from 0.50C to 10C 3. Smallest division: The smallest division is usually 0.50C or 10C, ensuring clear observation of the temperature range from 20C - 80C 4. Dimensions: 165 x 25 x 10mm 5. Plastic outer shell is easy to clean and use.

TTYT KV Lương Sơn