Request a quote for General Ultrasound Machine

General ultrasound machine

1

Female

General Requirements: - Quantity: 1 set - Main machine manufactured from 2025 onwards, probes and accessories manufactured from 2024 onwards, 100% new - Main machine meets ISO 13485, EU or EC or equivalent quality standards - Power supply: Compatible with Vietnamese power supply - Working environment: + Maximum temperature up to ≥ 300°C + Maximum humidity up to ≥ 75% - Origin of main machine: Countries in the OECD (Organization for Economic Co-operation and Development) Basic requirements for supply configuration: Main machine: 1 Convex multi-frequency probe 1 Linear multi-frequency probe 1 Multi-frequency cardiac probe Continuous Doppler ultrasound software User manual (English + Vietnamese): 1 set Accessories purchased in Vietnam Black and white thermal printer with 1 roll of paper: 1 piece Computer: 1 piece Color printer: 1 piece 1KVA online UPS: 1 piece Basic technical specifications: - Color Doppler ultrasound machine for examination of the abdomen, cardiovascular system, gynecology, urology, pediatrics, newborns, small superficial areas, musculoskeletal system, etc. - Must have at least two scanning modes: Convex electronic; Linear electronic; Microconvex electronic, sector electronic, two-plane (including 2 convex-convex and convex-linear cuts), matrix probe. 1. Main machine: System parameters - Cart type design - Number of probe ports (excluding pen probes): ≥ 3 ports - Internal hard drive capacity: ≥ 500 GB - CINE memory: ≥ 770 MB or ≥ 63,000 images - TGC and character keypad: Touchscreen control - Includes a gel warmer - Maximum image depth display: ≥ 40 cm - Number of digital processing channels: ≥ 7,000,000 channels - Frame rate: ≥ 880 frames/second - System dynamic range: ≥ 320 dB - Frequency range: ≤ 3.5 - ≥ 22 MHz depending on the probe - Gray scale: ≥ 256 levels - Automatic image quality optimization - Multi-directional ultrasound beam transmission and reception (complex spatial imaging) up to ≥ 9 scan angles or use multiple ultrasound beams in combination to reduce artifacts, increase image resolution and sensitivity. - High-resolution ultrasound image with at least 6 levels of noise reduction. 2. Display: - Display screen: + Screen size ≥ 22 inches + Resolution: ≥ 1920 x 1080 pixels 3. Control panel and user interface - Touchscreen control panel, size ≥ 10.4 inches 4. Probes Convex multi-frequency probe Application: Abdomen, uterus, vagina, blood vessels, urology Frequency range: ≤ 1 – ≥ 6 MHz Number of transducers: ≥ 160 Field of view (maximum): ≥ 70° Linear multi-frequency probe Application: Blood vessels, small parts. Frequency range: ≤5.0 - ≥12.0 MHz Number of transducers: ≥ 192 Field of view (maximum): ≥ 38 mm Multi-frequency cardiac probe Application: Heart Frequency range: ≤ 1- ≥ 5 MHz Number of transducers: ≥ 64 Field of view (maximum): ≥ 120 degrees Minimum operating modes: - B-mode, Harmonic imaging or pulsed wave, M-mode, Color Doppler mode, Power Doppler mode, Doppler pulse mode, Continuous Doppler mode Scanning parameters: B-mode scanning parameters + Gain: from 0 to ≥ 80 dB + Dynamic range: approximately ≤ 40 - ≥ 90 dB + Optional frequency (with one probe and depending on the probe) up to a maximum of ≥ 5 types + Average frame or stability ≥ 8 steps + Line density: ≥ 5 steps + Noise filtering: ≥ 6 levels + Gray scale: ≥ 7 levels M-mode scanning parameters + Adjustable gain: Yes + Adjustable scan speed: Yes Color flow mode scanning parameters + Repetition frequency (PRF): ≤ 0.1 – ≥ 19.8 kHz + Average frame or stability ≥ 7 steps + Package size: ≤ 10 - ≥ 20 (depending on the probe and application) or adjustable at least 3 levels: Large, Medium, Small + Background line: Yes + Optional frequency (with one probe and depending on the probe) up to a maximum of ≥ 5 steps or frequency range selection with all types of probes): ≤1.9- ≥ 5MHz, (equivalent to ≥ 12 steps) + Line density: ≥5 steps + Color map (including speed map) ≥ 20 types or color code ≥ 15 types + Filtering: ≥ 4 levels (steps), depending on the probe Doppler pulse mode scanning parameters + Repetition frequency (PRF): ≤ 0.5 – ≥ 26.5 kHz + Filtering (depending on the probe and application): ≤ 6- ≥ 5000 Hz or adjustable with ≥ 12 steps + Colorization: Yes + Phase inversion: Yes + Background line change: Yes Doppler energy mode scanning parameters + ≥ 15 color maps + Repetition frequency (PRF): ≤ 0.1 – ≥ 19 kHz Continuous Doppler mode scanning parameters + Adjustable gain range (amplification): ≥ 60 dB + Speed scale: maximum ≥ 10 m/s + Repetition frequency (PRF): ≤ 1.5 to ≥ 40 kHz Measurement functions: + Obstetrics measurement/calculation + Gynecology measurement/calculation + Blood vessel ultrasound measurement/calculation + Urology measurement/calculation + Cardiac ultrasound measurement/calculation + Upgrade capability: The ability to perform elastography quantification using Convex and Linear probes provided in the configuration is available. Units of measurement: Kpa, m/s or both Connection specifications + Connection standard: DICOM 3.0 + Connectivity: HDMI or DVI-D, USB, Ethernet connection 5. Connection Specifications  Connection standard: DICOM 3.0  Connectivity: HDMI or DVI-D, USB, Ethernet connection Accessories: Computer + CPU: Core i3 or higher + RAM: ≥ 4GB + Hard drive: ≥ 200 GB + Keyboard, optical mouse + Computer monitor, size ≥ 21” Color printer  Resolution: ≥ 5760 x 1440 dpi  Printing speed: ≥ 15 pages/minute Thermal black and white printer  Resolution: ≥ 300 dpi  Thermal printing

Traditional Medicine Hospital and Rehabilitation of Phu Tho Province