Invitation To Bid ( ITB, Tender Notice)

Construction

Find: 12:32 22/07/2024
Note: DauThau.info automatically determines that this is a bidding package only for micro and small contractors (according to the law on enterprises) participating in the bidding based on Clause 2, Article 7 of Decree No. 24/2024/NĐ-CP of the Government
Notice Status
Published
Public procurement field
Civil Works
Name of project
Construction of the headquarters of the Military Command of Phu Thuong ward
Bidding package name
Construction
Contractor Selection Plan ID
Spending category
Investment and Development Spending
Domestic/ International
Domestic
Capital source details
District budget
Range
Within the scope of the Law on Bidding
Contractor selection method
Single Stage Single Envelope
Contract Type
All in One
Contract Period
To view full information, please Login or Register
Contractor selection methods
Open bidding
Contract Execution location
Time of bid closing
08:00 31/07/2024
Validity of bid documents
60 days
AI-classified field
Approval ID
221/QĐ-QLDA
Approval date
19/07/2024 06:31
Approval Authority
Ban QLDA ĐTXD quận Tây Hồ
Approval Documents

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files. To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

Participating in tenders

Bidding form
Online
Tender documents submission start from
09:03 22/07/2024
to
08:00 31/07/2024
Document Submission Fees
330.000 VND
Location for receiving E-Bids
To view full information, please Login or Register

Bid award

Bid opening time
08:00 31/07/2024
Bid opening location
https://muasamcong.mpi.gov.vn
Price Tender value
To view full information, please Login or Register
Amount in text format
To view full information, please Login or Register
Bid Opening Result
See details here . If you want to receive automatic bid opening notification via email, please upgrade your VIP1 account .
Bid award
See details here . If you want to receive automatic contractor selection results via email, please upgrade your VIP1 account .

Bid Security

Notice type
Letter of guarantee or Certificate of guarantee insurance
Bid security amount
50.000.000 VND
Amount in words
Fifty million dong

Tender Invitation Information

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files.
To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

List of consulting units who have participated in the package

# Unit name Role Address
1 MINH KHANH CONSTRUCTION AND TRADE CONSULTING JOINT STOCK COMPANY Technical design consultancy, construction drawing design, estimation Số 75, ngách 322/95/29, tổ 13 phường Mỹ Đình 1, quận Nam Từ Liêm, TP Hà Nội
2 EC VIET NAM CONSULTANT INVESTMENT JOINT STOCK COMPANY Consulting on technical design verification, construction drawing design, estimation Số nhà 37N5 tổ 10 ngõ 58 phố Triều Khúc, Phường Thanh Xuân Nam, Quận Thanh Xuân, Thành phố Hà Nội, Việt Nam
3 LAM GIANG CONSTRUCTION CONSULTING AND PROJECT MANAGEMENT JOINT STOCK COMPANY Consulting for setting up E-HSMT Số 18, ngách 575/22 phố Kim Mã, phường Ngọc Khánh, quận Ba Đình, Hà Nội
4 JAPAN - VIET CONSTRUCTION INVESTMENT AND TRADING JOINT STOCK COMPANY E-HSMT . appraisal consulting P420 khu tập thể ban vật giá Chính phủ, phường Cống Vị, quận Ba Đình, Hà Nội
5 LAM GIANG CONSTRUCTION CONSULTING AND PROJECT MANAGEMENT JOINT STOCK COMPANY E-HSDT assessment consulting Số 18, ngách 575/22 phố Kim Mã, phường Ngọc Khánh, quận Ba Đình, Hà Nội
6 JAPAN - VIET CONSTRUCTION INVESTMENT AND TRADING JOINT STOCK COMPANY Consultancy on appraisal of contractor selection results P420 khu tập thể ban vật giá Chính phủ, phường Cống Vị, quận Ba Đình, Hà Nội

Requirements for main construction equipment

Number Type of device and device characteristics Minimum quantity required
1
Ô tô tự đổ ≥5T: Còn sử dụng tốt; Kèm theo giấy đăng ký và đăng kiểm còn hiệu lực
1
2
Máy đào dung tích gầu ≥0,8m3: Còn sử dụng tốt; Kèm theo kiểm định còn hiệu lực
1
3
Máy toàn đạc: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
4
Máy thủy bình: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
5
Máy ép cọc: Còn sử dụng tốt; Kèm theo hóa đơn và kiểm định còn hiệu lực
1
6
Máy hàn điện xoay chiều: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
7
Máy trộn bê tông dung tích ≥250l: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
8
Máy cắt uốn sắt: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
9
Máy trộn vữa 150l Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
10
Máy đầm dùi Còn sử dụng tốt; Kèm theo bản sao hóa đơn
2
11
Máy đầm bàn: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
2
12
Máy đầm cóc: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
13
Máy khoan bê tông: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
2
14
Máy phát điện: Còn sử dụng tốt; Kèm theo bản sao hóa đơn
1
15
Phòng thí nghiệm vật liệu xây dựng hợp chuẩn: Bản chụp được chứng thực giấy phép kinh doanh và quyết định của Bộ Xây dựng về việc công nhận các phép thử của phòng thí nghiệm xây dựng hợp chuẩn. Nếu trường hợp đi thuê, Nhà thầu phải ký hợp đồng nguyên tắc thí nghiệm vật tư, vật liệu, kiểm định chất lượng công trình với đơn vị có năng lực kinh nghiệm, uy tín và đã có quyết định của Bộ Xây dựng về việc công nhận các phép thử của phòng thí nghiệm xây dựng hợp chuẩn
1

List of construction items:

Form No. 01A. Bill of Quantities:

Number Job Description Bidding Amount Calculation Unit Technical requirements/Main technical instructions Note
1
Ván khuôn gỗ. Ván khuôn móng băng, móng bè, bệ máy
1.3613
100m2
2
Đổ bê tông thủ công bằng máy trộn, bê tông móng, chiều rộng <= 250 cm, đá 1x2, mác 250, PCB30
31.0014
m3
3
Công tác gia công lắp dựng cốt thép. Cốt thép cổ cột, đường kính cốt thép <= 10mm, chiều cao <= 6m
0.0447
tấn
4
Công tác gia công lắp dựng cốt thép. Cốt thép cổ cột, đường kính cốt thép > 18mm, chiều cao <= 6m
0.4947
tấn
5
Ván khuôn gỗ. Ván khuôn cổ cột
0.1267
100m2
6
Đổ bê tông thủ công bằng máy trộn, bê tông cổ cột, đá 1x2, mác 250, PCB30
0.7406
m3
7
Xây gạch không nung, xây móng, chiều dày <= 33cm, vữa XM mác 75, PCB30
7.8283
m3
8
Ván khuôn gỗ. Ván khuôn xà dầm, giằng
0.1971
100m2
9
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 10mm, chiều cao <= 6m
0.0431
tấn
10
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 18mm, chiều cao <= 6m
0.222
tấn
11
Đổ bê tông thủ công bằng máy trộn, bê tông xà dầm, giằng nhà, chiều cao <= 6m, đá 1x2, mác 200, PCB30
2.1685
m3
12
Đào móng bể rộng >1 m, sâu >1 m, đất cấp II (10% NC)
1.8468
m3
13
Đào móng bể, chiều rộng móng <=6 m, bằng máy đào <=0,8 m3, đất cấp II (90% bằng máy)
0.1662
100m3
14
Đổ bê tông thủ công bằng máy trộn, bê tông lót móng bể, đá 2x4, mác 100, PCB30
1.026
m3
15
Ván khuôn gỗ. Ván khuôn lót móng bể
0.0184
100m2
16
Công tác gia công lắp dựng cốt thép. Cốt thép móng, đường kính cốt thép <= 10mm
0.1504
tấn
17
Công tác gia công lắp dựng cốt thép. Cốt thép móng, đường kính cốt thép <= 18mm
0.5066
tấn
18
Ván khuôn gỗ. Ván khuôn móng cột, móng vuông, chữ nhật
0.062
100m2
19
Đổ bê tông thủ công bằng máy trộn, bê tông móng, chiều rộng > 250 cm, đá 1x2, mác 200, PCB30
1.9268
m3
20
Xây gạch không nung, xây bể chứa, vữa XM mác 75, PCB30
4.7215
m3
21
Ván khuôn gỗ. Ván khuôn xà dầm, giằng
0.0759
100m2
22
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 10mm, chiều cao <= 6m
0.0112
tấn
23
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 18mm, chiều cao <= 6m
0.072
tấn
24
Đổ bê tông thủ công bằng máy trộn, bê tông xà dầm, giằng nhà, chiều cao <= 6m, đá 1x2, mác 200, PCB30
0.8353
m3
25
Công tác gia công, lắp đặt cốt thép bê tông đúc sẵn. Cốt thép tấm đan, hàng rào, cửa sổ, lá chớp, nan hoa, con sơn
0.171
tấn
26
Ván khuôn gỗ. Ván khuôn lanh tô, lanh tô liền mái hắt, máng nước, tấm đan
0.0806
100m2
27
Đổ bê tông thủ công bằng máy trộn, bê tông lanh tô, mái hắt, máng nước, tấm đan, ô văng, đá 1x2, mác 200, PCB30
1.1568
m3
28
Lắp các loại cấu kiện bê tông đúc sẵn bằng thủ công, trọng lượng <= 100kg
9
1 cấu kiện
29
Láng bể nước, giếng nước, giếng cáp, dày 2cm, vữa XM mác 75, PCB30
5.8752
m2
30
Trát tường trong, chiều dày trát 2cm, vữa XM mác 100, PCB30
24.695
m2
31
Trát tường ngoài, chiều dày trát 2cm, vữa XM mác 75, PCB30
28.864
m2
32
Đánh màu bể nước, bể phốt
5.8752
m2
33
Ngâm nước xi măng( 5kg xi măng /m3)
40.2451
kg
34
Đắp đất nền móng công trình
0.5063
m3
35
Đổ bê tông thủ công bằng máy trộn, bê tông nền, đá 2x4, mác 150, PCB30
13.869
m3
36
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép <= 10mm, chiều cao <= 28m
0.5277
tấn
37
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép <= 18mm, chiều cao <= 28m
1.3189
tấn
38
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép > 18mm, chiều cao <= 28m
0.7211
tấn
39
Ván khuôn gỗ. Ván khuôn cột, cột vuông, chữ nhật
1.5207
100m2
40
Đổ bê tông thủ công bằng máy trộn, bê tông cột, tiết diện cột <= 0,1m2, chiều cao <= 28m, đá 1x2, mác 250, PCB30
9.1378
m3
41
Ván khuôn gỗ. Ván khuôn xà dầm, giằng
1.9396
100m2
42
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 10mm, chiều cao <= 28m
1.0754
tấn
43
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 18mm, chiều cao <= 6m
4.5945
tấn
44
Đổ bê tông thủ công bằng máy trộn, bê tông xà dầm, giằng nhà, chiều cao <= 6m, đá 1x2, mác 250, PCB30
22.0666
m3
45
Ván khuôn gỗ. Ván khuôn sàn mái
4.4785
100m2
46
Công tác gia công lắp dựng cốt thép. Cốt thép sàn mái, đường kính cốt thép <=10mm, chiều cao <= 28m
4.4499
tấn
47
Đổ bê tông thủ công bằng máy trộn, bê tông sàn mái, đá 1x2, mác 250, PCB30
50.8346
m3
48
Công tác gia công lắp dựng cốt thép. Cốt thép lanh tô liền mái hắt, máng nước, đường kính cốt thép <= 10mm, chiều cao <= 28m
0.0546
tấn
49
Công tác gia công lắp dựng cốt thép. Cốt thép lanh tô liền mái hắt, máng nước, đường kính cốt thép > 10mm, chiều cao <= 28m
0.2002
tấn
50
Ván khuôn gỗ. Ván khuôn lanh tô, lanh tô liền mái hắt, máng nước, tấm đan
0.254
100m2

Utilities for you

Bidding information tracking
The Bid Tracking function helps you to quickly and promptly receive email notifications of changes to your bid package "Construction". In addition, you will also receive notification of bidding results and contractor selection results when the results are posted to the system.
Receive similar invitation to bid by email
To be one of the first to be emailed to tender notices of similar packages: "Construction" as soon as they are posted, sign up for DauThau.info's VIP 1 package .

Bidding cost calculator

Costs related to contractors when conducting bidding on public procurement (Article 12 of Decree 24/2024/ND-CP)

Cost type Calculation formula Applicable fees (VND)
Annual account maintenance cost
Bid submission cost
Bid submission cost
Bid winning cost
Electronic bid bond connection cost
Total estimated cost

To view bid costs

You need to Login or Register to view the bidding cost.
Support and Error reporting
Support
What support do you need?
Reporting
Is there an error in the data on the page? You will be rewarded if you discover that the bidding package and KHLCNT have not met the online bidding regulations but DauThau.info does not warn or warns incorrectly.
Views: 9

You did not use the site, Click here to remain logged. Timeout: 60 second