Invitation To Bid ( ITB, Tender Notice)

Construction + Dumping and waste treatment

Find: 15:44 06/05/2025
Notice Status
Published
Public procurement field
Civil Works
Name of project
Drainage and road floor in Thanh Khe Tay ward in 2025
Bidding package name
Construction + Dumping and waste treatment
Contractor Selection Plan ID
Name of Contractor selection plan
Drainage and road floor in Thanh Khe Tay ward in 2025
Spending category
Investment and Development Spending
Domestic/ International
Domestic
Capital source details
city budget
Range
Within the scope of the Law on Bidding
Contractor selection method
Single Stage Single Envelope
Contract Type
All in One
Contract Period
To view full information, please Login or Register
Contractor selection methods
Open bidding
Contract Execution location (After merge)
Contract Execution location (Before merge)
Time of bid closing
16:30 15/05/2025
Validity of bid documents
120 days
Approval ID
E2500188786_2505061357
Approval date
06/05/2025 15:34
Approval Authority
Ủy ban nhân dân quận Thanh Khê
Approval Documents

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files. To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

Participating in tenders

Bidding form
Online
Tender documents submission start from
15:42 06/05/2025
to
16:30 15/05/2025
Document Submission Fees
330.000 VND
Location for receiving E-Bids
To view full information, please Login or Register

Bid award

Bid opening time
16:30 15/05/2025
Bid opening location
https://muasamcong.mpi.gov.vn
Price Tender value
To view full information, please Login or Register
Amount in text format
To view full information, please Login or Register
Bid Opening Result
See details here . If you want to receive automatic bid opening notification via email, please upgrade your VIP1 account .
Bid award
See details here . If you want to receive automatic contractor selection results via email, please upgrade your VIP1 account .

Bid Security

Notice type
Letter of guarantee or Certificate of guarantee insurance
Bid security amount
141.167.000 VND
Amount in words
One hundred forty one million one hundred sixty seven thousand dong

Tender Invitation Information

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files.
To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

List of consulting units who have participated in the package

# Unit name Role Address
1 Công ty Cổ phần Tư vấn và xây dựng Ngọc Hân Technical design consultancy, construction drawing design (for two -step design works), estimates Số 70, đường Ngô Sỹ Liên, phường Hòa Minh, quận Liên Chiểu, thành phố Đà Nẵng
2 LTH.DESIGN CONSTRUCTION CONSULTANT COMPANY LIMITED Consulting on technical design verification, construction drawing design (for two -step design works), estimates Số K393/14, đường Nguyễn Phước Nguyên, phường An Khê, quận Thanh Khê, thành phố Đà Nẵng
3 Công ty TNHH Tư vấn đấu thầu và Quản lý dự án miền Trung Consulting for setting up E-HSMT Số 58/16 đường Dũng Sĩ Thanh Khê, phường Thanh Khê Tây, quận Thanh Khê, thành phố Đà Nẵng
4 Công ty TNHH Tư vấn đấu thầu và Quản lý dự án miền Trung E-HSDT assessment consulting Số 58/16 đường Dũng Sĩ Thanh Khê, phường Thanh Khê Tây, quận Thanh Khê, thành phố Đà Nẵng

Requirements for main construction equipment

Number Type of device and device characteristics Minimum quantity required
1
Máy ủi (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
2
Ô tô tự đổ (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
3
Máy đào (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
4
Máy lu (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
5
Máy phun nhựa (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
6
Máy tưới nước (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1
7
Máy rải (Thông số kỹ thuật của nhà sản xuất, đáp ứng yêu cầu sử dụng tại hiện trường, biện pháp thi công và tiến độ thi công nhà thầu đề xuất)
1

List of construction items:

Form No. 01A. Bill of Quantities:

Number Job Description Bidding Amount Calculation Unit Technical requirements/Main technical instructions Note
1
HẠNG MỤC: K45B, K79, K81 DŨNG SĨ THANH KHÊ
2
Tháo dỡ các cấu kiện bê tông đúc sẵn bằng thủ công, trọng lượng cấu kiện ≤ 150kg
263
cấu kiện
3
Bốc xếp cấu kiện bê tông đúc sẵn trọng lượng ≤ 200kg
39.1
tấn
4
Vận chuyển bằng thủ công 10m khởi điểm - cấu kiện bê tông đúc sẵn trọng lượng ≤ 200kg
39.1
tấn
5
Vận chuyển bằng thủ công 10m tiếp theo - cấu kiện bê tông đúc sẵn trọng lượng ≤ 200kg ( Trên quảng đường trung bình 250m )
39.1
tấn
6
Cắt mặt đường bê tông hiện trạng, chiều dày mặt đường ≤ 14cm
2.7336
100m
7
Phá dỡ kết cấu bê tông không cốt thép bằng búa căn khí nén 3m3/ph
6.0112
m3
8
Bốc xếp Vận chuyển phế thải các loại
6.0112
m3
9
Vận chuyển bằng thủ công 10m tiếp theo - Vận chuyển phế thải các loại ( Trên quảng đường trung bình 250m )
6.0112
m3
10
Đào bùn lẫn rác trong mọi điều kiện bằng thủ công
33.1026
m3
11
Vận chuyển bùn lẫn rác tiếp 10m bằng thủ công ( Trên quảng đường trung bình 250m )
33.1026
m3
12
Đào xúc đất để đắp hoặc đổ ra bãi thải, bãi tập kết bằng máy đào 0,4m3 - Cấp đất II
0.5475
100m3
13
Vận chuyển đất bằng ô tô tự đổ 5T, phạm vi ≤1000m - Cấp đất II
0.5475
100m3
14
Vận chuyển đất; phế thải 4km tiếp theo bằng ô tô tự đổ 5T, trong phạm vi ≤5km
0.5475
100m3/1km
15
Vận chuyển đất, phế thải 5km tiếp theo bằng ô tô tự đổ 5T, ngoài phạm vi 5km
0.5475
100m3/1km
16
Đào móng cột, trụ, hố kiểm tra bằng thủ công, rộng ≤1m, sâu ≤1m - Cấp đất II
31.8594
1m3
17
Đắp đất nền móng công trình, nền đường bằng thủ công
18.2186
m3
18
Bốc xếp đất các loại
13.6408
m3
19
Vận chuyển bằng thủ công 10m khởi điểm - đất các loại
13.6408
m3
20
Vận chuyển bằng thủ công 10m tiếp theo - đất các loại ( Chiều dài trung bình 250m )
13.6408
m3
21
Đào xúc đất để đắp hoặc đổ ra bãi thải, bãi tập kết bằng máy đào 0,4m3 - Cấp đất II
13.6408
100m3
22
Vận chuyển đất bằng ô tô tự đổ 5T, phạm vi ≤1000m - Cấp đất II
0.1364
100m3
23
Vận chuyển đất 4km tiếp theo bằng ô tô tự đổ 5T, trong phạm vi ≤5km - Cấp đất II
0.1364
100m3/1km
24
Vận chuyển đất 5km tiếp theo bằng ô tô tự đổ 5T, ngoài phạm vi 5km - Cấp đất II
0.1364
100m3/1km
25
Bê tông lót móng SX bằng máy trộn, đổ bằng thủ công, chiều rộng ≤250cm, M100, đá 4x6, PCB30
3.5496
m3
26
Bê tông mương cáp, rãnh nước SX bằng máy trộn, đổ bằng thủ công, bê tông mác 200, đá 1x2, PCB40
5.73
m3
27
Bê tông sản xuất bằng máy trộn và đổ bằng thủ công, bê tông hố van, hố ga, bê tông M200, đá 1x2, PCB40
10.3953
m3
28
Ván khuôn hố ga, hố thu, mương thoát nước
2.407
100m2
29
Bê tông tấm đan hố ga; tấm đan mương lắp ghép M250, đá 1x2, PCB40 - Đổ bê tông đúc sẵn bằng thủ công (vữa bê tông sản xuất bằng máy trộn)
15.64
m3
30
Gia công, lắp đặt cốt thép pa nen, ĐK ≤10mm
1.2166
tấn
31
Gia công, lắp đặt cốt thép pa nen, ĐK ≤10mm ( Mạ kẽm nhúng nóng )
0.1315
tấn
32
Gia công, lắp đặt cốt thép pa nen, ĐK >10mm ( Mẹ kẽm nhúng nóng )
0.6849
tấn
33
Gia công cấu kiện thép đặt sẵn trong bê tông, KL ≤100kg/1 cấu kiện
9.8198
tấn
34
Lắp đặt cấu kiện thép đặt sẵn trong bê tông, KL ≤100kg/1 cấu kiện
4.8788
tấn
35
Lắp các loại CKBT đúc sẵn bằng thủ công, trọng lượng ≤100kg ( hệ số nhân công 1,5 )
263
1 cấu kiện
36
Lắp đặt tấm chắn rác bê tông cường độ cao KT 300x960x80
68
1 cấu kiện
37
Lắp đặt ống nhựa HDPE đường kính 200mm
0.204
100m
38
Lắp đặt van ngăn mùi Ø200
68
cái
39
Cắt mặt đường bê tông hiện trạng, chiều dày mặt đường ≤ 14cm
3.1868
100m
40
Phá dỡ kết cấu bê tông không cốt thép bằng búa căn khí nén 3m3/ph
16.396
m3
41
Đào móng cột, trụ, hố kiểm tra bằng thủ công, rộng ≤1m, sâu ≤1m - Cấp đất II
20.339
1m3
42
Đào kênh mương, rãnh thoát nước, đường ống, đường cáp bằng thủ công, rộng ≤1m, sâu ≤1m - Cấp đất II
82.524
1m3
43
Đắp đất nền móng công trình, nền đường bằng thủ công
20.895
m3
44
Bốc xếp Vận chuyển phế thải các loại
16.396
m3
45
Vận chuyển bằng thủ công 10m khởi điểm - Vận chuyển phế thải các loại
16.396
m3
46
Vận chuyển bằng thủ công 10m tiếp theo - Vận chuyển phế thải các loại ( Trên quảng đường trung bình 250m )
16.396
m3
47
Bốc xếp đất các loại
81.968
m3
48
Vận chuyển bằng thủ công 10m khởi điểm - đất các loại
81.968
m3
49
Vận chuyển bằng thủ công 10m tiếp theo - đất các loại ( Trên quảng đường trung bình 250m )
81.968
m3
50
Đào xúc đất để đắp hoặc đổ ra bãi thải, bãi tập kết bằng máy đào 0,4m3
0.9837
100m3

Bidding party analysis

Data analysis results of DauThau.info software for bid solicitors Ban Quản lý dự án khu vực Thanh Khê as follows:

  • Has relationships with 201 contractor.
  • The average number of contractors participating in each bidding package is: 5.03 contractors.
  • Proportion of bidding fields: Goods 15.83%, Construction 80.00%, Consulting 2.50%, Non-consulting 0.00%, Mixed 1.67%, Other 0%.
  • The total value according to the bidding package with valid IMP is: 643,506,621,939 VND, in which the total winning value is: 566,780,635,581 VND.
  • The savings rate is: 11.92%.
DauThau.info software reads from national bidding database

Utilities for you

Bidding information tracking
The Bid Tracking function helps you to quickly and promptly receive email notifications of changes to your bid package "Construction + Dumping and waste treatment". In addition, you will also receive notification of bidding results and contractor selection results when the results are posted to the system.
Receive similar invitation to bid by email
To be one of the first to be emailed to tender notices of similar packages: "Construction + Dumping and waste treatment" as soon as they are posted, sign up for DauThau.info's VIP 1 package .

Bidding cost calculator

Costs related to contractors when conducting bidding on public procurement (Article 12 of Decree 24/2024/ND-CP)

Cost type Calculation formula Applicable fees (VND)
Annual account maintenance cost
Bid submission cost
Bid submission cost
Bid winning cost
Electronic bid bond connection cost
Total estimated cost

To view bid costs

You need to Login or Register to view the bidding cost.
Support and Error reporting
Support
What support do you need?
Reporting
Is there an error in the data on the page? You will be rewarded if you discover that the bidding package and KHLCNT have not met the online bidding regulations but DauThau.info does not warn or warns incorrectly.
Views: 11

You did not use the site, Click here to remain logged. Timeout: 60 second