Contact Us
- 0904.634.288, 024.8888.4288
- [email protected]
- Facebook Fanpage: http://fb.com/dauthau.info
- Messenger: http://m.me/dauthau.info
Contact Us
-- You will be rewarded if you detect false warnings! See instructions here!
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent.
To download, please Login or Register
Number | Category | Goods code | Amount | Calculation Unit | Description | Note |
---|---|---|---|---|---|---|
1 | AC Power Supply |
3500/15
|
6 | bộ | P/N: 3500/15 High Voltage ~AC PIM 175-264 VAC 2.3A; 47-63Hz (Bao gồm mặt trước và mặt sau) - Universal Voltage AC : + Input Voltage : 110 to 220 Vac nominal, 85 to 264 Vac rms, 120 to 373 Vac pk .The universal AC Power Supply and Power Input. Module are not compatible with the legacy High Voltage AC or Low Voltage AC units. - High Voltage DC : 88 to 140 Vdc - Low Voltage DC : 20 to 30 Vdc | |
2 | Transient data interface và Transient data interface I/O module |
3500/22M
|
6 | bộ | P/N: 3500/22M (Bao gồm mặt trước và mặt sau) -Power: Consumption : 10.5 Watts -Data: + Front Pane : USB-B + 10Base-T/ 100BaseTX I/O : 10Base-T or 100Base-TX Ethernet, autosensing + 100Base-FX I/O : 100Base-FX Fiber-Optic Ethernet - Outout: Front Panel LEDs + OK LED : Indicates when the 3500/22M is operating properly + TX/RX LED : Indicates when the 3500/22M is communicating with the other modules in the rack + TM LED : Indicates when the 3500 rack is in Trip Multiply mode + CONFIG OK LED: Indicates that the 3500 rack has a valid configuration | |
3 | Keyphasor Module và keyphasor I/O module |
3500/25
|
6 | bộ | P/N: 3500/25 (Bao gồm mặt trước và mặt sau) - Half-height, two-channel module - Accepts up to two transducer signals - 3.2 Watts typical power consumption - Input signal range: * 0.8V to -21.0V (Non-isolated I/O modules) * +5V to -11V (isolated I/O modules) - Two buffered Keyphasor outputs - 504Ω maximum buffered output impedance * -24 VDC, 40 mA maximum per channel power supply | |
4 | Proximitor/ Seismic Monitor và prox/Seismic I/O module |
3500/42M
|
6 | bộ | P/N: 3500/42M (Bao gồm mặt trước và mặt sau) - Input Impedance : Standard I/O is 10 kΩ (Proximitor and acceleration inputs - Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Thrust : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Eccentricity : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Differential Expansion : 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) - Outputs : + Output Impedance :550 Ω + Voltage Compliance (current output): 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω. | |
5 | Tachometer Module và techometer I/O module |
3500/50M
|
6 | bộ | P/N: 3500/50M (Bao gồm mặt trước và mặt sau) - Input signal range : +10.0 V to -24.0 V Signals exceeding this range are limited internally by the module - Input impedance : 20 k Ω (standard), 40 k Ω (TMR),7.15 k Ω (Internal Barrier) - Output Impedance : 550 Ω - Recorder : +4 to +20 mA. Values are proportional to module full-scale range (rpm or rpm/min). Individual recorder values are provided for each channel. - Voltage Compliance (current output): 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω - Resolution : 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range. Update rate approximately 100 ms - RPM/Min Accuracy : ± 20 rpm/min - RPM Accuracy : + Less than 100 rpm = ± 0.1 rpm +100 to 10,000 rpm = ±1 rpm + 10,000 to 99,999 rpm = ± 0.01% of true shaft speed | |
6 | 16 Channel Relay Module và 16 CH Relay MDL |
3500/33
|
6 | bộ | P/N: 3500/33 Relay contacts rated: Max 5A; Max 250VAC Timer relay rated: Max 2A; Max 220VAC (Bao gồm mặt trước và mặt sau) - Standard Relays : Min Switched Current : 100 mA - 5 Vdc - DC Specifications (Resistive Load) : Max Switched Current : 3.0 A - 5 to 30 Vdc, 0.3 A - 48 Vdc, 0.11 A - 125 Vdc. - AC Specifications (Resistive Load) : + Max Switched Current : 3 A + Max Switched Voltage : 250 Vac - Low Current Relays : DC Specifications (Resistive Load) + Min Switched Current : 1 mA @ 1 Vdc + Max Switched Current : 100 mA - 48 Vdc, 5 mA - 125 Vdc. - Relay Contact Life : 10,000 cycles | |
7 | Overspeed Detection Module và overspeed Detection I/O Module |
3500/53
|
2 | Bộ | P/N: 3500/53 (Bao gồm mặt trước và mặt sau) - Input Impedance: 20 k Ω. - Transducers: Bently Nevada 3300 8 mm Proximitor 3300 16 mm HTPS, 7200 5 mm, 8 mm, 11 mm, and 14 mm Proximitor; 3300 RAM Proximitor, or Magnetic pickups - Output Impedance: 550 Ω - Transducer Power Supply: -24 Vdc, 40 mA maximum. - Recorder: +4 to +20 mA. Values are proportional to module full-scale range (rpm). Module operation is unaffected by short circuits on recorder output. - Resolution: 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range. Update rate approximately 100 ms. - Relays Type: Single-pole, double-throw (SPDT) relays. - Max switched power: DC: 120 W AC: 600 VA. - Max switched current: 5A - Contact Life: 100,000 @-5 A, 24 Vdc or 120 Vac. | |
8 | Position Monitor và position I/O Module |
3500/45
|
2 | bộ | P/N: 3500/45 (Bao gồm mặt trước và mặt sau) - Input Impedance : 1 MΩ (DC LVDT inputs) 10 kΩ (Proximitor* or RPT inputs) 137 kΩ (AC LVDT inputs) 200 kΩ (Rotary Potentiometer inputs) - Sensitivity : + Thrust : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) + Differential Expansion : 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) + Ramp Differential Expansion : 0.394 V/mm (10 mV/mil), 0.787 V/mm (20 mV/mil), 3.937 V/mm (100 mV/mil) or 7.874 V/mm (200 mV/mil) + Rotary Potentiometer Valve Position : 41 mV/degree rotation + Rotary Position Transducer (RPT) Valve Position : 140 mV/deg rotation, 70 mV/deg rotation or 50 mV/deg rotation. - Transducer Power Supply: + Proximitor or RPT : -24 Vdc + DC LVDT : +15 Vdc + AC LVDT : 2.3Vrms 3400Hz sine wave + Rotary Potentiometer : -12.38 Vdc + Recorder : +4 to +20 mA Values are proportional to monitor full-scale + Voltage Compliance (current output) : 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω. | |
9 | Industrial Communication |
ES-1026
|
2 | cái | P/N: ES-1026 - Model : ES-1026 - Number of interfaces : 26 - Switch type : 100-megaswitch - Transfer speed : 100Mbps10Mbps - Enthernet : 24 port (RJ45) - Operating temperature: 0 – 60 0C - Input voltage : 110 -220VDC/ 110-240VAC, 47 – 63Hz. | |
10 | Industrial Ethernet Switch |
EDS-205A
|
2 | cái | P/N: EDS-205A - Switch Properties: + MAC Table Size : 1K + Packet Buffer Size : 384 kbits + Processing Type : Store and Forward - Power Parameters : + Connection: 1 removable 4-contact terminal block(s) + Input Current : EDS-205A/205A-T: 0.09 A @ 24 VDC EDS-205A-M-SC/M-ST/S-SC Series: 0.1 A @ 24 VDC + Input Voltage: 12/24/48 VDC, Redundant dual inputs + Operating Voltage : 9.6 to 60 VDC - IP Rating : IP30 - Package Contents: + Device : 1 x EDS-205A Series switch + Documentation : 1 x quick installation guide, 1 x warranty card | |
11 | Switching power supply |
Weidmuller PRO MAX 72W
|
2 | cái | Type: PRO MAX 72W 24V 3A Input: 100-240V~; 2.0-1.0A Operational Voltage: 85-277V~/ 80-370VDC Output: 24VDC 3A - Version : Power supply, switch-mode power supply unit, 24 V - Operating temperature, max: 70 °C - Operating temperature, min : -25 °C - Storage temperature, max : 85 °C - Storage temperature, min : -40 °C - AC current consumption : 1 A - 230 V AC / 1.5 A - 115 V AC - DC current consumption : 1A - 370 VDC / 1,5A - 120 VDC - Inrush current : max. 15 A - Output voltage : 24 V - Rated output voltage : 24 V DC ± 1 % - Protection degree :IP20 - Status indication : LED red/green and relay (≥21.6 V DC LED green, relay on/ ≤20.6 LED red, relay off) - Altitude : 3000m, 3000-6000m derating, @ 6000m 75% Load | |
12 | Module cách ly |
CZ3035
|
5 | cái | Type: CZ3035 Power supply:20-35VDC Input: 4-20mA Output: channel 1: 4-20mA, R≤300Ω channel 2: 4-20mA, R≤300Ω - Field apparatus : 2-wire transmitter,3-wire transmitter, current source - Degree of protection : IP20 - Ambient temperature : -20℃~+60℃ - Flammability rating : UL94/V0 - Conductor cross section solid range : 0.5~2.5mm² - Conductor cross section flexible range : 0.5~2.5mm² - Conductor cross section AWG min : 12 - Conductor cross section AWG max : 24 - Mounting type : DIN35mm | |
13 | Electromech Relay |
No.: 2961192
|
30 | cái | Type: PLC-BSC-24DC/21-21 No.: 2961192 Input: Un=24VDC Out: MAX. 250VAC/2X6A - Coil resistance : 1440 Ω ±10 % (at 20 °C) - Number of Pins : 8-pins - Country/Region of Manufacture: Germany - UPC: Does not apply - EAN: Does not apply - Model: Power Relay - Type: General Purpose Relay - Voltage: 24VDC - Contact material : AgNi - Maximum switching voltage : 250 V AC/DC - Minimum switching voltage : 5 V (at 10 mA) - Min. switching current : 10 mA (At 5 V) - Maximum inrush current : 25 A (20 ms) - Limiting continuous current : 8 A | |
14 | Quint Power |
QUINT-PS/1AC/24DC/10
|
2 | cái | QUINT-PS/1AC/24DC/10 Order-No.: 2866763 Input: 100-240VAC/50-60Hz/4.0-1.7A 110-250VDC/50-60Hz/3.4-1.5A Operation Voltage: 85-264VAC/90-350VDC Output: 24VDC/10A (Boost 15A; 60A/12ms) - Degree of protection : IP20 - Net weight : 1.1 kg - Insulation voltage output / PE : 500 V DC (routine test) - Feedback voltage resistance : max. 35 V DC |
Data analysis results of DauThau.info software for bid solicitors Công ty Nhiệt điện Duyên Hải Chi nhánh Tổng Công ty Phát điện 1 as follows:
- Has relationships with 698 contractor.
- The average number of contractors participating in each bidding package is: 4.87 contractors.
- Proportion of bidding fields: Goods 69.58%, Construction 1.70%, Consulting 0.85%, Non-consulting 27.87%, Mixed 0.00%, Other 0%.
- The total value according to the bidding package with valid IMP is: 5,115,664,171,216 VND, in which the total winning value is: 4,240,667,968,378 VND.
- The savings rate is: 17.10%.
If you are still not our member, please sign up.You can use your account on DauThau.info to log in to Dauthau.Net, and vice versa!
Only 5 minutes and absolutely free! Your account can be use on all over our ecosystem, including DauThau.info and DauThau.Net.
Security Code
Similar goods purchased by Bid solicitor DUYEN HAI THERMAL POWER COMPANY:
No similar goods purchased by the soliciting party were found.
Similar goods purchased by other Bid solicitors excluding DUYEN HAI THERMAL POWER COMPANY:
No similar goods have been found that other Bid solicitors have purchased.
Similar goods for which the bidding results of the Ministry of Health have been announced:
No similar goods have been found in the bidding results of the Ministry of Health.