Contact Us
- 0904.634.288, 024.8888.4288
- [email protected]
- Facebook Fanpage: http://fb.com/dauthau.info
- Messenger: http://m.me/dauthau.info
Contact Us
-- You will be rewarded if you detect false warnings! See instructions here!
Note: DauThau.info automatically determines that this is a bidding package only for micro and small contractors (according to the law on enterprises) participating in the bidding based on Clause 3, Article 6 of Decree No. 63/2014/ND-CP of the Government
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent. To download, please Login or Register
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent.
To download, please Login or Register
Number | Job Description Bidding | Amount | Calculation Unit | Technical requirements/Main technical instructions | Note |
---|---|---|---|---|---|
19 | Lắp đặt đinh bắn tôn, khoan neo bản mã ôm ống | 48 | cái | ||
20 | Lắp đăt tê nhựa uPVC nối bằng phương pháp măng sông, đường kính tê d=110mm | 12 | cái | ||
21 | Lắp đặt nút bịt nhựa miệng bát nối bằng p/p dán keo - Đường kính 110mm | 12 | cái | ||
22 | Keo Silicone dán ống, xử lý vị trí nối | 12 | hộp | ||
23 | Tấm cao su Silicone dày 5mm chịu nhiệt, dùng làm đệm giảm chấn, chống trơn trượt đường ống và khớp nối. | 1.44 | m2 | ||
24 | Lắp đai neo ống bằng thép tráng kẽm - Đường kính 100mm. | 48 | cái | ||
25 | Keo Dán xây dựng dán viền xung quanh mặt trong và ngoài cửa, Xưởng PX2, kho vật tư | 10 | hộp | ||
26 | Cắt sàn bê tông bằng máy - Chiều dày ≤10cm, để xử lý thấm, tạo khe rãnh thoát nước ra ngoài, cắm tôn viền khung cửa sổ | 25 | m | ||
27 | Tôn viền chắn nước loại rộng 35cm, dày 0,5 dem màu ghi, dập hình sóng | 8.75 | m | ||
28 | Gia công Vì mái thép để lắp đặt tôn bảo vệ (Bằng thép hộp mạ kẽm 30x60 dày 1,4li, Xưởng PX2, Phòng làm việc lực lượng đi ca C&I | 0.065 | tấn | ||
29 | Lắp dựng xà gồ thép, bằng thép hộp 30x60 dày 1,4 (khung sườn thép), Xưởng PX2, Phòng làm việc lực lượng đi ca C&I | 0.065 | tấn | ||
30 | Lợp mái tôn mái dày 0,45mm | 0.16 | 100m2 | ||
31 | Lắp đặt máng tôn thu nước dày 0,45mm, khổ tôn U500 | 8 | md | ||
32 | Nhân công sửa chữa cửa đi, cửa sổ | 8 | công | ||
33 | Vệ sinh nền sàn trước khi lát gạch | 48 | m2 | ||
34 | Lát nền, sàn - Tiết diện gạch 600*600mm, vữa XM M75, PCB40 | 48 | m2 | ||
35 | Lắp đặt khóa cửa đi, khóa Viêt tiệp, khóa tay nắm gạt (Khóa Việt Tiệp hoặc tương đương) | 3 | bộ | ||
36 | Cắt tường để lắp đặt quạt hút gió | 1.2 | m | ||
37 | Đục để lắp đặt quạt hút | 0.24 | m3 | ||
38 | Lắp đặt quạt hút công nghiệp, đường kính 35cm mã hiệu Quạt Hướng Trục Tăng Áp Wings 350-2 hoặc tương đương | 1 | bộ | ||
39 | Lắp đặt Aptomat 20A | 1 | cái | ||
40 | Sản xuất và lắp đặt cửa sổ nhôm kính, Cửa nhựa lõi thép, (sản phẩm Gdatwindows hoặc tương đương) | 2 | m2 | ||
41 | Tháo dỡ mái tôn , chiều cao ≤28m bị hư hỏng, mục nát, thấm dột, Kho vật tư thu hồi PX4, P2; PX2 | 240 | m2 | ||
42 | Lợp mái tôn mái dày 0,45mm, Kho vật tư thu hồi PX4, P2; PX2 | 2.4 | 100m2 | ||
43 | Keo Silicone chống thấm, chuyên dụng | 6 | hộp | ||
44 | Nhân công sửa chữa cửa sắt bị hỏng, Kho dầu mỡ PX4 | 2 | công | ||
45 | Cắt tường để gia cố tôn chống thấm, Nhà vận hành ESP/FGD | 16 | m | ||
46 | Chèn góc tiếp giáp bằng tôn mái dày 0,45 dem, Nhà vận hành ESP/FGD | 0.064 | 100m2 | ||
47 | Keo Silicone chống thấm, chuyên dụng | 4 | hộp | ||
48 | Đục nhám toàn bộ mặt bê tông, sàn tầng 3, phòng CCR trước khi sử lý chống thấm, Phòng Quản đốc ca; Phòng CCR | 177.6 | m2 | ||
49 | Láng nền, sàn không đánh màu, dày 2cm, vữa XM M100, PCB40, Phòng Quản đốc ca; Phòng CCR | 177.6 | m2 | ||
50 | Quét dung dịch chống sàn sân thượng bằng Sikaproof Membrane, thi công 3 nước, (1 lớp dưới và 2 lớp trên lưới thủy tinh) | 177.6 | m2 | ||
51 | Khoan bê tông bằng máy khoan - Lỗ khoan Fi ≤16mm, để bơm keo chống thấm khe máng cáp, Hầm cáp trạm 220KV, Nhà FGD | 20 | 1 lỗ khoan | ||
52 | Bơm phụ gia Sikagrout 214-11 - bơm vữa khu vực dây điện | 2 | bao | ||
53 | Cắt sàn bê tông bằng máy - Chiều dày ≤20cm, để dẫn nước về hố thu | 40 | m | ||
54 | Đục sàn dẫn nước vào hố thu, khu vực hầm cáp | 0.4 | m3 | ||
55 | Giá cố tấm tôn chắn nước dày 4,5dem, tại cửa cuốn, tôn phẳng, dập khuôn chắn nước, màu Ghi, Ví trí van xả khí Bơm cấp 1B 2B, tầng 1 gian Tua Bin | 0.176 | 100m2 | ||
56 | Bắn keo dán sắt chống thấm chuyên dụng | 2 | hộp | ||
57 | Gia công khung cửa chống bão Bằng thép hộp mạ kẽm 40x80 dày 2li, khung cửa, tầng 2, khu vực van xả khí Bơm cấp 1B, 2B | 0.339 | tấn | ||
58 | Lắp dựng chống bão Bằng thép hộp mạ kẽm 40x80 dày 2li, khung cửa, cửa tầng 2, khu vực van xả khí Bơm cấp 1B, 2B | 0.339 | tấn | ||
59 | Gia công khung cửa chống bão Bằng thép hộp mạ kẽm 30x60 dày 1,4li, Thoang ngang cửa | 0.032 | tấn | ||
60 | Lắp dựng Bằng thép hộp mạ kẽm 30x60 dày 1,4li, Thoang ngang cửa | 0.032 | tấn | ||
61 | Khoan chốt cửa | 16 | 1 lỗ khoan | ||
62 | Lắp đặt bản lề cửa | 12 | bộ | ||
63 | Lắp đặt Bu lông thép M12, để định vị cửa | 12 | bộ | ||
64 | Quét dung dịch chống thấm mái tôn chống thấm mái, xử lý trên đầu mũ đinh toàn bộ mái nhà, Phòng điện và phòng điện phân Hidro | 160 | m2 | ||
65 | Đinh vít bắn tôn | 6 | gói | ||
66 | Lắp dựng, tháo dỡ dàn giáo ngoài, chiều cao ≤16m | 0.6 | 100m2 | ||
67 | Bơm keo chống thấm chuyên dụng ống điều hòa, quạt gió | 4 | bộ | ||
68 | Đục bê tông để lắp đặt ống thoát nước qua tường bị hư hỏng, Phòng thiết bị điện T3 nhà CCB phía sau dãy tủ RCP của MBA; Phòng PLC TT1 | 1.8 | m3 |
Data analysis results of DauThau.info software for bid solicitors NGHI SƠN THERMAL POWER COMPANY as follows:
- Has relationships with 384 contractor.
- The average number of contractors participating in each bidding package is: 2.72 contractors.
- Proportion of bidding fields: Goods 60.10%, Construction 6.06%, Consulting 4.80%, Non-consulting 29.04%, Mixed 0%, Other 0%.
- The total value according to the bidding package with valid IMP is: 940,321,481,696 VND, in which the total winning value is: 795,834,057,897 VND.
- The savings rate is: 15.37%.
If you are still not our member, please sign up.You can use your account on DauThau.info to log in to Dauthau.Net, and vice versa!
Only 5 minutes and absolutely free! Your account can be use on all over our ecosystem, including DauThau.info and DauThau.Net.
Security Code
Similar goods purchased by Bid solicitor NGHI SƠN THERMAL POWER COMPANY:
No similar goods purchased by the soliciting party were found.
Similar goods purchased by other Bid solicitors excluding NGHI SƠN THERMAL POWER COMPANY:
No similar goods have been found that other Bid solicitors have purchased.
Similar goods for which the bidding results of the Ministry of Health have been announced:
No similar goods have been found in the bidding results of the Ministry of Health.