Invitation To Bid ( ITB, Tender Notice)

Tender package No 01: Construction work

Find: 17:30 18/01/2024
Notice Status
Published
Public procurement field
Civil Works
Name of project
Subject house, covered sports practice area and auxiliary items Yen My High School, Yen My district
Bidding package name
Tender package No 01: Construction work
Bid Solicitor
Contractor Selection Plan ID
Spending category
Investment and Development Spending
Domestic/ International
Domestic
Capital source details
Provincial budget
Range
Within the scope of the Law on Bidding
Contractor selection method
Single Stage Two Envelopes
Contract Type
All in One
Contract Period
To view full information, please Login or Register
Contractor selection methods
Open bidding
Contract Execution location (After merge)
Contract Execution location (Before merge)
Time of bid closing
15:00 06/02/2024
Validity of bid documents
90 days
AI-classified field
Approval ID
14/QĐ-THPT
Approval date
15/01/2024 00:00
Approval Authority
Trường THPT Yên Mỹ
Approval Documents

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files. To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

Participating in tenders

Bidding form
Online
Tender documents submission start from
17:27 18/01/2024
to
15:00 06/02/2024
Document Submission Fees
330.000 VND
Location for receiving E-Bids
To view full information, please Login or Register

Bid award

Bid opening time
15:00 06/02/2024
Bid opening location
https://muasamcong.mpi.gov.vn
Price Tender value
To view full information, please Login or Register
Amount in text format
To view full information, please Login or Register
Estimated Tender value
To view full information, please Login or Register
Amount in text format
To view full information, please Login or Register
Bid Opening Result
See details here . If you want to receive automatic bid opening notification via email, please upgrade your VIP1 account .
Bid award
See details here . If you want to receive automatic contractor selection results via email, please upgrade your VIP1 account .

Bid Security

Notice type
Guarantee letter
Bid security amount
500.000.000 VND
Amount in words
Five hundred million dong

Tender Invitation Information

Bidding documents on the Public Procurement System may be infected with viruses or errors, some files require computers using Windows operating systems and need to install Client Agent software (Linux and MacOS operating systems cannot install Client software) to be able to download. Using DauThau.info software, you can check all the above problems as well as preview the total size of the bidding documents to prevent missing files from downloading.
Downloading files directly on the new Public Procurement System requires a computer using Windows operating system and installing Client Agent software (Linux and MacOS operating systems cannot install Client software yet). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use DauThau.info software to download files.
To download, please Login or Register

Files with this icon are not supported by the public procurement system for direct download in normal mode. Visit DauThau.info and select Quick Download mode to download the file if you do not use Windows with Agent. DauThau.info supports downloading on most modern browsers and devices!
In case it is discovered that the BMT does not fully attach the E-HSMT file and design documents, the contractor is requested to immediately notify the Investor or the Authorized Person at the address specified in Chapter II-Data Table in E- Application form and report to the Procurement News hotline: 02437.686.611

List of consulting units who have participated in the package

# Unit name Role Address
1 Công ty TNHH kiến trúc DC Việt Nam và công ty TNHH thương mại Huy Hoàng ViNa Consulting for designing feed, technical design, construction drawing design, estimation
2 CADICO CONSTRUCTION DEVELOPMENT AND DESIGN CONSULTANT JOINT STOCK COMPANY Consulting for Feed design, technical design, construction drawing design, estimation
3 Công ty TNHH xây dựng 85 Hưng Yên Consulting for setting up E-HSMT
4 AN THANH CONSTRUCTION AND INVESTMENT COMPANY LIMITED E-HSMT . appraisal consulting
5 Công ty TNHH xây dựng 85 Hưng Yên E-HSDT assessment consulting
6 AN THANH CONSTRUCTION AND INVESTMENT COMPANY LIMITED Consultancy on appraisal of contractor selection results

Requirements for main construction equipment

Number Type of device and device characteristics Minimum quantity required
1
Máy đào 0,8 - 1,6m3
1
2
Máy ép cọc
1
3
Máy lu bánh thép
1
4
Máy lu rung
1
5
Cần trục ô tô – sức nâng
1
6
Máy đầm bàn
1
7
Máy cắt uốn thép
1
8
Đầm cóc ≥70Kg
1
9
Ô tô tự đổ ≥5T
1
10
Ô tô tải thùng ≥2,5 tấn
1
11
Máy hàn
1
12
Máy thủy bình
1
13
Máy trộn vữa ≥80l
1
14
Máy trộn bê tông ≥ 250l
1
15
Máy đầm dùi
1

List of construction items:

Form No. 01A. Bill of Quantities:

Number Job Description Bidding Amount Calculation Unit Technical requirements/Main technical instructions Note
1
Bình khí chữa cháy CO2 MT3
20
bình
2
Hộp đựng TB PCCC (chất liệu tôn tráng kẽm chống rỉ, sơn phủ màu đỏ tĩnh điện, KT: 600*500*180mm)
6
hộp
3
Bảng nội quy và tiêu lệnh chữa cháy
20
bảng
4
Bộ vật dụng chữa cháy thô sơ (Ba gồm kìm cộng lực, xà beng, rừu, cưa, búa)
1
bộ
5
Quạt hút khói ly tâm 15000 m3/h @550Pa , N=1460V/p; U=380V ( vật tư, bệ BT chân quạt, lắp đặt)
1
quạt
6
Cửa gió 600x400 (phủ bì) + van OBD (vật tư+nhân công lắp đặt)
1
miệng
7
Ống gió GHCL EI 45 KT 750x500mm (đã bao gồm giá đỡ treo ống và công lắp đặt)
20
m
8
Ống gió thường KT 750x500mm (đã bao gồm giá đỡ treo ống và công lắp đặt)
10
m
9
Phụ kiện vật tư
1
10
Tủ Nút ấn điều khiển bằng tay (dừng/mở) điều khiển quạt đặt tại phòng bảo vệ (Tủ cưỡng bức điều khiển quạt)
1
tủ
11
Nhà tổ bộ môn
12
Gia công, lắp dựng, tháo dỡ ván khuôn kim loại, ván khuôn cọc, cột
11.884
100m2
13
Công tác gia công, lắp đặt cốt thép bê tông đúc sẵn. Cốt thép cột, cọc, cừ, xà dầm, giằng, đường kính <= 10mm
3.593
tấn
14
Công tác gia công, lắp đặt cốt thép bê tông đúc sẵn. Cốt thép cột, cọc, cừ, xà dầm, giằng, đường kính <= 18mm
11.027
tấn
15
Công tác gia công, lắp đặt cốt thép bê tông đúc sẵn. Cốt thép cột, cọc, cừ, xà dầm, giằng, đường kính > 18mm
0.165
tấn
16
Gia công cấu kiện thép đặt sẵn trong bê tông, khối lượng một cấu kiện <= 10 kg
3.495
tấn
17
Lắp đặt cấu kiện thép đặt sẵn trong bê tông, khối lượng một cấu kiện <= 10 kg
3.495
tấn
18
Đổ bê tông đúc sẵn bằng thủ công - sản xuất bằng máy trộn. Bê tông cọc cừ, đá 1x2, mác 250, xi măng PCB40
103.732
m3
19
Ép trước cọc bê tông cốt thép bằng máy ép cọc 150T, chiều dài đoạn cọc > 4m, kích thước cọc 25x25cm, đất cấp II
16.504
100m
20
Ép trước cọc BTCT, dài >4m, KT 25x25cm, đất C2 (ép âm hệ số M,NCx1,05)
0.146
100m
21
Nối cọc vuông bê tông cốt thép, KT 25x25cm
225
mối nối
22
Phá dỡ kết cấu bê tông có cốt thép bằng búa căn khí nén 3m3/ph
1.9
m3
23
Vận chuyển đất bằng ôtô tự đổ 5 tấn trong phạm vi <= 1000m, đất cấp III
0.019
100m3
24
Vận chuyển đất bằng ô tô tự đổ 5T 1km tiếp theo trong phạm vi <= 5km, đất cấp III
0.019
100m3
25
Đào móng công trình, chiều rộng móng <= 6m, bằng máy đào 0,8m3, đất cấp II
1.885
100m3
26
Đào đất móng băng bằng thủ công, rộng <= 3m, sâu <= 1m, đất cấp II
20.944
m3
27
Đào móng cột, trụ, hố kiểm tra bằng thủ công, rộng <= 1m, sâu <= 1m, đất cấp II
8.73
m3
28
Ván khuôn gỗ. Ván khuôn móng băng, móng bè, bệ máy
1.588
100m2
29
Ván khuôn gỗ. Ván khuôn móng cột, móng vuông, chữ nhật
1.035
100m2
30
Đổ bê tông thủ công bằng máy trộn, bê tông lót móng, chiều rộng <= 250 cm, đá 4x7, mác 100, xi măng PCB30
12.847
m3
31
Công tác gia công lắp dựng cốt thép. Cốt thép móng, đường kính cốt thép <= 10mm
0.823
tấn
32
Công tác gia công lắp dựng cốt thép. Cốt thép móng, đường kính cốt thép <= 18mm
1.684
tấn
33
Công tác gia công lắp dựng cốt thép. Cốt thép móng, đường kính cốt thép > 18mm
3.774
tấn
34
Bê tông móng, chiều rộng ≤250cm, máy bơm BT tự hành, M250, đá 1x2, PCB40
58.681
m3
35
Ván khuôn gỗ. Ván khuôn cột, cột vuông, chữ nhật
0.256
100m2
36
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép <= 10mm, chiều cao <= 6m
0.055
tấn
37
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép <= 18mm, chiều cao <= 6m
0.85
tấn
38
Công tác gia công lắp dựng cốt thép. Cốt thép cột, trụ, đường kính cốt thép > 18mm, chiều cao <= 6m
0.241
tấn
39
Bê tông cột TD ≤0,1m2, chiều cao ≤6m, máy bơm BT tự hành, M250, đá 1x2, PCB40
1.63
m3
40
Xây gạch không nung 6x10x21, xây móng, chiều dày <= 33cm, vữa XM mác 75, xi măng PCB40
20.622
m3
41
Ván khuôn gỗ. Ván khuôn xà dầm, giằng
0.384
100m2
42
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 10mm, chiều cao <= 6m
0.245
tấn
43
Công tác gia công lắp dựng cốt thép. Cốt thép xà dầm, giằng, đường kính cốt thép <= 18mm, chiều cao <= 6m
0.109
tấn
44
Đổ bê tông thủ công bằng máy trộn, bê tông lót móng, chiều rộng <= 250 cm, đá 4x7, mác 100, xi măng PCB30
0.946
m3
45
Bê tông xà dầm, giằng nhà SX bằng máy trộn, đổ bằng thủ công, chiều cao ≤6m, M250, đá 1x2, PCB40
3.563
m3
46
Đắp đất công trình bằng đầm đất cầm tay 70kg, độ chặt yêu cầu K=0,90
1.404
100m3
47
Đắp cát công trình bằng máy đầm đất cầm tay 70kg, độ chặt yêu cầu K=0,90
1.789
100m3
48
Vận chuyển đất bằng ôtô tự đổ 5 tấn trong phạm vi <= 1000m, đất cấp II
0.778
100m3
49
Vận chuyển đất bằng ô tô tự đổ 5T 1km tiếp theo trong phạm vi <= 5km, đất cấp II
0.778
100m3
50
Vận chuyển vữa bê tông bằng ôtô chuyển trộn, cự ly <= 4km, ôtô 10,7m3
0.603
100m3

Utilities for you

Bidding information tracking
The Bid Tracking function helps you to quickly and promptly receive email notifications of changes to your bid package "Tender package No 01: Construction work". In addition, you will also receive notification of bidding results and contractor selection results when the results are posted to the system.
Receive similar invitation to bid by email
To be one of the first to be emailed to tender notices of similar packages: "Tender package No 01: Construction work" as soon as they are posted, sign up for DauThau.info's VIP 1 package .

Bidding cost calculator

Costs related to contractors when conducting bidding on public procurement (Article 12 of Decree 24/2024/ND-CP)

Cost type Calculation formula Applicable fees (VND)
Annual account maintenance cost
Bid submission cost
Bid submission cost
Bid winning cost
Electronic bid bond connection cost
Total estimated cost

To view bid costs

You need to Login or Register to view the bidding cost.
Support and Error reporting
Support
What support do you need?
Reporting
Is there an error in the data on the page? You will be rewarded if you discover that the bidding package and KHLCNT have not met the online bidding regulations but DauThau.info does not warn or warns incorrectly.
Views: 58

You did not use the site, Click here to remain logged. Timeout: 60 second