Request for quotation of materials for thermal processing (emergency procurement) to support business operations in 2026.

Christmas-themed packaging/Packing

1

Set

Material for the insert fitting: P6315CL; Compatible with KOSO valve Model: 501T; Valve Serial No: V1RA35/36- 032; Valve Size: 2"x 2" DN50; KOSO Part Number: 11LBG30AA411

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Seal/Gasket

1

Female

Material: T1890-S. Compatible with KOSO valve: Model 501T; Serial No: V1RA35/36-032; Valve Size: 2"x 2" DN50; KOSO Part Number: 11LBG30AA411

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Christmas-themed packaging/Packing

1

Set

Materials: P #6710CH, P#6616CH; PN: 12; Valve size: DN 3” - Class 1500; Compatible valve: HRP Branch-L/R Blowdown valve; Drawing number: PFA-67409050-5; Part number: 11LBB10AA422 Okano

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Seal/O-ring

1

Female

Material: INCONEL; Pressure Rating: 14 bar; Valve Size: DN 3" - Class 1500; Compatible Valves: HRP Branch-L/R Blowdown valve; Drawing Number: PFA-67409050-5; Part Number: 11LBB10AA422 Okano

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Seal/Gasket

1

Female

Material: P#2600G; Pressure rating: 13 bar; Valve size: DN 3" - Class 1500; Compatible valve: HRP Branch-L/R Blowdown valve; Drawing number: PFA-67409050-5; Part number: 11LBB10AA422 Okano

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Sealing ring / Gasket ring

1

Female

Material: JPI 7S-23 “D”; Pressure Rating: 06; Valve Size: DN 3” – Class 1500; Compatible Valves: HRP Branch-L/R Blowdown valve; Drawing Number: PFA-67409050-5; Part Number: 11LBB10AA422 Okano

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The "Y" shaped input strainer for pumps

2

Set

- SUS 316 material, DN150, 10k pressure rating; - One filter set consisting of: one filter plus two bolts to connect the filter flanges to a DN150 flange, 10k pressure rating (made in China)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Y-shaped arch

1

Female

Y Globe, Size DN80, Class 2500LBC, 20.2MPa/365°C, Model van: Y Globe PJ55Y-2500LBC-DN80; Manufacturer: Dalian

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Y-shaped gate operated by an electric actuator (mechanical part)

1

Female

Y-shaped valve controlled by an electric actuator (mechanical part); Size: DN80, Class 1690, 20 MPa/365°C; BW SCH. 160; Valve Model: B10-8076Z-02TS- M; Valve length 257mm; valve stem diameter 32mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

DN80 drainage pipe

0,5

Meter

DN80 (ø88.9 x 11.1 mm), GB3R grade, A106C material, SCH.160, manufactured in Vietnam/China

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

90-degree angle

1

Female

90-degree elbow; DN80 (88.9 x 11.1 mm), GB3R class, A106C material, SCH.160, made in Vietnam/China

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Protect the spacer

2

Female

Part number: JMF8280-14; Reference: 4 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Disc case

2

Set

Part number: JMF8280-21; Reference: 5 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bolt driving

16

Female

Part number: JMF8280-31; Reference: 6 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bolt sleeve

16

Female

Part number: Ref. 7 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Locking nut

16

Female

Part number: GB889; Reference: 8 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bolt

32

Female

Part number: JMF8280-41; Reference: 9 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spring washer

32

Female

Part number: GB93-76; Reference: 10 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Screws

8

Female

Part number: JMF8280-51; Reference: 11 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Shipping assistance

16

Female

Part number: JMF8280-52; Reference: 12 Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

M8 x 35

4

Female

Part number: GB/T68-2000; Reference 13, Sincflex

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Pillow case sealing gasket

1

Set

RTL Seal Kit; Part Number: 435004; (Howden; Fan Model: L4 2079.06.72 SBV6T; Shaft Bearing: 4-15/16") Howden

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Gear oil

10

Liter

Mobil Glygoyle 220 (Mobil brand)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The plug and assembly for the PCV valve

1

Set

The plug and assembly for the PCV valve from GE/MASONEILAN; Model van: **88-41435; Temperature: 482°C, Pressure: 21.67 MPa (including parts 01, 09, 12, 15, 19, and 20) as per the attached GE/MASONEILAN drawings

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Tet wrapping / Packaging

1

Female

Detail number 06; PN: 005675793-932-0000 + 005675793-934-0000 Model van: **88-41435 GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spacing washer/Packing spacer

1

Female

Spacing gasket/Packing spacer; Part number: 05; Valve model: **88-41435; Temperature: 482°C, Pressure: 21.67 MPa; GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Sealing ring / Body gasket

1

Female

Details: No. 10; Van type: **88-41435; Temperature: 482°C, Pressure: 21.67 MPa, GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Sealing ring / Gasket

1

Female

Sealing ring; part number 11, compatible with: Valve model: **88- 41435, Maximum temperature: 482°C, Pressure: 21.67 MPa GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Sealing ring / Seat ring gasket

1

Female

Item number: 14; Valve model: **88-41435; Temperature: 482°C, Pressure: 21.67 Mpa, GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Sealing gasket / Cage gasket

1

Female

Item number: 24; Valve model: **88-41435; Temperature: 482°C, Pressure: 21.67 MPa, GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Long den / Cage washer

1

Female

Long đen/Cage washer; Part number: 25; Valve model: **88-41435; Temperature: 482°C, Pressure: 21.67 MPa; Manufacturer: GE/MASONEILAN

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Guide bush/bushing

1

Female

Item number: 22; Valve model: **88-41435; Temperature: 482°C, Pressure: 21.67 Mpa, GE/MASONEILAN**

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Hydraulic chain conveyor roller

2

Set

Model LC3 3.25X15E, P/N 307X15E4NC: - The cylinder includes hydraulic fittings and hydraulic tubing connecting the cylinder to the hydraulic distributor, compatible with existing equipment; - The cylinder has a threaded connection for the piston shaft and a compatible actuator mechanism for Nopak equipment.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Body of services for raw material input from MMF A (core part)

1

Female

RWT MMF: Service Inlet Automatic Valve; DN200; Valve Type: A-BFV; Model: 612XC; Body/Disc/Seat Material: FCD450/SCS14/EPDM; ANSI 150#. OKM

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

HCl output valve to the regeneration spray system

1

Female

DWT HCl EJECTOR, HCl OUTLET VALVE; DN20; Valve Type: DV; Model: T14; Materials (Body/Disc/Seat): PVC/PTFE; ANSI 150#/FF; Fluid: 4% HCl ASAHI

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Raw water inlet valve body

1

Set

The set includes the following part numbers: 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12; DW No: 1B0W-41E-DI-E-12 (appendix to drawings on page 3) ACHECH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Water inlet valve transmission box

1

Female

GEAR O.P (18GAC45 AA101); Number: 16; Material: Ductile Iron; DW No: 1B0W-41E-DI-E-12; (Appendix to drawing on page 3) ACHECH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x640x2500 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame) - Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x940x2700 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame) - Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

4

Female

Recommended dimensions: 30x530x2500 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame) - Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x990x2500 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame). Made in Vietnam.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x600x1770 mm (with two end supports, with screws for fixing, and a fully reinforced V-shaped steel frame around the perimeter). Made in Vietnam.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x990x1770 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame). Made in Vietnam.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x990x3400 mm (with two end supports, fixed mounting bolts, and a fully reinforced V-shaped steel frame) - Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

4

Female

Recommended dimensions: 30x1000x3350 mm (with two end supports, with screws for fixing, and a fully reinforced V-shaped steel frame around the perimeter). Made in Vietnam.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The galvanized grating is secured with bolts.

2

Female

Recommended dimensions: 30x820x3350 mm (with two end supports, fixed mounting screws, and a fully reinforced V-shaped steel frame) - Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Galvanized steel pipe

30

Meter

Galvanized steel pipe, diameter 42.2mm x 2.3mm x 6000mm, made in Vietnam/China

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Galvanized steel pipe

22

Female

Welded steel pipe, zinc-plated, diameter 42 mm, made in Vietnam/China

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Interzinc 52 epoxy primer

10

Set

Interzinc 52 epoxy primer, light gray color. Manufacturer: AkzoNobel (International Paint). 5 liters per set (2 components). AkzoNobel

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Epoxy primer, Interseal 670 HS

10

Set

Epoxy primer Interseal 670 HS, RAL 7035, Manufacturer: AkzoNobel (International Paint), 0.5 Liters per set (2-part system)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Interthane 990 epoxy coating

5

Set

Epoxy paint Interthane 990, color RAL 7043, Manufacturer: AkzoNobel (International Paint), 0.5 liters per set (2 components) from AkzoNobel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Interthane 990 epoxy coating

10

Set

Epoxy paint Interthane 990, color PHB 000, Manufacturer: AkzoNobel (International Paint), 0.5 liter per kit (2 components)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Thinner

5

Can

Thinner for GTA220 Manufacturer: AkzoNobel (International Paint) 5 Liters/can

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Thinner

5

Can

Thinner GTA733 Manufacturer: AkzoNobel (International Paint) 5 Liters/can

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

ABS DN40 hand valve

1

Female

ABS DN40 handstop valve; Connection type: ANSI Class 150 end flange (China)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spring-loaded valve

1

Roll

Special PTFE fiber, manufacturer: Pillar, model 4505L, size 14x14x10000 mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Y-shaped arch

1

Female

Y Globe, Size DN20, Class 2500LBP, 19.7MPa/365°C, Model van: Y Globe HJ65Y-2500LBP-DN20; Dr: 129285-1651G-007 Dalian

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Cast steel pipes

0,5

Meter

Steel pipe dimensions: DN20, material A106B, thickness 5.56mm; SCH160 (made in Vietnam/China)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Christmas-themed packaging/Packing

1

Set

Part Number: V368493 (SPX FLOW; 6" (150 mm), CL2500, WCB, BW, SD-1000-320 RA) SPX

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Guide bushing

1

Female

Part Number: V373408 (SPX FLOW; Model: 6" (150mm), CL2500, WCB, BW, SD-1000-320 RA) SPX

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Pipe joints

1

Female

C-55820-012 /10" LA NUV-STL CONN IS PIPE, HIGH TEMP (5.7.2.22) - Ash, Slag, UCC System

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Pulley for the fan (fan sheave)

1

Female

Pulley (fan sheave): Manufacturer: New York Blower, Model: 2304A-2604A, New York Blower

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Valve

1

Female

GLOBE VALVE; Part number: 22376467, Diameter: 9.53 SW Fluid/Medium: steam, water Piping: socket welding (9.53 SS tube), Pressure Ratings: 30.4 MPa (490°C); 24.5 MPa (574°C); 34.3 MPa (400°C) NIKKISO

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

High-pressure cable set

1

Set

A 20-meter long high-pressure cable, with a built-in anti-twist connector, for use with the Quadro 800 TST pump.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Nozzle set for the Quadro 800 TST pump

1

Set

Nozzles for the Quadro 800 TST pump

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Set of pliers with a handle

1

Female

Chinese MT4-B16 type spanner set with handle

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Set of pliers with a handle

1

Female

Chinese MT3-B13 handle clamp set

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Edge-bending machine guide rails

1

Set

PREP3 Tag edge beveling machine axis holders

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Black hexagonal wrench

1

Set

BondHus 10992 Hex Key Set (1.5mm – 6mm): (Set of L-shaped hex keys with one flat end and one hexagonal end, Size: 1.5 - 6mm (7 pieces), Stainless steel material) BondHus

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Nine-piece chrysanthemum arrangement

1

Set

Goodman 9-piece flower head set T6-T7-T8-T9-T10-T15-T20-T25-T27mm: (Goodman GM804-9 hexagonal flower head set, consisting of 9 heads: T6-T7-T8-T9-T10-T15-T20-T25-T27. Material: Corrosion-resistant chrome vanadium steel. Size: 75mm x 156mm x 12mm)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spanner wrench

1

Female

Ega Master 38111: 27mm Open-End Wrench – Stainless Steel 420 Material – Size: 27mm – Length: 290mm.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spanner wrench

1

Female

30mm Open-End Wrench: "Ega Master 38114 Stainless Steel Open-End Wrench - Material: 420 Stainless Steel - Size: 30mm - Length: 320mm" Ega Master

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Adjustable wrench (2-in-1)

1

Female

Two-way open wrench, 5.5x 7mm: Sata 41-216 two-way open wrench - Size: 5.5 x 7mm - Length: 124.9mm - High-quality CR-V steel material from Sata

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Adjustable wrench (2-in-1)

1

Set

Two-way adjustable wrench, 12 x 13mm: Sata 41-303 two-way open-end wrench - Size: 12 x 13mm - Length: 174.2mm - High-quality CR-V steel

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Two-headed wrench

2

Set

6-32mm Cr-V two-way open-end wrench: Kingtony 1112MR - 6/7-30/32mm * Product dimensions: 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32. High-quality Kingtony Cr-V steel

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Belt Wrench, 50mm diameter

3

Female

Fervi 0352: 50 mm chain wrench with a rubber-coated handle that is resistant to chemicals. This wrench is specifically designed for removing oil filters and plastic containers. The rubber-coated handle provides good grip on the palm. The wrench body is made of Chrome Vanadium steel, nickel-plated for corrosion resistance. The chain is made of synthetic fibers and has multiple layers. Chain length ≥ 610mm. Opening diameter ≥ 50 mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

12-inch claw hammer

3

Female

12-inch Pliers: 12-inch Ega Master 61113 Titacrom coated pliers. Length: 300mm. Jaw opening: 33mm. Made from special Ega Master steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

8-inch scraper

1

Female

8-inch Titacrom Ega Master 61111 Spanner: Length: 200 mm, Opening: 24 mm, Weight: 280 grams. The spanner body is made of robust forged and hardened steel. The spanner is coated with Titacrom to increase hardness and durability. A laser-engraved ruler is integrated into the handle. The spanner is manufactured from special Ega Master steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Two-way cooking pot

4

Female

Two-way screwdriver: Model: 66204, SATA 66204 (6x100mm). Type: One flat head (-), one Phillips head (+). Size: 6x100mm. SATA

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Set of two-headed screwdrivers

1

Set

Stanley 65-201 Two-Way Ratcheting Screwdriver Set: This set includes two ratcheting screwdrivers with a total length of 200mm (#8 x 7.8"). One screwdriver has a PH2 head (4"), while the other has a 6mm (1/4") flathead. Both screwdrivers have non-slip, ergonomic handles made from composite plastic. The blades are made of hardened chrome-plated steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

L-shaped block set

1

Set

L-shaped Allen wrench set (hex key) (1.5-10mm): A set of 9 CR-V steel hex keys with L-shaped heads. Item code: WP222011 - Brand: Workpro - Made in China - Specifications: L-shaped hex key set, 9 pieces, metric system (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm), CR-V alloy steel - Workpro CR-V alloy

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

A set of 13 hand tools

2

Set

The Kingtony 13-Piece Multi-Purpose Hand Tool Set includes: - 5 hex keys ranging from 2 to 5mm - 3 screwdriver heads - 1 Phillips head screwdriver - 1 flathead screwdriver - 1 combination wrench (8, 10, 15 mm) Dimensions: 9cm x 5cm x 3cm. Material: High-strength stainless steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Set of 2 automatic lenses

2

Set

Set of 2 Self-Adjusting Wrenches – Automatic Reversing & Shaking Function – C-Mart T001, High Quality – Material: Hard CR-V Steel – 2-Tooth Ratchet Mechanism with 12 Teeth per Rotation, Compatible with Various Sizes – Model: T0011-A – Includes 5 Separate Hexagonal Heads (8 - 10 - 12 - 13 - 17mm) – C-Mart

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

12mm hexagonal nut

3

Female

12mm Hexagon "L" Head Screw, Ega Master 65307 Size: 12 mm Material: CR-V European Standard Compliant: DIN ISO 2936/DIN 911 Hardness: 52 HRc Two-ended hexagon screw Length: 135mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Hexagonal pattern

2

Female

COLOR-CODED, LONG-HEADED, 10MM HEX KEY, PB SWISS TOOLS 627140 (PB 212.L 10 BL) 10mm Hex Key: Overall dimensions: 230x46mm; Surface: Electroplated; Material: Special alloy from PB Swiss Tools; Long-headed type.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Multi-purpose wrench

2

Female

Product Name: Universal 8-Position Rotating Wrench, 360 Degree Rotation, Super Durable, 52 in 1 • Material: High-quality CRV steel (Chrome-Vanadium) • U-shaped wrench head sizes: 8mm, 10mm, 11mm, 13mm, 14mm, 16mm, 17mm, 19mm • Wrench length: 25cm Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Open-end wrench set

2

Set

Deli's 14-Piece High-Quality CR-V Open-End Wrench Set: Corrosion-Resistant, Versatile Tool Set This set includes 14 high-quality CR-V open-end wrenches in sizes ranging from 6 to 24mm. The wrenches are chrome-plated for a bright finish and corrosion resistance, and are also very durable. Common sizes included (e.g., 6, 8, 10, 12, 14, 17, 19, 22, 24mm...)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spanner wrench

2

Set

Kingtony Open-End Wrench, 1060-30, 30mm – Specifications: – Product Code: 1060-30 – Manufacturer: Kingtony – Origin: Taiwan – Material: Chrome Vanadium Alloy Steel – Certifications: ISO 7738, DIN 3113 – Wrench Type: Open-end wrench, single head – Size: 30x345mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spanner wrench

2

Female

Kingtony Open-End Wrench, 1060-32, 32mm – Specifications: – Product Code: 1060-32 – Manufacturer: Kingtony – Origin: Taiwan – Material: Chrome Vanadium Alloy Steel – Certifications: ISO 7738, DIN 3113 – Type: Open-end wrench, 1 head – Size: 32x365mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Spanner wrench

2

Female

Technical Specifications: Kingtony 1060-36 Open-End Wrench, 36mm Size: 36mm – Made from Chrome-Vanadium Alloy Steel – Type: Single Open End, Single Socket (Kingtony)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Emergency eye wash kit

1

Set

Model: EPE-4/15 (China)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

12mm screw

4

Female

12mm Hexagon "L" Head Screw, Ega Master 65307 Size: 12 mm Material: CR-V European Standard Compliant: DIN ISO 2936/DIN 911 Hardness: 52 HRc Two-ended hexagon screw Length: 135mm

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

14mm lens

4

Female

L-shaped Hex Key, 14mm, Ega Master 65308. Size: 14mm. Material: CR-V. Meets European Standards: DIN ISO 2936/DIN 911. Hardness: 52 HRc. Two-ended hexagonal key. Length: 155mm. Ega Master

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

8-inch claw hammer

4

Female

8-inch Titacrom Ega Master 61111 Spanner: Length: 200 mm, Opening: 24 mm, Weight: 280 grams. The spanner body is made of robust forged and hardened steel. The spanner is coated with Titacrom to increase hardness and durability. A laser-engraved ruler is integrated into the handle. The spanner is manufactured from special Ega Master steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

10" wrench

5

Female

Ega Master 61942, 10-inch multi-purpose wrench with Titacrom coating. Wrench length: 250 mm. Jaw opening for bolts: 29 mm. Jaw opening for pipes: 1.1/4". Made from special Ega Master steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

12-inch claw hammer

2

Female

12-inch Titacrom Ega Master 61113 Claw Hammer: Length 300mm, Opening 33mm. Made from special Ega Master steel.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Electric pliers

4

Female

Brand: C-MART - Model: B0054-08 - Size: 200mm - Pliers are made of high-strength CR-V steel - Handles are covered with premium plastic, providing a non-slip grip - Size: 8” (200mm) C-MART

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Screwdriver set (2-sided + 4-sided)

1

Set

TOLSEN Insulated Screwdriver Set 38012: Material: CrV (Chrome Vanadium). Includes: 0.5x3x75mm, 0.8x4x100mm, 1.0x5.5x125mm, PH1x80mm, PH2x100mm. TOLSEN

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

AC/DC current measuring clamp meter

1

Female

Ampe kìm for measuring AC/DC current (FLUKE 374), with a capacity of 600A, TRUE RMS measurement. DCA: 600A /0.1 A /2% ± 5 digits ACV: 600V /0.1 V /1.5% ± 5 digits DCV: 600V /0.1 mV /1% ± 5 digits R: 60,000 Ω /0.1 Ω/1% ± 5 digits F: 500 Hz /0.1 Hz /0.5% ± 5 digits C: 1 µF to 1000 µF /1 µF /1% ± 4 digits

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Insulation resistance meter

1

Female

HIOKI IR4056-21 Insulation Resistance Meter: Test Voltages: 50V/125V/250V/500V/1000VDC, Resistance: 100MΩ/250MΩ/500MΩ/2000 MΩ/4000MΩ. Features include circuit testing, automatic discharge, AC/DC detection, comparison function, and automatic power-off. Power source: LR6 (AA) x 4

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Lance tube

1

Female

Material: BW6330 Diameter: 102mm Length: 13590mm; Used for the IK545 dust blowing nozzle from Clyde Bergemann DPMH.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Feed tube

1

Female

Part No: 310635-1137; Inner Diameter: 60mm; Material: 321 SST, Compatible with IK-545 dust extraction nozzles. Clyde Bergemann DPMH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Column support for HGT dust blower nozzles

3

Female

Part number 343444-1121, Clyde Bergemann DPMH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Seal

3

Female

Part number 907920-0061, Clyde Bergemann DPMH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Seal

3

Female

Part number 907920-0052, Clyde Bergemann DPMH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Gear-type oil pump

6

Female

Model: PGP511A0140CL6H2N E6E5B1B1 Parker Siemens

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Valve

1

Set

Globe valve, NPS 1 ½'' (DN40), Class 2500, Design operating pressure: 19.65 MPa / 365°C, Figure number: W07-4105Y-02TS-M, Used as a replacement for the continuous discharge valve for steam jackets. Velan

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Cast steel pipe

1

Meter

A106B cast steel pipe, 48.4 x 10.5 x 1000 mm, DN40, SCH XXS, Class AA3R, Made in Vietnam/China

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Non-corrosive slag deflector plate for furnaces

14

Female

Non-corrosive bottom furnace grate, part number 492519-1, Flight-max SFC, materials A38 & A500 (made in Vietnam)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bottom slag deflector with a corrosion-resistant electrode

24

Female

Electric-powered slag removal bar, type with corrosion-resistant electrodes, part number 492519-4, Flight-max SFC, materials A38 & A500 (Vietnam)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Drill bit shank

2

Female

46.0mm drill bit shank, Model 602-466; Material: HSS Nachi

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Set of Taro Ren needles for transplanting

2

Set

RE-HT M56x5.5 ISO2 2P Yamawa threaded nose cone

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Output signal from the MMF turbidity meter

1

Female

RWT MMF OUTLET TURBIDITY CONTROL VALVE; DN25; Valve Type: NV; Material: Body/Disc/Seat: PVC/EPDM; ANSI 150#/FF; Fluid: Filtered Water, ASAHI

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Y-shaped arch

1

Female

Y Globe, Size DN80, Class 2500LBC, 20.2MPa/365°C, Model van: Y Globe PJ55Y-2500LBC-DN80; Dr: 129285-1651G-028 Dalian

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Drain pipe

0,5

Meter

DN80 discharge pipe (88.9mm x 11.1mm), GB3R standard, A106C material, SCH.160, manufactured in Vietnam/China.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Chain-linked ship bottom

6

Female

Chain link anchor for slag bottom: - PN 492525-2 - 38 links per set, - Model: Pewag hero friction welded chain; - Size: 26x100 (diameter x width), 100mm pitch - Chain length 167mm. Pewag

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Dry ship shaft bearing assembly

4

Set

The dry ship slag shaft bearing set (including: 1 bearing + 1 spacer) is installed on the dry ship slag shaft (PN: 2-492076). The bearing set (including: 1 bearing + 1 spacer) is compatible with PN references 405104-3 & 405104-4, dw 5-4920-29, manufacturer: UCC

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Gearbox housing

1

Female

Gear case, part number 17, compatible with model: CM-22R-VV46-A40-ZO44, Tohkemy

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

First planetary gear

6

Female

First planetary gear, detail number 5; compatible with model: CM-22R-VV46-A40-ZO44 from Tohkemy

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Second planetary gear

6

Female

Second planetary gear, part number 6; compatible with model: CM-22R-VV46-A40-ZO44 from Tohkemy

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bearings

1

Female

NSK 629, (part number 8), or an equivalent NSK part

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Bearings

1

Female

NSK 6303, (part number 13), or an equivalent NSK part

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Support brackets and rollers for the IK545 dust blower

1

Set

Accessories and rollers for the IK545 dust blower: includes parts from 01 to 34; Pre-assembled according to specifications; (refer to attached drawings) IK545 LANCE AND FEED TUBE AUXILIARY SUPPORT ASSY PN: 349801-0044 Clyde Bergemann DPMH

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Vacuum pump isolation method 2AB

2

Set

Vacuum isolation valve 2AB. – Manufacturer: Intervalve, size 300, ACT + MO model: PD500+Moil, UCC (I) part no 55820-01-233 - The valve includes: Valve body, integrated control and drive mechanism attached to the valve, ASME B16.5 #150 two-flanged end connections. Intervalve

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Pump for coal pulverization system

2

Female

Barrel pump for coal pulverization system (including the suction inlet filter and two threaded connections to the new pump design). Model F302 Bijur delimon

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Lance tube

1

Female

Item: 6; Part No: 347139-0041; Model: IK-525; Contract: 1502003; Travel: 5.46m; Speed: 3.6 m/min; Used for Clyde Bergemann DPMH Dust Blow Nozzle

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Feed tube

1

Female

D60xL6000mm; Model: IK-525; Contract: 1502003; Travel: 5.46m; Speed: 3.6 m/min; Used for Clyde Bergemann IK525 Dust Blowers

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Rubber support strap for TT6 vibrating funnel

18

Meter

Outer diameter of 32 mm x Inner diameter of 13 mm, with a central groove approximately 3 mm wide. Material: Vietnam-made NBR rubber.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Square

6

Female

Dimensions: 200x200 mm, suitable for rubber tubing used in the TT6 vibrating funnel; Outer diameter: 32 mm x Inner diameter: 13 mm, with a single vertical groove approximately 3 mm wide. Material: Vietnam-made NBR rubber.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The letter "Y"

1

Female

Y-GLOBE, Size DN40, Class 1690 LTD, 19650kPa/382.2oC, Model: W07-8076Z-02TS-M; Dr: P011-890065-007 Velan

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Coal division

27

Female

Material: XAR500. Used for the double cyclone burner of the Foster Wheeler brand. Detailed specifications are available in the attached drawings from Vietnam.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Protective cover for the ash separator box

48

Sheet

Dimensions: 457 x 575 x 10mm, Material: BW450 (made in Vietnam)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Coal splitter with a central support

15

Sheet

Dimensions: 457 x 127 x 20. Material: SA36 (Vietnamese standard)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Coal dust separator gasket

27

Female

Outer dimensions: 620 x 563 mm, inner dimensions: 486 x 484 mm. Thickness: 3mm. 26 holes with a diameter of 17mm. Material: Garlock Grap-Lock 3125SS (made in Vietnam)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

M16 magazine

420

Female

M16 8.8 (Vietnam)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Oil sprayer

48

Set

Including two components: - Mixing chamber: OD35; material TP310S ASTM A312. - Chemical injection nozzle: Material 35NiCrMoV12-5 EN 10060. (Components as per attached drawings) Vietnam

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Hydraulic chain tensioner for barges

1

Set

A408-129-A06 hydraulic chain tensioner kit, including: control unit, hydraulic splitter, operating handle, pressure gauge, oil lines, fittings, and accessories that connect to the cylinder, and the hydraulic pump for the system controlling the chain tensioning cylinder. Sun Hydraulics

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

The ash intake pipe

1

Female

55820-1812-13-1010101-01-2000 / INTAKE-FA, 12" X 10", SRP, RH, AC (SP 5.5.7) Ash, Slag, UCC system

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

HCl output valve to the regeneration spray system

1

Female

DWT HCl EJECTOR, HCl OUTLET VALVE; DN20; Valve type: DV; Model: T4; Body/Disc/Seat Material: PVC/PTFE; ANSI 150#/FF; Fluid: 4% HCl; Manufacturer: PRAHER or equivalent. Appendix with drawings included. PRAHER

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Vacuum pump

3

Female

Pully vacuum pump, manufacturer: Kakati, model: KVL 900, size: V-pulley, 1000 PCD x5 SPC, Dw: KKI/KV900/ 22 41 15. - The pulley is compatible for installation with the pump on site and includes all necessary pulleys and mounting bolts. Kakati

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Engine pump drive pulley

3

Female

Engine drive pump pulley, manufacturer: Kakati, model: KVL 900, size: V-pulley, 350 PCD x5 SPC, Dw: KKI/KV900/ 22 41 15. - Pulley compatible for installation with the engine on site, including all Kakati mounting pulleys and bolts.

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

Pressure-compensated air bladder control system

1

Female

Bladder, Part Number: 2, Material: Synthetic Rubber, Compatible with: Model: NF-N21MP-L60-AAC; Manufacturer: NACOL (Nippon Accumulator - Japan)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

O-ring

1

Female

JIS B2401 O-ring, Material: Synthetic rubber, Part Number: 11, Compatible with: Model: NF-N21MP-L60-AAC; Manufacturer: NACOL (Nippon Accumulator - Japan) NACOL

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

O-ring

1

Female

O-ring, AS56BA 009, Material: Synthetic rubber, Part Number: 12, Compatible with: Model: NF-N21MP-L60-AAC; Manufacturer: NACOL (Nippon Accumulator - Japan)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.

O-ring

1

Female

JIS B2401 G75 O-ring, Material: Synthetic rubber, Part Number: 61, Compatible with: Model: NF-N21MP-L60-AAC; Manufacturer: NACOL (Nippon Accumulator - Japan)

Thai Binh Thermal Power Plant – Address: Thai My Village, Dong Tai Commune, Ninh Giang District, Hung Yen Province.

According to the manufacturer's regulations

- All products are 100% new and manufactured from 2025 onwards. - The warranty period for the products is at least 18 months from the date of delivery. - The contractor must be present on site within 24 hours of being notified of a defect in the product, to work with the client to determine the cause and propose a solution. - Once the defect has been confirmed, the contractor is responsible for repairing or replacing all defective products within 10 days of receiving notification from the client. The contractor will be fully responsible for all costs associated with correcting the defect, including but not limited to: labor costs, material preparation, equipment for transportation, dismantling, installation, testing, calibration, and other incidental expenses. During the warranty period, if any product is damaged, fails to meet quality standards, or does not meet technical requirements, the contractor must repair or replace it according to the client's request. For items/parts that have been repaired or replaced, the warranty period will be recalculated from the date the replacement/repair was made and put into use, but no less than 18 months from the original delivery/acceptance date.