Contact Us
- 0904.634.288, 024.8888.4288
- [email protected]
- Facebook Fanpage: http://fb.com/dauthau.info
- Messenger: http://m.me/dauthau.info
Contact Us
-- You will be rewarded if you detect false warnings! See instructions here!
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent. To download, please Login or Register
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent.
To download, please Login or Register
Number | Job Description Bidding | Amount | Calculation Unit | Technical requirements/Main technical instructions | Note |
---|---|---|---|---|---|
66 | Móng cột đèn chiếu sáng | 1 | Móng | Theo quy định tại Chương V | |
67 | Dàn đèn chiếu sáng+thang trèo | 1 | Bộ | Theo quy định tại Chương V | |
68 | Kim thu sét dài 6m | 1 | Bộ | Theo quy định tại Chương V | |
69 | Ghế thao tác máy cắt | 1 | Bộ | Theo quy định tại Chương V | |
70 | Cột chiếu sáng cao 20m bằng bê tông ly tâm NPC.I-20-190-11 | 1 | Cột | Theo quy định tại Chương V | |
71 | Bệ đỡ tủ đấu dây | 1 | Bệ | Theo quy định tại Chương V | |
72 | Xây mới mương B400A hoàn trả hiện trạng | 5.4 | m | Theo quy định tại Chương V | |
73 | Cải tạo đặt gối đỡ thang cáp tại mương cáp B400 | 11.2 | m | Theo quy định tại Chương V | |
74 | Cải tạo đặt giá đỡ cáp tại mương qua đường B800QĐ | 18 | m | Theo quy định tại Chương V | |
75 | Hàng rào lưới thép B40 | 21.8 | m | Theo quy định tại Chương V | |
76 | Tiếp địa bổ sung ngoài trời | 1 | HT | Theo quy định tại Chương V | |
77 | CUNG CẤP VẬT TƯ THIẾT BỊ VÀ THI CÔNG LẮP ĐẶT CHO HẠNG MỤC: CẤU HÌNH, KẾT NỐI TÍN HIỆU HỆ THỐNG ĐIỀU KHIỂN MÁY TÍNH VÀ SCADA | Hạng mục | Theo quy định tại Chương V | ||
78 | Kiểm tra hiệu chỉnh các tham số cấu hình IEC 61850 | Hạng mục | Theo quy định tại Chương V | ||
79 | Kiểm tra cấu trúc kết nối các IED (IP, IED NAME, MAC ADDRESS) | 3 | hàm | Theo quy định tại Chương V | |
80 | Kiểm tra phân tích bản tin IEC61850 (Access Point, Logical Node, Logical Device, Data Atributte …) | 3 | hàm | Theo quy định tại Chương V | |
81 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node GGIO - Nhóm dữ liệu Input/Output | 3 | hàm | Theo quy định tại Chương V | |
82 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node XCBR - Nhóm dữ liệu Máy cắt | 3 | hàm | Theo quy định tại Chương V | |
83 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node XSWI - Nhóm dữ liệu trạng thái Dao cách ly, Dao tiếp địa. | 3 | hàm | Theo quy định tại Chương V | |
84 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node CSWI - Nhóm dữ liệu trạng thái điều khiển máy cắt, dao cách ly, dao tiếp địa. | 3 | hàm | Theo quy định tại Chương V | |
85 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node MMXU - Nhóm dữ liệu đo lường | 3 | hàm | Theo quy định tại Chương V | |
86 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node PTOC, PIOC - Nhóm dữ liệu bảo vệ quá dòng | 3 | hàm | Theo quy định tại Chương V | |
87 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node PDIF, PDIS - Nhóm dữ liệu bảo vệ so lệch, bảo vệ khoảng cách | 3 | hàm | Theo quy định tại Chương V | |
88 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node RREC, RBRF - Nhóm dữ liệu tín hiệu tự đóng lại, bảo vệ hư hỏng máy cắt. | 3 | hàm | Theo quy định tại Chương V | |
89 | Kiểm tra phân tích bản tin IEC61850-Cấu trúc dữ liệu Logical Node PTOV, PTUV - Nhóm dữ liệu tín hiệu bảo vệ điện áp cao, bảo vệ điện áp thấp | 3 | hàm | Theo quy định tại Chương V | |
90 | Kiểm tra dữ liệu trong Dataset của BCU/Relay, đối chiếu với dữ liệu tại thời điểm nghiệm thu | 3 | hàm | Theo quy định tại Chương V | |
91 | Kiểm tra, đánh giá bản tin GOOSE transmission giữa các IED - (bản tin GOOSE gửi), đối chiếu với dữ liệu tại thời điểm nghiệm thu | 3 | hàm | Theo quy định tại Chương V | |
92 | Kiểm tra, đánh giá bản tin GOOSE receive giữa các IED - (Bản tin GOOSE nhận), đối chiếu với dữ liệu tại thời điểm nghiệm thu | 3 | hàm | Theo quy định tại Chương V | |
93 | Kiểm tra lệnh tổng kiểm tra của Report (Interrogation command) - Lệnh tổng kiểm tra dữ liệu | 3 | hàm | Theo quy định tại Chương V | |
94 | Kiểm tra lệnh Trigger Data của Report (Data change, Data Update, Quality change …) - Lệnh cập nhật dữ liệu khi có thay đổi. | 3 | hàm | Theo quy định tại Chương V | |
95 | Kiểm tra lệnh đồng bộ thời gian từ máy tính SNTP | 3 | hàm | Theo quy định tại Chương V | |
96 | Kiểm tra kiểu dữ liệu trạng thái 1 bit SPI- Single point Information) - kiểu dữ liệu nhị phân BOOL | 3 | hàm | Theo quy định tại Chương V | |
97 | Kiểm tra kiểu dữ liệu trạng thái 1 bit SPI kèm nhãn thời gian - Single point Information with time tag) - kiểu dữ liệu nhị phân BOOL | 3 | hàm | Theo quy định tại Chương V | |
98 | Kiểm tra kiểu dữ liệu trạng thái 2 bit DPI- Double point Information) - kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
99 | Kiểm tra kiểu dữ liệu trạng thái 2 bit DPI kèm nhãn thời gian - Double point Information with time tag) - kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
100 | Kiểm tra kiểu dữ liệu trạng thái chỉ thị nấc phân áp TPI - Tap point Information) - kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
101 | Kiểm tra kiểu dữ liệu trạng thái chỉ thị nấc phân áp TPI kèm nhãn thời gian - Tap point Information with time tag) - kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
102 | Kiểm tra lệnh điều khiển 1 bit (điều khiển On/Off chức năng) 1 bước lệnh SPC Direct - Single Point Command - Kiểu dữ liệu số nguyên BOOL | 3 | hàm | Theo quy định tại Chương V | |
103 | Kiểm tra lệnh điều khiển 1 bit (điều khiển On/Off chức năng) 2 bước lệnh SPC SBO - Single Point Command Select Before Operation - Kiểu dữ liệu số nguyên BOOL | 3 | hàm | Theo quy định tại Chương V | |
104 | Kiểm tra lệnh điều khiển 2 bit (điều khiển Máy cắt, Dao cách ly, Dao tiếp địa) 1 bước lệnh DPC Direct - Double Point Command - Kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
105 | Kiểm tra lệnh điều khiển 2 bit (điều khiển Máy cắt, Dao cách ly, Dao tiếp địa) 2 bước lệnh DPC SBO - Double Point Command Select Before Operation - Kiểu dữ liệu số nguyên INT | 3 | hàm | Theo quy định tại Chương V | |
106 | Kiểm tra dữ liệu đo lường, kiểu dữ liệu chuẩn hóa (Measure value, Normalized value) | 3 | hàm | Theo quy định tại Chương V | |
107 | Kiểm tra dữ liệu đo lường, kiểu dữ liệu số thực (Measure value, Normalized value) | 3 | hàm | Theo quy định tại Chương V | |
108 | Ngăn tụ | Hạng mục | Theo quy định tại Chương V | ||
109 | Xây dựng cơ sở dữ liệu trên RTU/GATEWAY, DCS/SAS tại trạm biến áp | 3 | ngăn | Theo quy định tại Chương V | |
110 | Cấu hình và cài đặt CSDL cho hệ thống máy tính chủ tại Trung tâm điều khiển xa | 3 | ngăn | Theo quy định tại Chương V | |
111 | Cấu hình và cài đặt CSDL cho hệ thống máy tính chủ tại Trung tâm giám sát dữ liệu NPC | 3 | ngăn | Theo quy định tại Chương V | |
112 | Cấu hình và cài đặt CSDL cho hệ thống máy tính chủ tại Trung tâm điều độ | 1 | ngăn | Theo quy định tại Chương V | |
113 | Kiểm tra, thử nghiệm tín hiệu Point-to-Point | Hạng mục | Theo quy định tại Chương V | ||
114 | Tín hiệu đo lường (AI) | Hạng mục | Theo quy định tại Chương V | ||
115 | Dòng cho 1 pha: | 7 | Tín hiệu | Theo quy định tại Chương V |
Data analysis results of DauThau.info software for bid solicitors BAC NINH POWER COMPANY - BRANCH OF NORTHERN POWER CORPORATION as follows:
- Has relationships with 243 contractor.
- The average number of contractors participating in each bidding package is: 2.70 contractors.
- Proportion of bidding fields: Goods 27.01%, Construction 53.28%, Consulting 6.57%, Non-consulting 13.14%, Mixed 0%, Other 0%.
- The total value according to the bidding package with valid IMP is: 811,958,819,239 VND, in which the total winning value is: 766,712,790,203 VND.
- The savings rate is: 5.57%.
If you are still not our member, please sign up.You can use your account on DauThau.info to log in to Dauthau.Net, and vice versa!
Only 5 minutes and absolutely free! Your account can be use on all over our ecosystem, including DauThau.info and DauThau.Net.
Security Code
Similar goods purchased by Bid solicitor BAC NINH POWER COMPANY - BRANCH OF NORTHERN POWER CORPORATION:
No similar goods purchased by the soliciting party were found.
Similar goods purchased by other Bid solicitors excluding BAC NINH POWER COMPANY - BRANCH OF NORTHERN POWER CORPORATION:
No similar goods have been found that other Bid solicitors have purchased.
Similar goods for which the bidding results of the Ministry of Health have been announced:
No similar goods have been found in the bidding results of the Ministry of Health.