Buy neurosurgery supplies

Skull patch 150 mm x 150 mm

10

Pieces

Titanium material, size 150 mmx150 mm (±2), mesh structure is designed in a Y-shaped shape that can be bent in 3 dimensions (3D), high flexibility, easy to shape, . Counter sink type screw holes allow screws to be flush with the mesh surface, standard 6mm screw hole spacing: CE. Origin: G7 countries

Tra Vinh General Hospital

Skull patch 200 mm x 200 mm,

10

Pieces

Titanium material, size 200mmx 200mm (±2), mesh structure is designed in a Y shape that can be bent in 3 dimensions (3D), high flexibility, easy to shape. Counter sink type screw holes allow screws to be flush with the mesh surface, screw hole distance 6mm, standard: CE. Origin: G7 countries

Tra Vinh General Hospital

Mini vit 2.0 mm

600

Female

Titanium material, diameter 2.0 mm x 6mm. The screw neck has a locking thread to ensure strong, stable bone holding force, the thread pitch is 1mm long, the screw head has a docking guide hole to hold the screw tighter when manipulating and direct the center of gravity when twisting, Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Self -eliminating epidural glue

10

Tube

Set includes dual cylinder: Glue mixture includes: Polyethylene Glycol blue precursor and color precursor in trilysine amine/ buffer. Capacity 5ml.

Tra Vinh General Hospital

Self-adhesive dural patch size 10 cm x 12.5 cm

10

Female

Ultra Pure Collagen material, size 10 cm x 12.5 cm, the entire patch design has micro cavities measuring 50-150 microns. Self-absorbs and turns into autologous dura mater after about 12 months, self-adhesive. Origin: G7 countries

Tra Vinh General Hospital

Inner cerebrospinal drainage set

5

Set

Flat bottom design, prefabricated valve attached to abdominal drainage catheter, 120cm long, anti-twisting type, with reflux control. The ventricular catheter is 18cm long. Pressure types: medium or low pressure Standard: CE

Tra Vinh General Hospital

External cerebrospinal fluid drainage set with intraventricular catheter

5

Set

Include: - Has 4-way lock, anti-reflux valve, two sampling/injection positions, air filtration vent. Drainage chamber volume 50ml, drainage bag volume 700ml. Pressure scale in mmHg and Cm H20 integrated on the drainage bag. - Attached is 1 ventricular catheter 35cm long, outer diameter 3.0 mm-3.3 mm, inner diameter 1.6 mm-1.9 mm, with 38cm catheter release tool, trocar size 10F 15cm long. Standard: CE

Tra Vinh General Hospital

Intracranial pressure and ventricular drainage monitor

5

Set

Drainage chamber volume 100ml with graduation. Antibacterial air convection valve, 1-way anti-reflux valve, L-shaped anti-twist adapter. Pressure transducer included. There is a multi-unit pressure scale measuring mmHg and cmH2O. Drainage bag volume 800ml.Standards: CE,

Tra Vinh General Hospital

The cerebrospinal fluid retains the lumbar out

5

Set

Include: - Has 4-way lock, anti-reflux valve, two sampling/injection positions, air filtration vent. Drainage chamber volume 50ml, drainage bag volume 700ml. Pressure scale in mmHg and Cm H20 integrated on the drainage bag. - Includes lumbar catheter 80cm long, external diameter 1.5mm, external diameter 0.7mm; 1 Kim Tuohy 14G x 8.8cm; 1 set of luer connectors, 1 blunt needle size 22G. Standard: CE

Tra Vinh General Hospital

Cerebrospinal fluid drainage valve set with 5 pressure levels

10

Set

The valve has a lock to prevent pressure changes when affected by external forces due to impact or when entering the MRI magnetic field. The valve has 05 force levels from 30 - 200 mm H2O. Transparent polysulfone valve housing allows valve pressure to be seen before implantation, Valve Diameter 16 mm The pressure regulator has 3 parts including: 01 Positioning frame with rotating ring displaying 04 pressure systems, 01 Compass to determine valve center position, 01 Valve unlocking tool and valve pressure adjustment Ventricular fluid drainage wire, 23 cm long, inner diameter 1.3 mm, outer diameter 2.5 mm, drainage wire to the abdomen is 110 cm long; inner diameter 1.1 mm outer diameter 2.5 mm

Tra Vinh General Hospital

The cerebrospinal fluid drainage valve can adjust 8 pressure levels

10

Set

The valve has 08 force levels from 30mm -200 mm H2O. Transparent polysulfone valve cover allows valve pressure to be seen before implantation, Valve diameter 16mm The pressure regulator has 3 parts including: 01 positioning frame with rotating ring displaying 04 pressure systems, 01 compass to determine valve center position, 01 tool to open valve and adjust valve pressure Ventricular drainage wire, 23 cm long; Inner diameter 1.3 mm, outer diameter 2.5 mm, Drainage wire to the abdomen is 110 cm long; inner diameter 1.1 mm outer diameter 2.5 mm

Tra Vinh General Hospital

High/low/medium pressure abdominal cerebrospinal fluid drainage valve set

10

Set

Silicone valves are flexible to avoid sticking and deforming. The valve base is made of Polypropylene material to prevent the needle from piercing the valve when taking fluid. Highly elastic silicone valve dome allows use with needles ≤ 25. There are 3 types of force: low/medium/high. Valve size is 6 mm x 26 mm, or 5 mm x 20 mm. Contrast-impregnated catheters, 2.5 mm outer diameter and 1.3 mm inner diameter. The ventricular drainage wire is 20 cm long, has 4 rows of holes, each row has 4 drainage holes, has 3 length markers, 5 cm apart. The abdominal drainage wire has 4 drainage slots at the end of the wire, 90 - 100 cm long.

Tra Vinh General Hospital

Catheters drain cerebrospinal fluid from the ventricles to the outside of EVD - BMI

10

Set

Conducts cerebrospinal fluid from the ventricles to the outside. Monitors the pressure and flow rate of cerebrospinal fluid from the ventricles, One-way pneumatic valve prevents bacterial invasion and negative pressure effects, Two locations for fluid collection and intraventricular drug injection. The fluid tank moves to monitor the flow and has a temporary lock to adjust pressure quickly and accurately. Table for monitoring and adjusting intracranial pressure, size 110 mm x 630 mm, reusable 700 ml fluid bag. Intraventricular catheter 35 cm long.

Tra Vinh General Hospital

Percutaneous multiaxial screw with cement injection hole, with internal screws.

200

Set

Screw material is titanium alloy. Hollow multi-axis screw with cement pump barrel, screw head with self-tapping square thread, rotation angle ± 30 degrees, screw body with tapered conical design. On the screw body there are 2 thread pitch areas, the angle between the two thread rings is 62 degrees. Sizes range from 4.5mm - 8.5mm, length from 25mm to 60mm. There are 3 vertical rows of cement drainage holes, with 3,4 or 5 cement drainage holes in each row depending on the screw length. Cement pump hole diameter is ≥ 1.2 mm, Internal locking screws are synchronized with multi-axis screws, single-axis screws, and multi-axis sliding screws. The internal locking screw has a square thread pitch, the thread opening angle is 12 degrees, the locking screw height is 4.6mm, Material is titanium alloy. Originated from G7 countries. ISO 13485 standard

Tra Vinh General Hospital

Vertical brace length 30mm - 300mm

30

Female

Material is titanium alloy, Diameter 6.0mm, available in curved and straight shapes, length 30mm - 300mm. Originated from G7 countries. ISO 13485 standard

Tra Vinh General Hospital

The cement pump connection needle is compatible with the cement pump bore screw

200

Female

Material: Titanium alloy. The diameter of the bottom end of the cement pump needle is 3.2±0.3mm, the diameter of the cement pump barrel is 1.68±0.3mm, the length of the cement pump needle is 100mm/ 200mm.

Tra Vinh General Hospital

The needle probes the spinal pedicle at all levels

40

Female

Spinal probe needles include 02 needles, sizes 8G, 11G and 13G. The needle tip is beveled or pointed. The handle is made of plastic, has an anti-rotation locking system and the rest is made of steel. Originated from G7 countries. ISO 13485 standard

Tra Vinh General Hospital

Pressure pump pushes cement with cement mixer

20

Female

Cement mixing and pressure pumping system: Mixing chamber volume ≥ 80 cm3 The closed mixer is made of plastic in which the lid has a lock and has a metal ball. With a small size, the mixer can cool cement and increase working time. The pressure pump is designed with a convenient handle and has a mechanism to stop the cement by rotating 180° counterclockwise. Originated from G7 countries. ISO 13485 standard

Tra Vinh General Hospital

Biological cement with phase solution

30

Female

Biocement used in spine surgery Ingredients include: Cement powder 24g (± 1g) and cement solution 10ml (± 1ml) + Cement powder 24g includes: Poly(methyl methacrylate) 10.95 g; poly(methyl acrylate/methyl methacrylate) 1.75 g; Zirconium dioxide 10.80 g; benzoyl peroxide 0.50 g. + 10ml solution includes: Methyl methacrylate 9.93 ml, N,N-dimethyl-p-toluidine 0.07 ml, stabilizer with 60 ppm hydroquinone. Sterilization, Standard: ISO/CE

Tra Vinh General Hospital

Cement pouring kit for vertebral body shaping without shadow 11G, 13G, 15G

40

Set

The shadowless vertebral body shaping cement pouring kit includes: Spinal probe needle includes 02 needles, sizes 8G, 11G and 13G. The needle tip is beveled or pointed. The handle is made of plastic, has an anti-rotation locking system and the rest is made of steel The closed mixer is made of plastic in which the lid has a lock and has a metal ball. With a small size, the mixer can cool cement and increase working time. Mixing time is short ≤ 30 seconds and application viscosity is achieved quickly upon mixing. Cement working time can last up to 18 minutes if the room temperature is 18 degrees Celsius or 11 minutes if the room temperature is 25 degrees Celsius

Tra Vinh General Hospital

The hollow multi -axis screws are used to pump cement

180

Female

Titanium material. Size: 5mm - 7mm, length 35 mm - 60 mm, On the screw body there are ≥ 9 cement injection holes, each side has ≥ 3 holes allowing uniform injection of cement. The screw head is designed to attach to the cement pump canulla. The hollow inside of the screw is designed according to the mechanical principle of fluid, allowing cement to easily penetrate through the holes without flowing down to the bottom of the screw body. Pre-sterilized packaging Standards: ISO, CE. Origin: European countries

Tra Vinh General Hospital

Lock screw in the lumbar spine

180

Female

Titanium material, pre-sterilized packaging Standards: ISO, CE. Origin: European countries

Tra Vinh General Hospital

The brace along the lumbar spine

70

Female

Material: Titanium, Size: diameter: 5.4mm, length 50 mm - 90 mm, Vertical brace is pre-bent with screws with sharp, fine threads. Pre-sterilized packaging, Standards: ISO, CE. Origin: European countries

Tra Vinh General Hospital

Kim poked the cement pump into the vertebra body

150

Female

Material: Stainless steel, Size: 2 types: 11G and 13G, length 125mm, Genuine pre-sterilized packaging. Standards: ISO, CE

Tra Vinh General Hospital

Chemical cement shapes the vertebral body

75

Box

Ingredients: Powder bottle: 27.0g - 27.2g: Including 45% Zirconium dioxide and 5% Hydroxyapatite, solution: 9.0g - 9.2g with Contrast agent: 50%, Low viscosity Genuine pre-sterilized packaging - Standards: ISO, CE

Tra Vinh General Hospital

Pre-sterilized packaged cement mixer and pump

50

Set

Includes: Cement mixing crank, hopper used to mix cement and solutions (chemicals), cylinder to suck and pump cement, 1 handle, 1 connecting pipe. The product is for single use only, pre-sterilized packaging, Standards: ISO, CE. Origin: European countries

Tra Vinh General Hospital

Lumbar spine brace

5

Set

Material: Titanium alloy Includes: Self-detachable horizontal brace hook, Hexagonal horizontal brace locking screw, length 20 mm - 80 mm, Genuine pre-sterilized packaging. Standards: ISO, CE

Tra Vinh General Hospital

The disc in lumbar spine surgery

30

Female

Material: PEEK, With 2 tantalum markers, Serrated depth: 0.9mm, Bone graft volume: 0.58cc - 1.04cc. Size: Length: 28mm, Width: 11mm, Height: 8mm - 14mm, Curl: 4 degrees. Standards: ISO, CE

Tra Vinh General Hospital

Multi -shaft screws hollow cement pump

100

Female

Material: Titanium alloy with Cobalt Chrome alloy screw caps. Screw diameter from 4.5 mm - 9.5 mm, Length from 30 mm - 80 mm depending on screw diameter, Total screw head height: 17.04 mm, Screw has two thread areas: spongy bone thread area on the screw head with a distance between 2 thread steps of 4 mm and hard bone thread area on the screw head side with a distance between two thread steps of 2 mm, Thread extends to the tapered tip for easy screw driving. There are 6 holes at the screw head that allow cement to pass directly through the stem and the screw holes help to immediately fix cases with poor bone quality. Standard: ISO 13485

Tra Vinh General Hospital

Class snail for single screws, multi -axis two threaded steps

100

Female

Material: Titanium alloy. - Reverse threading technology helps maximize contact between the thread of the internal locking screw and the head of the screw head, automatically breaking when tightened with enough force. The screw has the characteristic of a blunt head that reduces the possibility of misalignment of the axis from the start point to the screw head, Diameter: ≥ 8.86 mm, distance between two thread steps: 1.0 mm, Total height: ≤ 13.5 mm. Standards: ISO, FDA

Tra Vinh General Hospital

The brace is straight along the back of the chest

30

Female

Hard vertical brace 5.5 mm diameter, Material: Titanium alloy, 500 mm long, including a 6 mm hexagonal head used to rotate the brace. There are 2 vertical lines to mark when rotating. Standards: ISO, FDA

Tra Vinh General Hospital

Kim poked cement into the vertebra

100

Female

Needle to inject cement into the vertebral body size 2, capacity 1cc includes: 01 hollow tube, 01 cement push needle with depth measurement mark, 01 push stick with 2 diameters: large proximal end and small distal end, easy to enter the vertebral pedicle. Materials: 304 steel and plastic

Tra Vinh General Hospital

Biological cement with phase solution

30

Package

Biocement with mixing solution includes: - Cement powder: 20g powdered sterilized cement with Barium sulphate 30%, Methyl methacrylate-Styrence-copolymer 68%, Benzonyl peroxide 2% - Solution: 9g liquid in sterile vial with ingredients Methyl methacrylate (mono-mer): 99.1%, N, N-dimethyl-p-toluidine: 0.9%, Hydroquinone 75ppm A type of cement with high viscosity, with light barrier: 30% Barium Sulfate,. Standards: ISO, FDA

Tra Vinh General Hospital

Multi-axis screws of all sizes with internal locking screws

350

Female

Material made of Titanium Small stem design helps minimize collision with soft tissue; Multi-directional rotating screw with rotation angle up to ≥ 65 degrees around the screw body; The screw body has self-tapping double helical threads; Diameter sizes range from: 4.0mm -8.0mm; Length from 30mm to 95mm; Internal locking screws made of titanium with reverse thread are compatible with uniaxial and multiaxial screws with double helical threads; The inner diameter is designed in a hexagonal shape; Meets standards: FDA, ISO, CE.

Tra Vinh General Hospital

Multi-axis sliding screws of all sizes with internal locking screws

70

Female

Material made of Titanium Small stem design helps minimize collision with soft tissue; The Screw Head is designed to be longer and consists of 2 parts to reduce compression force and insert the Rod easily. After tightening with enough force, part of the screw head will break and fall off; Multi-directional rotating screw with rotation angle up to ≥65 degrees; The screw body has double helical threads, self-tapping; Diameter sizes range from: 4.0 mm - 8.0 mm; Length from 30 mm to 95 mm; Internal locking screw made of Titanium; Double thread design with reverse thread arm, compatible with long tail sliding screws; The inner diameter is designed in a hexagonal shape; Meets standards: FDA, ISO, CE.

Tra Vinh General Hospital

Vertical splint

100

Female

Material made of Titanium Cylindrical design, used with single-axis and multi-axis screws with double helical thread; Vertical brace has a diameter of 5.5 mm, length ≥ 480 mm; Meets standards: FDA, ISO, CE

Tra Vinh General Hospital

Horizontal brace

10

Female

Titanium-; The stiffener design can be adjusted to the appropriate length from 33 mm to 90 mm, helping to minimize pressure on the dura mater; Meets standards: FDA, ISO, CE

Tra Vinh General Hospital

Lumbar spine grafts of all sizes

50

Female

Material made of PEEK-Titanium, curved design with joints helps the disc to rotate to the final position safely and accurately; There is a joint at the top of the disc made of Titanium, which helps rotate the disc 90 degrees easily, hugging the vertebral body. Pyramid-shaped tooth surface, helps prevent disc slippage and grip tightly; Has Tantalum radiopaque line; Large bone-filled frame with anterior and posterior holes supports blood circulation. Disc length 28 mm and 32 mm; Width 9mm -11mm. Height from 7mm to 16mm. Degree of curvature: 0 degrees, 5 degrees and 8 degrees; Meets standards: FDA, ISO, CE.

Tra Vinh General Hospital

Hollow multi-axle screw with internal locking screw

200

Set

Multi-axis hollow screw with cement pump barrel, screw head with self-tapping square thread, rotation angle ± 30 degrees, screw body with tapered conical design. Screw cap height: 16.6 mm, screw cap width: 13.18 mm. Screw caps are thin, low, square thread pitch, thread opening angle is 12 degrees and spaced 0.51± 0.05mm. On the screw body there are 2 thread pitch areas: the spongy bone area is 2.5 mm and the hard bone area is 1.5 mm, the angle between the two thread rings is 62 degrees. Screw material is titanium alloy. Size: includes sizes 4.5 mm - 8.5 mm, length from 25 mm to 60 mm. There are 3 vertical rows of cement drainage holes with 3,4 or 5 cement drainage holes in each row depending on the screw length. Cement pump hole diameter is ≥ 1.2 mm, The internal locking screw is compatible with the screw. The locking screw has a square thread pitch, locking screw height is 4.6 mm, Material is titanium alloy. Originated from G7 countries. ISO 13485 standard

Tra Vinh General Hospital

Multi-axis screw with internal locking screw

100

Set

Screw material is titanium alloy. Self-tapping multi-axis screw, rotation angle ±30 degrees, with tapered screw head design. Thin, low screw head, square thread pitch, thread opening angle of 12 degrees. On the screw body with a thread pitch of 2.5 mm, the angle between the two thread rings is 62 degrees. Size: 4.5 mm - 10.0 mm, length from 25 mm to 60 mm Locking screw in titanium material. Compatible with multi-axis screws, has horizontal thread pitch with 12 degree opening angle, with hexagonal hole. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Vertical thoracic spine brace with diameter of 6.0 mm of all types

30

Female

Vertical brace made of titanium, diameter 6.0 mm, length 65 mm - 95 mm. Standard: CE, Origin G7

Tra Vinh General Hospital

Spinal disc graft

40

Female

Material: PEEK. The puzzle piece is curved, the top of the puzzle piece has rounded edges. The surface has inclined teeth. There are 3 non-radioactive Tantalum material markers. Large bone graft cavity has a volume of 0.7 ml to 2.2 ml. - Dimensions: Length 29 mm - 34 mm, width: 11 mm -16 mm Height from 7 mm to 14 mm, angle 5°. ISO 13485 standard

Tra Vinh General Hospital

Horizontal splint rotates 20 degrees,

8

Female

Lumbar spine braces come in all sizes, from 35 mm to 107 mm long. Material is titanium. There are 3 locking screws, the brace has joints to rotate ±20 degrees. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Spinal multiaxial screws of all sizes with locking screws

150

Female

Material: Titanium alloy, Diameter: 4.0 mm - 8.5 mm, Length: 25 mm - 60 mm. Torsion lock helps reduce horizontal force dispersion on the screw head Screw head with screw head height of ≥16 mm, running height on vertical brace is 9.7 mm, screw head width is ≥ 11 mm. Dual threaded screw body, self-tapping, double thread distance is 6 mm, Screw head rotation angle is 60 degrees, multi-directional rotation. Internal locking screw: Twist lock, square thread 'Anti-rotation design reduces screw thread cross-breaking force Material: Titanium alloy, multi-axis screw compatible. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Multi-axis sliding screw, all sizes with locking screws

5

Female

Multi-axis sliding screw, various sizes Material: Titanium alloy Diameter 5.5 mm - 7.5 mm Length: 30 mm - 55 mm Twist jaw lock, interlocking helical faces help reduce the dispersion of horizontal force on the screw head. Self-tapping screws, 2 threads on the screw body help reduce screw driving time. Double thread distance is 6 mm, angle of inclination between 2 threads ≤ 60 degrees. The screw is designed with a total screw head length of: 31 mm and a portion for sliding the vertebral body of: 15 mm. Rotation angle ≥ 60 degrees and sliding adjustment can be extended Internal locking screw: Titanium alloy, compatible with multi-axis screws - Standard: FDA - USA.

Tra Vinh General Hospital

The horizontal brace is for twisted screws, sizes

25

Female

Material: Titanium: Length: 20 mm - 60 mm, Can be bent - Quality standards: FDA, Origin: G7 countries

Tra Vinh General Hospital

Vertical splint

30

Female

Material: Titanium alloy,' Diameter: 5.5 mm, Length ≥ 500 mm There are guide lines running vertically on the brace. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Straight lumbar spine grafts of all sizes

30

Female

Materials: PEEK, anti-slip reverse tooth surface, Conical head Width: 9 mm - 11 mm, Height: 8 mm - 14 mm, Length: 20 mm -32 mm depending on size, Curvature: 4 degrees, Has 3 opaque points Bone graft cavity volume: ≥ 1.07 cc. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Artificial vertebrae

3

Female

Thoracic vertebrae body used in thoracic spine surgery Titanium material, diameter: 10 mm -24 mm, Height: 6 mm -90 mm, Circular cylinder, can be cut and shaped, can be filled with autologous bone or artificial bone. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Single-axis screws of all sizes with internal locking screws

50

Set

Material: Ti6Al4V titanium alloy. Single-axis self-tapping screw. Diameter 4.0 mm - 9.0 mm: length 20 mm - 55 mm depending on diameter. Screw head: Height ≥ 9.25 mm, width ≥ 9.8 mm, length 13 mm, smooth without damaging soft tissue. Screw neck: Diameter ≥ 5.2 mm, Screw body: Double thread, including four threads at the base of the arch with a thread pitch of 1.4 mm to increase strength against screw extraction and porous bone threads with a thread pitch of 2.8 mm. Internal locking screws are made of Ti6A14 titanium alloy material. Standards, CE, ISO 13485. Origin: G7 countries

Tra Vinh General Hospital

Multi-axis screws of all sizes with internal locking screws

80

Set

Material: Ti6Al4V titanium alloy, Self-tapping multi-axis screw, 30° multi-directional rotation angle. Diameter 4.0 mm - 8 mm, length 25 mm - 60 mm depending on diameter Screw head: Height ≥ 13.9 mm x width ≥ 9.8 mm x length 13 mm, smooth without damaging soft tissue, Screw neck: Diameter ≥ 5.2 mm, reinforced to reduce the risk of breakage. Screw body: Dual threads, including four threads at the base of the arch with a thread pitch of 1.4 mm to increase strength against screw extraction and a porous bone thread with a thread pitch of 2.8 mm. Comes with internal locking screws made of Ti6A14V titanium alloy material. Quality standards: CE, ISO 13485. Origin: G7 countries

Tra Vinh General Hospital

Long vertical brace

20

Female

Material: Ti6Al4V titanium alloy Diameter 5.5 mm, length from 40 mm - 500 mm. - Quality standards: CE; ISO 13485.Origin: G7 countries

Tra Vinh General Hospital

Square connecting bar with locking screws

10

Female

Material: Ti6Al4V titanium alloy, Diameter: 5.5 mm, Height: 11 mm - 11.2 mm, Width: 14.5 mm - 15 mm, Length: 19 mm. Square connecting bar with locking screw has screw hole to tighten with Ø 5.5 mm vertical bar. Sterilized before surgery, Quality standards: CE, ISO 13485. Origin: G7 countries

Tra Vinh General Hospital

Lumbar spine grafts of all sizes

10

Female

Vật liệu : PEEK. Height : 8 mm - 14 mm, Width 11 mm, length 32 mm - 34 mm Curved design with markers for X-rays, increased stability thanks to anti-movement oriented grooves and 2 large compartments for bone insertion. Ready to sterilize. Quality standards: CE, ISO. Origin: G7 countries

Tra Vinh General Hospital

Horizontal splint with locking screws

5

Female

Material: Ti6Al4V titanium alloy. Diameter 5.5 mm: length 45 mm - 85 mm The horizontal bar has a fixed end and a removable end with adjustable length, easily connecting to the Ø 5.5 mm vertical bar. 01 Lock screw: Material: Titanium alloy Quality standards: CE, ISO. Origin: G7 countries

Tra Vinh General Hospital

Multi-directional horizontal splint with locking screws

5

Female

Brace: material: Ti6Al4V titanium alloy, Diameter 5.5 mm: length 45 mm -75 mm, 10 mm increments. The horizontal bar has a fixed end and a multi-directional rotating end, flexible in size and rotation angle, easily connected to the Ø 5.5 mm vertical bar. Locking screw: Material: titanium alloy compatible with braces. Quality standards: CE, ISO.Origin G7 countries

Tra Vinh General Hospital

Hollow lumbar spine screw, with internal locking screw

80

Set

Used in minimally invasive lumbar and thoracic spine surgery Material: Ti-6Al-4V, self-tapping screw bit. Diameter: 5.5 mm-7.5 mm, length 30 mm-60 mm, screw head length 77 mm -127 mm, Screw cavity: hollow, cavity diameter ≥ 1.8 mm, use 1.6 mm k-wire guide Internal locking screw diameter 9.7 mm, length 5.6 mm. Standards: ISO, FDA

Tra Vinh General Hospital

Vertical brace used for hollow multiaxial screws

20

Female

Material: Titanium Size: Diameter 5.5 mm, length 40 mm-200 mm Technical characteristics: Vertical brace for hollow multiaxial screws, smooth vertical bar type. Standards: ISO, FDA

Tra Vinh General Hospital

The backbox adjusts the height

10

Female

Material: Titanium. The disc has a small bullet-shaped head design, curvature 0º, 8º, 15º, the disc can be adjusted in height, the tool has a force limit to control the height accurately. Size : - Type 8mm-12mm high (Maximum increase 4mm): Disc 11mm wide, 27mm long (closed), 22mm long (expanded) - Type 10mm-14mm high (Maximum increase 4mm): Disc 11mm wide, 28mm long (closed), 22mm long (expanded) Pre-sterilized packaging. Comes with tools & technical support during use. Standard of offered goods achieved: ISO, FDA

Tra Vinh General Hospital

Standard multi-axis screw

50

Female

Material: Titanium, Screw shank diameter: from 4.0 mm to 8.5 mm, Screw shank length from 20 mm to 60 mm in 5 mm increments.

Tra Vinh General Hospital

Multi -axis screws of all sizes

70

Female

Material: Titanium, Double threaded screw with different thread pitch. Screw shank diameter from 4.0 mm to 8.5 mm, 0.5 mm increments. Screw shank length from 20 mm to 60 mm in 5 mm increments.

Tra Vinh General Hospital

Compression screw

30

Female

Materials: Titanium. Screws have double threads with different thread pitch, screw body is coated with HA (Hydroxylapatite) Screw body diameter: from 4.0 mm to 8.5 mm, Screw body length: from 20 mm to 60 mm, step in 5 mm increments.

Tra Vinh General Hospital

Lock snail

150

Female

Diameter from 7 mm to 11 mm. Compatible with screws and vertical braces of all sizes,

Tra Vinh General Hospital

Vertical splint

15

Female

Material: Titanium, Diameter: 5.5 mm, Length ≥ 100 mm

Tra Vinh General Hospital

Lumbar spine grafts of all sizes

30

Female

Materials: PEEK and Titanium, Diameter/Height: 7 mm to 17 mm, 1 mm increments, Length: 24 mm to 34 mm.

Tra Vinh General Hospital

Artificial vertebrae are adjustable in length

5

Female

Materials: Titanium. The mental part is cylindrical, has a hollow cavity for bone grafting, and the bone cage can be increased and adjusted in length. Diameter: 12 mm - 14 mm. Length: from 18 mm to 60 mm.

Tra Vinh General Hospital

Two-step threaded thoracolumbar multiaxial screw

200

Female

Material: Titanium alloy with Cobalt Chrome screw caps, Diameter from 4.0 mm to 9.5 mm, Length from 20 mm -100 mm, Screw cap height ≥14.8 mm, Screw cap width ≥10.4 mm. The screw has 2 thread steps: The porous bone thread on the screw head with a distance between 2 thread steps of 4 mm and the hard bone thread on the screw head with a distance between the two thread steps of 2 mm. Thread extends to tapered end for easy screwing. Standards: ISO, FDA

Tra Vinh General Hospital

Internal locking screws for two-step threaded thoracolumbar spine screws

200

Female

Material: Titanium alloy, Distance between two thread steps 0.9 mm, Thread diameter ≥ 7.86 mm, Height after breaking the internal locking screw head ≥ 4.85 mm, Self-breaks when tightened with enough force - Standards: ISO, FDA

Tra Vinh General Hospital

Artificial disc piece

40

Female

Material: PEEK, Bullet-shaped tip, with teeth. Number of radiopaque markers: 4 points. Length: 25 mm - 30 mm, Height: 7 mm -15 mm, Front / rear width: 10 mm, Curve: 6 degrees Bone graft cavity ranges from: 0.3 cc - 1.17 cc depending on size. Packed in a sterilized box. There are 2 tool attachment heads for mounting straight at 0 degrees or at an angle of 15 degrees. Standards: ISO, FDA

Tra Vinh General Hospital

The brace is straight along the back of the cobalt chrome alloy spine

50

Female

Material: Cobalt Chrome alloy Diameter 4.75 mm, length ≥ 500 mm, straight type, Standard: ISO, FDA

Tra Vinh General Hospital

Hollow multi-axle screw with internal locking screw

100

Female

Material: Ti6Al4V titanium alloy, diameter 4.5 mm - 8.0 mm with length from 25 mm - 100 mm depending on diameter. Screw neck: 5.2 mm diameter, smooth without damaging soft tissue, Screw body: Double thread, including four threads at the base of the arch with a thread pitch of 1.4 mm to increase strength against screw extraction and porous bone threads with a thread pitch of 2.8 mm to not weaken bones when performing spine surgery. Screw head ≥ 13.9 mm, width ≥ 9.8 mm, length 13 mm - 14 mm, multi-directional rotation angle of 30° on each side. The hollow screw body can be used to pump cement through Quality standards: CE; ISO 13485.Origin: G7 countries

Tra Vinh General Hospital

Multi-axis hollow screw with long screw tail and internal locking screw

100

Female

Material: Ti6Al4V titanium alloy. Multiaxial hollow screw, long screw tail with horizontal exit hole used in minimally invasive spine surgery and vertebroplasty cement injection, self-tapping, multidirectional rotation angle of 30° on each side. Diameter: 4.5 mm - 8.0 mm; length 25 mm → 70 mm. Screw neck: 5.2 mm diameter, reinforced to reduce the risk of breakage, smooth and does not damage soft tissue, Screw body: Double thread, including four threads at the base of the arch with a thread pitch of 1.4 mm to increase strength against screw extraction and spongy bone thread with a thread pitch of 2.8 mm that does not weaken bones when performing spinal surgery, with internal locking screws made of titanium alloy material Ti6A14V. Quality standards: CE, ISO 13485.Export Origin: countries in the G7 block

Tra Vinh General Hospital

Lumbar spinal disc

15

Female

Materials: PEEK. Height: 7mm → 14mm. Width: ≥ 11 mm, curvature 4° and 6°, Length: 30 mm. Bullet shaped, tapered at one end for easy insertion into the vertebrae, wide bone cavity and anti-movement grooves. Quality standards: CE, ISO 13485. Origin: G7 countries

Tra Vinh General Hospital

Vertical bar for minimally invasive surgery is 30 mm-200 mm long

80

Female

Material: Ti6Al4V titanium alloy. Diameter 5.5 mm, length from 30 mm -200 mm. Standard: ISO 13485, CE. Origin: G7 countries

Tra Vinh General Hospital

Kim makes raw stalks

25

Box

Materials: Stainless steel and polymer (medical plastic), - The needle is designed with 2 diameters: a small diameter at the nose and a larger diameter at the back, making it easy to insert the needle into the vertebral body through the pedicle. The handle has a detachable lock, has graduations on the body of the tool, Length 150 mm Consists of two parts: the outer needle with a diameter of ≥ 4.19 mm and the inner barrel with a diameter of ≥ 3.17 mm Packed 02 pieces/box. Includes 01 beveled needle, 01 trocar needle, packaged sterilized. Standards: ISO, FDA

Tra Vinh General Hospital

Multi -axis screws through the skin

100

Female

Colbalt Chrome screw cap with Titanium crown, Titanium alloy screw body, Hollow barrel screw, diameter from 4.5 mm - 8.5 mm, Screw length from 35 mm - 80 mm depending on screw diameter. The screw has two threads to increase fixation to the bone, suitable for spongy bone areas and hard bone areas. Standards: ISO, FDA

Tra Vinh General Hospital

Lock snail

100

Female

Material: Titanium alloy, Distance between two thread steps 0.9 mm, Thread diameter ≥ 7.86 mm, Height after breaking the internal locking screw head ≥ 4.85 mm, Self-breaks when tightened with enough force - Standards: ISO, FDA

Tra Vinh General Hospital

Vertical brace pre-curved through the skin of the thoracic and back spine

50

Female

Material: Cobalt Chrome, Diameter: 4.75 mm, Pre-bent, Length from 30 mm - 90 mm Synchronized with percutaneous hollow multiaxial thoracic/lumbar spine screws and percutaneous internal locking screws Standards: ISO, FDA

Tra Vinh General Hospital

Artificial bone

5

Jar

Chemical composition: 15% Hydroxyapatite and 85% beta-Tricalcium Phosphate. Uniform 3-dimensional foam structure, chemical composition similar to human bones. Particle size: 1.6 mm - 3.2 mm, Particle porosity: 80%. with an average cavity size of 500 microns and a pore diameter of 125 microns. Capacity 10cc. Good biocompatibility with the body Forms new bone within 6 months. Standards: ISO, FDA,

Tra Vinh General Hospital

Tilted lumbar disc.

25

Female

Material: PEEK, Bullet-shaped tip, with teeth. Number of radiopaque markers ≥ 04 points, Length 25 mm - 30 mm, Height 7 mm - 15 mm, Width ≥ 10 mm, Curvature ≥ 6 degrees, Surface area 130 mm2 -156 mm2 Bone graft cavity from: 0.3 to 1.1 cc depending on size. Packed in a sterilized box. There are ≥ 2 tool attachment heads for placement, including 0 degree straight mounting or 15 degree inclined mounting. Standards: FDA, sterilized packaging. Origin: G7 countries

Tra Vinh General Hospital

Cement-injected hollow multiaxial screws used in minimally invasive spine surgery

75

Female

Hollow multiaxial screw, double thread pitch, used in minimally invasive lumbar spine surgery of all sizes. Materials: Titanium alloy. Screw body diameter ranges from 5.0 mm - 7.5 mm, length ranges from 30 mm - 90 mm, Minimum tilt: 20º, rotation angle 40º. Hollow structure, 1/3 of the screw head has ≥ 6 holes to inject cement into the vertebral body. Double threaded screw body, divided into 2 parts: sharp thread and blunt thread, Quality standard: ISO 13485, Sterilized packaging

Tra Vinh General Hospital

The vertical bar is available for screws through the skin and cement pump

15

Female

Pre-bent vertical bars for percutaneous screws and cement injection. Materials: Titanium alloy. Diameter: 5.5 mm. Length: 50 mm to 170 mm Pre-bent, one end of the vertical rod is pointed to penetrate skin and muscle. One end has a horizontal groove for permanent installation with an inlet adjustment tool. Quality standards: ISO 13485, Sterilized packaging

Tra Vinh General Hospital

Self-fractured internal locking screws are used in minimally invasive cement injection surgery

75

Female

Materials: Titanium alloy. diameter 3.7 mm x 9 mm. Has a one-way screw thread design, the external thread matches the internal thread of the screw head, avoiding self-unscrewing and preventing it from coming out. Designed with a star-shaped lock head to avoid slipping and sliding when tightening. Quality standards: ISO 13485 Sterilized packaging

Tra Vinh General Hospital

Curved lumbar spine disc, sizes

15

Female

Curved lumbar spinal disc, various sizes Material: PEEK. Bean-shaped inlet, with 3 Tantalum radiopaque points. Curvature: 0º, 5º corresponding to height 7 mm - 15 mm. Width: 10 mm -12 mm, length: 27 mm - 33 mm, Curved shape according to the structure of the disc cavity, on the body there is a pyramid-shaped tooth system to help prevent slipping. There is 1 bone graft cavity. From the attachment axis of the disc, the tilt angle when attaching the disc can be adjusted from 0º - 90º to increase flexibility when implanting. Quality standards: ISO 13485 Sterilized packaging

Tra Vinh General Hospital

The needle pushed the cement into the empty screw body

75

Female

The probe needle pushes the cement into the hollow screw body - Materials: Alloy, medical plastic. - The needle pushes into the hollow screw body and has a core inside to push the cement. The needle is fixed with a hollow screw and has a small hole to increase the pressure for cement injection and the hollow screw body, 175 mm long, can lengthen the pump barrel twice. The hollow barrel of the needle can hold 1.2 ml of cement mixture for 1 injection of cement. Used to stuff cement into the cement pump screw, avoiding cement reflux. Quality standards: ISO 13485* Packaging and sterilization.

Tra Vinh General Hospital

Granular artificial bone 5cc-10cc

10

Jar

Irregular granular artificial bone 5cc-10cc. Ingredients: Synthetic bone contains 75% HA (hydroxyapatite and 25% β TCP (Beta-Tricalcium Phosphate/Calcium Sulfate [Ca3(PO)4] with porosity. Density: ~ 0.7 g/cm3. Porosity density: 60% - 80%. 3D frame structure, molecular size 200 µm-500µm, compression force > 0.2 MPa. Completely absorbed within 12 months, increasing enhance bone tissue response. Quality standards: ISO 13485; CE Sterilized packaging.

Tra Vinh General Hospital

Bone cement used in vertebral body reconstruction

30

Package

Cement includes: 1 package of cement powder: 20 g - 21 g + 1 glass bottle containing solvent: 9 g - 9.2. Powder package includes: 64.4% Polymethyl Methacrylate; 0.54% Benzoyl Peroxide; 25.01% Barium Sulfate and 10.01% Hydroxyapatite. Solvent bottle includes: 97.6% Methyl Methacrylate; 2.4% N-N dimethyl-p-toluidine; 20ppm Hydroquinone. Low viscosity, Optical blocking agent: 35%. Quality standards: ISO 13485 Sterilized packaging

Tra Vinh General Hospital

Percutaneous minimally invasive multiaxial spinal screws

100

Female

Material: Titanium alloy Used in minimally invasive surgery through the skin, has a double locking system. Size: Tail length 120 mm Diameter 5.0 mm-7.5 mm length 25 mm-100 mm Standard: ISO, CE

Tra Vinh General Hospital

Intravertebral locking screws involve minimal percutaneous intervention

100

Female

Material: Titanium alloy Compatible with screws with a length of 120 mm. Size: outer diameter 10.6 mm, height 4.7 mm. Standards: ISO, CE

Tra Vinh General Hospital

The bending vertical brace

30

Female

Material: Titanium alloy, Pre-bent longitudinal brace, One pointed end, one flat end and round hole Size: 5.5 mm diameter, 40 mm-90 mm long Standard: ISO, CE

Tra Vinh General Hospital

Lumbar spinal disc, curved type, various sizes

20

Female

Material: PEEK Curved shape of the disc, There are 2 large cavities containing bones There are 3 titanium markers. Size: Height: 7mm-16mm, Length: 28mm, Width: 9mm, Tilt: 7 degrees - Pre-sterilized packaging, Standards: ISO, CE

Tra Vinh General Hospital

The set of endoscopic entrance through the conjugate hole has 3 sizes of bones, thin

10

Set

Access set for spinal endoscopy through the foramina of gum: 01 needle size 21G, material: Stainless steel, 03 syringe sizes 2ml, 5ml, 10ml, materials: Polypropylene and Polyethylene, 01 Contrast injection needles size 18G and 21G, material: Stainless steel, 3 sizes of reamers, material: stainless steel, 01 With guide rod material: Nitinol. Standard: ISO/CE

Tra Vinh General Hospital

Water pumps and spine endoscopy pumps

10

Female

Water pump set used with endoscopic spinal pump: Length ≥ 5.5 m, Material: Silicon. Standard: ISO/CE

Tra Vinh General Hospital

Coarse diamond bone grinding blade

10

Female

Coarse diamond bone grinding blade for spinal endoscopy: Length 265 mm, shank diameter 4.5 mm, spherical tip 4.4 mm, Material: Stainless steel body, diamond coated tip. Standard: ISO/CE

Tra Vinh General Hospital

Ball nose bipolar high frequency burner

10

Female

Bipolar high-frequency burner for spinal endoscopy: Ball nose, length 275 mm, diameter 2.5 mm, Material: body and tip: Stainless steel, Insulation Standard: ISO/CE

Tra Vinh General Hospital

Multi-axial screws in neck and back chest with internal locking screws

50

Set

Titanium alloy material includes: Self-tapping multi-axial rear screw. The screw has a thread pitch of 1.25 mm, a thread width of 0.7 mm, and a 55 degree angle. The threaded end is 1.67 mm from the screw tip, the screw head is open at an angle of 20 degrees. Screw diameter is 3.5 mm -5.5 mm, length is 10 mm -55 mm. The internal locking screw has a rounded thread at the head with a radius of 0.2 mm and an angle of 45 degrees. The locking screw has an additional screw cap. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Vertical braces of sizes 200 mm - 240 mm

10

Female

Titanium/CoCr alloy material. Straight vertical brace, diameter 4.0 mm, length 200 mm to 240 mm, flat or hexagonal head. The brace can be bent 90 degrees. Standard: CE, Origin: G7 countries -

Tra Vinh General Hospital

Chest-cervical brace, rotation angle ± 20 degrees

10

Female

Rod - rod horizontal splint has a diameter of 4.0 mm. Length from 34 mm to 59 mm. Rotation angle ± 20 degrees. Titanium alloy material. Standard: CE, Origin: G7 countries

Tra Vinh General Hospital

Posterior cervical spine multiaxial screw with locking screw

50

Female

Material: Titanium Alloy Ti-6Al-4V The screw can change the angle between the screw body and head. The rotation angle varies from 0 degrees to 60 degrees. Diameter 3.5 mm and 4.0 mm. Length: from 10 mm to 32 mm. Internal locking screw, diameter 6 mm, threaded on the screw body to prevent unscrewing and thread climbing, Quality standard: ISO. Pre-sterilized, individually packaged

Tra Vinh General Hospital

The brace is along the back of the neck

25

Female

Material: Titanium Alloy Ti-6Al-4V Diameter: 3.5 mm; 4.0 mm. Length < 100 mm. Quality standards: ISO 13485:2016. Pre-sterilized, individually packaged

Tra Vinh General Hospital

Multi -directional cervical spine screws

150

Female

4.0 mm diameter screw: length from 11 mm-17 mm, inner diameter 2.4 mm, outer diameter 4.0 mm - 4.5 mm diameter screw: length from 11 mm-17 mm, 2 mm increments, 2.9 mm inner diameter, 4.5 mm outer diameter Tilt angle of unidirectional screw: 12 degrees up/down, 6 degrees inside to outside. Tilt angle of multi-directional screw: 22 degrees/-2 degrees up/down; 17 degrees/4 degrees inside to outside. Standards: ISO, FDA

Tra Vinh General Hospital

Neck splint in front of 1 floor

10

Female

Material: Titanium alloy Length from 19 mm to about 30 mm. There is a screw lock on the brace. Turn 90 degrees to lock the screw. There is a defect to determine the middle point of the brace. There is a large hole to observe the graft/bone graft. Brace thickness: ≥2.5 mm, Width: wide area ≤17.8 mm, Vertical curvature radius 184 mm, horizontal curvature radius 25 mm Standards: ISO, FDA,

Tra Vinh General Hospital

2 -storey neck splint

10

Female

Materials: Titanium alloy. Length from about 32.5 mm to 50 mm. There is a screw lock on the brace. Turn 90 degrees to lock the screw. There is a defect to determine the middle point of the brace. There is a large hole to observe the graft/bone graft. Splint thickness ≥ 2.5 mm, Width: wide area ≤ 17.8 mm. Vertical curvature radius 184 mm, horizontal curvature radius 25 mm,Standards: ISO, FDA,

Tra Vinh General Hospital

3 -storey neck splint

4

Female

Material: Titanium alloy, Length from 52.5 mm to 72.5 mm. There is a screw lock on the brace. Turn 90 degrees to lock the screw. There is a defect to determine the middle point of the brace. At the same time, there is a large hole to observe the graft/bone graft. Brace thickness ≥ 2.5 mm, Width: wide area ≤ 17.8 mm. Vertical radius of curvature 184 mm, horizontal radius of curvature 25 mm. Standards: ISO, FDA.

Tra Vinh General Hospital

Artificial disc graft used in cervical spine surgery

24

Female

Material: PEEK Design conforms to the anatomical structure of the body. - Two toothed surfaces, Number of radiopaque markers: 3 points made of Titanium material, Width: 11 mm, 14 mm, Height: 4 mm - 8 mm, - Depth: 11 mm, Curvature: 4 degrees - 6 degrees, Bone graft cavity capacity: 0.12cc - 0.26cc, - Packed in a sterilized box. Standards: ISO, FDA

Tra Vinh General Hospital

Cervical spinal discs are used independently with screws

10

Set

1-Anterior cervical disc brace: Shape: Trapezoidal, with anti-slip teeth on both sides, 2 holes for screws with hard bone thread and spongy bone thread with screw locking rotation, Material: PEEK, Size: 15mm x 12mm and 17x14mm, Height: 5mm - 10mm, Thickness: back edge 2.5mm - 3.8mm, Tilt: 6 degrees. Number of radiopaque markers: 2 points made of Titanium alloy material, Bone graft cavity: 0.31cc - 0.97cc 2'- Self-drilling screw: Material: Titanium alloy, Designed with two parts: hard bone thread and porous bone thread, Diameter 3.5mm and 4.0mm, - Length: 11mm - 15mm. Meets FDA and ISO 13485 standards

Tra Vinh General Hospital

Artificial bone

10

Jar

Chemical composition: 15% Hydroxyapatite and 85% beta-Tricalcium Phosphate. Physical structure: Uniform 3-dimensional porous structure, chemical composition similar to human bones, Particle size: 1.6 mm - 3.2 mm. Particle porosity: 80%. Capacity 10 cc. Good biological compatibility with the body, New bone formation within 6 months, Standards: ISO, FDA,

Tra Vinh General Hospital

Cervical spine screws first

50

Female

Material Titanium alloy TA6V, Screw diameter 4 mm - 4.5 mm, length 10 mm - 22 mm, self-drilling/self-tapping. ISO quality standards; CE

Tra Vinh General Hospital

Anterior cervical spine brace

25

Female

Titanium alloy material provides high durability with thin thickness, Simple locking mechanism. Locking screw rotates 90 degrees for locking, Length: 17 mm – 90 mm ISO 13485, EC and FSC standards

Tra Vinh General Hospital

1-layer brace

5

Female

Pre-bent single-layer anterior neck brace. Titanium alloy TA6V material, has 4 holes, 1.8 mm thick, 17 mm widest part, length 21 mm-31 mm. ISO quality standards; CE

Tra Vinh General Hospital

2-layer brace

5

Female

Pre-bent two-layer front neck brace. Material Titanium alloy TA6V, has 6 holes, thickness 1.8 mm, widest part 17 mm, length 36 mm-51 mm ISO quality standards; CE

Tra Vinh General Hospital

3-layer brace

5

Female

Pre-bent three-layer anterior neck brace. Material Titanium alloy TA6V, has 8 holes, thickness 1.8 mm, widest part 17 mm, length 56 mm-76 mm ISO quality standards; CE

Tra Vinh General Hospital

4-layer brace

5

Female

Pre-bent four-layer anterior neck brace. Titanium alloy TA6V material, has 10 holes, 1.8 mm thick, 17 mm widest part, length 81 mm-101 mm. ISO quality standards; CE

Tra Vinh General Hospital

Cervical spinal disc

15

Female

Material: PEEK, convex design Self-retaining teeth to grip end plates tightly, 3 tantalum markers, height: 4mm- 8mm. Depth: 2mm -14mm; Width: 14 mm - 16 mm, Physiological spine curvature: 0°, 4°, 6°. ISO 13485, EC standard

Tra Vinh General Hospital

Neck splint in front of 1 floor

25

Female

Material: Titanium Alloy Ti-6Al-4V Length: From 25 mm to 34 mm. Brace thickness: From 1.7 mm to 2.2 mm Width: From 16 mm to 20 mm. . Quality standards: ISO. Disassembled, individually packaged

Tra Vinh General Hospital

Cervical spine screws first

100

Female

Material: Titanium Alloy Ti-6Al-4V ELI Comes with an anterior cervical spine brace that helps fix the cervical spine brace to the vertebral body. Diameter 3.5 mm - 4.5 mm. Length from 10 mm to 20 mm. Quality standards: ISO. Disassembled, individually packaged

Tra Vinh General Hospital

The cervical spine disc first

25

Female

Materials: PEEK and Titanium Alloy Ti-6Al-4V Trapezoidal design. The upper and lower surfaces have serrated teeth to help the disc adhere firmly to the surface of the vertebral body. Diameter/Height: 4 mm - 14 mm. Width: 15 mm, Depth: 12 mm, . Quality standards: ISO. Disassembled, individually packaged

Tra Vinh General Hospital

Controlled pressure meter pump set for spinal body shaping

30

Set

Controlled pressure meter pump set for spinal body shaping Materials: Alloy, medical plastic. The cylinder has a pressure gauge displayed on an LCD screen that shows the pressure level used to restore the spine. Maximum allowable pressure 300 psi. Maximum pushing pressure is 30 ATM/bar. Solution volume is 20 mml. There is a lock to adjust pressure increase and decrease. There is a scale to mark the measurement circuit to help predict the amount of cement required with the amount of liquid injected into the spine. There is a locking guide wire that is connected to the spinal balloon dilator. Quality standards: ISO 13485. Packaging: sterilized

Tra Vinh General Hospital

Balloon dilation used in vertebral body shaping

6

Female

Expansion balloon used in vertebral body shaping. Materials: Alloy, medical plastic. The ball can withstand a maximum force of 300 psi. Balloon length: 10 mm - 20 mm x Pipe length: 120 mm. There are 2 radiopaque points. There is a marking bar to help balance the amount of cement injected into the spinal body. Quality standards: ISO 13485

Tra Vinh General Hospital

No. 2 blunt-nosed puncture needle is used in shaping the vertebral body with a shadow

30

Female

No. 2 blunt probe needle used in vertebral body reconstruction. Materials: Alloy, medical plastic, T-shaped handle, positioning needle and dilator. Diameter: 4.2 mm Length: 120 mm. The oblique angle is designed to easily penetrate the cortical bone. Lockable chuck handle. A laser marker allows control of penetration depth. Quality standards: ISO 13485

Tra Vinh General Hospital

Biopsy

5

Female

Biopsy needle Materials: Alloy, medical plastic. Biopsy needle, T-handle and barrel. Diameter: 3.4 mm, Length: 120 mm. Used for spinal biopsy, and support for spinal cement injection. There is a tick bar. Lockable chuck handle. A laser marker allows control of penetration depth. Quality standards: ISO 13485

Tra Vinh General Hospital

No. 1 beveled probe needle used in cement injection set for vertebral body shaping

60

Female

Materials: Alloy, medical plastic, beveled needle, T-handle and barrel (trocar). Diameter: 3.0 mm, Length: 120 mm. The bevel angle is designed to easily penetrate the cortical bone. Lockable handle. A laser marker allows control of penetration depth. Quality standards: ISO 13485

Tra Vinh General Hospital

The needle pushes the cement into the vertebral body

60

Female

Needle to push cement into vertebral body Materials: Alloy, medical plastic, needle to push cement, T-handle and barrel (trocar). Diameter: 3.4 mm, Length: 120 mm. There is a marking bar to help balance the amount of cement injected into the spinal body. Lockable chuck handle. A laser marker allows control of penetration depth. Used to push cement into the spinal body, avoiding cement reflux. Quality standards: ISO 13485

Tra Vinh General Hospital

The drill needle creates a groove into the vertebral body

60

Female

Drill needle creates grooves into the vertebral body. Materials: Alloy, medical plastic. Dimensions: Diameter: 3.5 mm, Length: 120 mm. Used to create drilling grooves into the spinal body to support balloon injection to shape the spinal body. T-handle. A laser mark allows control of penetration depth. Quality standard: ISO 13485

Tra Vinh General Hospital

The bow stalk guide tree

60

Female

Guide rod with blunt tip. Material: Medical alloy. Pointed or blunt end. Diameter: 1.0 mm, Length: 265 mm. Oblique angle designed for easy penetration through cortical bone. Guides support into the vertebral body more easily. A laser marker allows control of penetration depth. Quality standards: ISO 13485

Tra Vinh General Hospital

Cement mixing and distribution pump set

30

Female

Materials: high quality medical plastic (with stainless steel components) - The cement pump system consists of 6 parts including: T-shaped cylindrical cement push pump, with pressure adjustment lock, Locking cover connecting the cement wire connector. The cement mixing bar includes 1 end connected to a locking cap, 1 end with a spring shape, Cement push rod, Pressure reducing connection wire used to guide cement, Cement hopper and mixing solution, Mixer Volume 30ml, pump pressure 30 atm. Quality standards: ISO 13485

Tra Vinh General Hospital

Bone cement used in vertebral body reconstruction

60

Package

Cement includes: 1 package of cement powder: 20g-21g + 1 glass bottle containing solvent: 9g-9.2. Powder package includes: 64.4% Polymethyl Methacrylate; 0.54% Benzoyl Peroxide; 25.01% Barium Sulfate and 10.01% Hydroxyapatite. Solvent bottle includes: 97.6% Methyl Methacrylate; 2.4% N-N dimethyl-p-toluidine; 20ppm Hydroquinone. Low viscosity, Optical blocking agent: 35%. Quality standards: ISO 13485 Sterilized packaging

Tra Vinh General Hospital

Chemical cement shapes the vertebral body

200

Female

Ingredients: Powder bottle: 27.0g - 27.2g: Including 45% Zirconium dioxide and 5% Hydroxyapatite, solution: 9.0g - 9.2g with Contrast agent: 50%, Low viscosity Genuine pre-sterilized packaging - Standards: ISO, CE

Tra Vinh General Hospital

Kim poked the cement pump into the vertebra body

400

Female

Material: Stainless steel, Size: 2 types: 11 G and 13 G, length 125 mm, Genuine pre-sterilized packaging. Standards: ISO, CE

Tra Vinh General Hospital

Pre-sterilized packaged cement mixer and pump

150

Female

Includes: Mixing tank with cement mixing handle, funnel used to mix cement and solutions (chemicals), cylinder to suck and pump cement, 1 handle, 1 connecting pipe. The product is for single use only, pre-sterilized packaging, Standards: ISO, CE. Origin: European countries

Tra Vinh General Hospital

The shadow of the vertebra body

20

Female

Balloon dilation: Size: Initial length 10 mm -20 mm. Maximum expansion pressure 350 psi, maximum expansion volume 3 - 5 -7 cc, expansion width 14mm-17mm-19 mm, length after expansion 16-mm 34mm. Standards: ISO, CE

Tra Vinh General Hospital

High pressure pump

20

Female

Cylinder volume 20 ml, Lockable, High pressure connection with 3-way valve, - Standards: ISO, CE

Tra Vinh General Hospital

The set of needles and pumping cement into the vertebra body

40

Female

Includes: 3 needles to store and push cement: needle to push cement, 2.9 mm, length ≥ 230.3 mm, needle to contain cement, 3.5 mm, length ≥ 213.3 mm. 1 needle to create an empty bone cavity: diameter 3.5 mm, length ≥ 233.7 mm. 1 dilation and expansion needle: 4.3 mm diameter dilation needle ≥ 166.1 mm long, 3.8 mm diameter expansion needle ≥ 184.9 mm long, 1 awl needle: 3.0 mm diameter ≥ 157.5 mm long, 1.9 mm diameter ≥ 160.8 mm long, 2 guide wires: 1.8 mm length ≥ 270 mm.Standards: ISO, CE

Tra Vinh General Hospital

Kim makes raw stalks

150

Female

Includes: Beveled needle and trocar, Locking handle, 11G x 125 mm, With depth control markers Material : Medical alloy, Standard: CE

Tra Vinh General Hospital

Kim makes raw stalks

250

Female

Spinal puncture needle: Material: 304 steel and medical plastic, including: diamond tip needle and trocar, size 11 Gauge, Standards: ISO, FDA

Tra Vinh General Hospital

Cement push pressure pump with mixing

250

Female

The shineless cement pumping system consists of 06 parts: 01 mixer equipped with a mixing blade with epicyclic rotation, with an opening window on the side to install the cylinder, 01 hopper for pouring cement and mixing solution, 01 piston to push cement into the cylinder, 01 cylinder containing cement connected to the mixer, 01 handle used with the cylinder, 01 extension pipe to avoid direct contact with X-rays. Pump system Equipped with safety valve, activated upon pressure inside the cylinder is too high or the pump is pushing too fast. Cement measuring and controlling pump set with high pumping pressure (120 bars) Maximum pumping capacity of more than 10cc. Standards: ISO, CE, FSC

Tra Vinh General Hospital

Biological cement with HV-R phase solution

250

Female

Biocement with mixing solution includes: Cement powder: 20g of powdered sterilized cement with Barium sulphate 30%, Methyl methacrylate-Styrence-copolymer 68%, Benzonyl peroxide 2%. Solution: 9g liquid in sterile vial with ingredients Methyl methacrylate (mono-mer): 99.1%, N, N-dimethyl-p-toluidine: 0.9%, Hydroquinone 75ppm. High viscosity cement, Opaque: 30% Barium Sulfate Working time about 8 minutes at 22⁰C. Standards: ISO, FDA

Tra Vinh General Hospital

Kim poked the lifestyle drill

5

Female

Materials: Stainless steel, medical plastic and polycarbonate. Needle for puncture and drilling of the vertebral body size 3, size 8 gauge. Includes: 01 barrel inside the Trocar tube, 02 hollow Trocar tubes with outer diameter ≥ 4.19 mm, with graduation lines on the body ≤ 120 mm, 02 blunt needles, 02 sharp needles, 01 spine drill bit with graduation lines showing the depth into the spine body on the drill body Standards: ISO,FDA

Tra Vinh General Hospital

Needle biopsy

5

Female

Materials: Alloy and medical plastic, Size 3. Standards: ISO,FDA

Tra Vinh General Hospital

The cervical spine disc first

10

Female

- Material: MRI compatible PEEK. - Convex design simulates the anatomy of the cervical spine, 2 windows for bone grafting or bone replacement. - Self-retaining teeth to grip the end plates tightly - Outward anti-slip groove and bottom latch to prevent the risk of cage movement or rotate and push off - 3 x-ray tantalum markers to control cage position. - Aseptic packaging for cases helps reduce aseptic burden and capacity infection - Available in height sizes: 4, 5, 6, 7, 8mm. - Depth: 12mm and 14mm; Width: 14mm and 16mm Physiological curvature of the spine: 0°, 4°, 6°. * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

Vertical bar

10

Female

- Material: Titanium Alloy - Diameter: 5.5mm and 6.0mm, length from 40mm - 500mm. * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

Distance piece

5

Female

- Material: Titanium alloy Ti6Al4V ELI - Length from 40mm - 60mm and 60mm - 80mm - 5.5mm and 6.0mm rod connection, length-adjustable curved connector, two C-shaped curved hook ends help ensure stable connection - Can be adjusted in many planes to fit a variety of spinal anatomies * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

Multi -axis screws of the spine

80

Female

1. Screw: - Material: Titanium alloy Ti6Al4V ELI - Diameter: 3.5mm to 8.0mm (in 0.5mm increments) - 45° rotation angle provides flexibility during surgery - Tight-fitting screw head designed for good control - Screw length ranges from 25mm-100mm, depending on screw diameter - Compatible with 5.5mm and 6.0mm rods - Automatic 3-taro - Titanium screw heads are color coded according to screw diameter 2. Internal locking screw: - Fits all types of multi-axis fixing screws, multi-axis reducing screws and 5.5mm, 6.0mm rod connectors - Made from Ti-6Al-4V - Designed to reduce cross-thread rate * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

Single-axis screw with cement injection stabilizes the lumbar spine

20

Female

1. Screw: - Material: Titanium alloy Ti6Al4V ELI - Diameter: 5.5mm to 7.5mm (in 0.5mm increments) - Friction screw head designed for excellent control - Screw length ranges from 30mm-55mm, depending on screw diameter - Compatible with 5.5mm and 6.0mm rods - 6 holes to inject cement directly into the vertebral body. - Automatic 3-taro. - Titanium screw heads are color coded according to screw diameter. 2. Internal locking screw: - Suitable for all types of uniaxial fixing screws, uniaxial reducing screws and 5.5mm, 6.0mm rod connectors - Made of Ti-6Al-4V - Designed to reduce cross-thread rate * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

Screw the neck brace in front

10

Female

- Material: Ti6Al4V ELI - Titanium alloy - Length from 12mm - 20mm (in 2mm increments) - Diameter 4.0mm, 4.5mm - Self-drilling screw head, synchronized with the front neck brace * ISO 13485, EC and FSC standards

Tra Vinh General Hospital

1-layer brace

5

Female

Pre-bent single-layer anterior neck brace. Titanium alloy TA6V material, has 4 holes, 1.8mm thick, 17mm widest part, length 21mm-31mm (5mm increments) ISO quality standards; CE and CFS

Tra Vinh General Hospital

2-layer brace

5

Female

Pre-bent two-layer front neck brace. Titanium alloy TA6V material, has 6 holes, 1.8mm thick, 17mm widest part, length 36mm-51mm (5mm increments) ISO quality standards; CE and CFS

Tra Vinh General Hospital

3-layer brace

5

Female

Pre-bent three-layer anterior neck brace. Titanium alloy TA6V material, has 8 holes, 1.8mm thick, 17mm widest part, length 56mm-76mm (5mm increments) ISO quality standards; CE; CFSISO quality standards; CE and CFS

Tra Vinh General Hospital

4-layer brace

5

Female

Pre-bent four-layer anterior neck brace. Titanium alloy TA6V material, has 10 holes, 1.8mm thick, 17mm widest part, length 81mm-101mm (5mm increments) ISO quality standards; CE and CFS

Tra Vinh General Hospital

Cervical spine screws first

30

Female

Material Titanium alloy TA6V, Screw diameter 4mm - 4.5mm, length 10mm-22mm (2mm increments), self-drilling/self-tapping. ISO quality standards; CE and CFS

Tra Vinh General Hospital

Curved lumbar disc graft

10

Female

PEEK-OPTIMA material, curved, with conical needle-shaped teeth on the body to improve implant stability. There are three tantalum markers. curvature 4°, 9°, length 25mm, 30mm and 35mm; 11mm and 13mm wide; height 7-14mm (1mm increments). ISO quality standards; CE and CFS

Tra Vinh General Hospital