Contact Us
- 0904.634.288, 024.8888.4288
- [email protected]
- Facebook Fanpage: http://fb.com/dauthau.info
- Messenger: http://m.me/dauthau.info
Contact Us
-- You will be rewarded if you detect false warnings! See instructions here!
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent. To download, please Login or Register
Downloading files directly on the new Public Procurement System requires a computer using the Windows operating system and needs to install Client Agent software (Linux and MacOS cannot download Client software yet). ). Therefore, to be able to download files on smartphones, tablets or computers using operating systems other than Windows, you need to use our DauThau.info.
Our system will help you download files faster, on any device without installing Client Agent.
To download, please Login or Register
Number | Job Description Bidding | Amount | Calculation Unit | Technical requirements/Main technical instructions | Note |
---|---|---|---|---|---|
1 | Bơm nước thải nhúng chìm Loại: dùng cho nước thải pH thấp Đặc tính kỹ thuật: Loại: dùng cho nước thải pH thấp - Kiểu: Bơm chìm - Lưu lượng: 5m3/h, H = 12mH2O - Công suất: 0,75kW; 200V/3pha/50Hz; - Đầu bơm: đường kính DN50mm Các chế độ bảo vệ bơm: - Làm kín motor bằng seal (phốt) cơ khí đôi.Silicon Carbide/Silicon Carbide - Cấp độ bảo vệ: IP68 - Chuẩn cách nhiệt của động cơ: lớp F Vật liệu cấu tạo chính: - Thân: Stainless Steel AISI 316 - Cánh: Stainless Steel AISI 316L | 4 | Bộ | ||
2 | Khớp nối bơm tự động - Vật liệu: Inox 304 | 4 | Bộ | ||
3 | Thanh trượt + xích kéo Vật liệu: Inox 304 | 18 | Bộ | ||
4 | Biến tần điều khiển bơm công suất 0,75 kW - Điện áp: 380V/3pha/50Hz | 4 | Bộ | ||
5 | Phao kiểm soát mức nước - Kiểu: Phao mực nước dùng cho nước thải - Cấp độ bảo vệ: IP68 - Áp lực chịu được: 1 Bar | 2 | Bộ | ||
6 | Đồng hồ đo lưu lượng - Loại Remote - Đường kính: DN50 - Chiều dài cáp: 10m - Lớp lót: Polypropylene - Điện cực: Stainless steel 316Ti (1.4571) - Cấp bảo vệ: IP 68 cho sensor, IP 67 cho transmitter - Nguồn cấp: 24 VAC/ DC, 50 Hz- Tín hiệu ra: HART 4 - 20 mA | 2 | Bộ | ||
7 | Ống trộn hóa chất - Vật liệu: Inox 304 | 4 | Bộ | ||
8 | Máy thổi khí - Kiểu: root - Lưu lượng: 3 m3/phút x 50 kPa - Đường kính đầu thổi: DN80 - Điện năng: 7,5 kW Vật liệu cấu tạo chính: - Rotor, stator: gang dẻo FCD 450 - Thân máy chính, nắp hộp số trước và sau thân máy: gang FC 250 - Kèm theo: - 01 Máy chính; Giảm âm đầu hút; Van 1 chiều; Van an toàn; Khung đế; Pully motor; Pully đầu thổi; dây curoa; Belt cover; Khớp nối mềm; Đồng hồ áp suất. | 6 | Bộ | ||
9 | Máy thổi khí - Kiểu: root - Lưu lượng: 1,4 m3/phút x 40 kPa - Đường kính đầu thổi: DN80 - Điện năng: 3,0kW Vật liệu cấu tạo chính: - Rotor, stator làm bằng gang dẻo (Ductile cast iron) loại FCD 450 - Thân máy chính, nắp hộp số trước và sau thân máy bằng gang FC 250 Kèm theo: - 01 Máy chính; Giảm âm đầu hút; Van 1 chiều; Van an toàn; Khung đế; Pully motor; Pully đầu thổi; dây curoa; Belt cover; Khớp nối mềm; Đồng hồ áp suất. | 2 | Bộ | ||
10 | Biến tần điều khiển máy thổi khí công suất 7,5kW - Điện áp: 380V/3pha/50Hz | 2 | Bộ | ||
11 | Biến tần điều khiển máy thổi khí công suất 3kW - Điện áp: 380V/3pha/50Hz | 2 | Bộ | ||
12 | Ống phân phối khí đục lỗ - Vật liệu: uPVC | 2 | Hệ | ||
13 | Bộ hiển thị pH Trọn bộ bao gồm: Bộ hiển thị: - Dải đo: pH: - 2,00 to 16,00 pH - Độ phân giải: pH: 0.01 pH - Độ chính xác: pH: ± 0,01 pH ± 1 LSD - Output: 4 to 20 mA; - Nguồn cấp: 230V AC, 50Hz - Cấp độ bảo vệ: IP65 Điện cực pH: - Vật liệu thân: Ryton® Polyphenylene Sulfide (PPS). Ghi chú: Dùng để điều khiển trực tiếp; không hoặc thông qua PLC. | 4 | Bộ | ||
14 | Bơm định lượng NaOH, Axit - Kiểu: bơm định lượng loại màng - Qmax= 61,5l/h; Pmax= 5bar - Nguồn điện: 380V/50Hz/3pha; 0,04kW - Vật liệu: Đầu bơm: PVC Màng bơm: PTFE | 20 | Bộ | ||
15 | Van điện dùng cho hóa chất - Kiểu: van bi điều khiển điện dùng cho hóa chất - Kích thước DN34 | 4 | Bộ | ||
16 | Bồn hóa chất - Dung tích: V = 1000l - Vât liệu: Composite | 6 | Bộ | ||
17 | Bộ cánh khuấy hóa chất - Vật liệu: Inox 304 | 2 | Bộ | ||
18 | Đĩa phân phối khí tinh - Kiểu: Đĩa, Bọt mịn - Lưu lượng thiết kế: 0 – 9,5 m3/hr - Đường kính tổng: 273mm - Đầu nối: Ren 27mm Vật liệu: - Màng: EPDM - Khung: GFPP | 37 | Bộ | ||
19 | Thiết bị đo chỉ tiêu DO Trọn bộ bao gồm: Bộ hiển thị: - Dải đo: 0,0 – 60,0 mg/l - Độ phân giải: 0.01 mg/l - Độ chính xác: ±0,2% FS - Màn hình: LCD, có password - Tín hiệu xuất: 4-20mA - Control Type: 5 ON/OFF controls(*) - Cấp độ bảo vệ: IP 65 Điện cực DO: - Dải đo: 0÷40 mg/L. - Cáp chuẩn dài 5 mét Ghi chú: (*) Dùng để điều khiển trực tiếp; không hoặc thông qua PLC. | 2 | Bộ | ||
20 | Phao báo mức bồn hóa chất - Dạng: đo mức siêu âm - Tín hiệu xuất: Analog 0/4-20mA - Kiểu lắp: Chuẩn kết nối M20x1,5 - Vật liệu vỏ: PBT - Truyền thông: Hart | 4 | Bộ | ||
21 | Khuấy chìm bể anoxic Đặc tính kỹ thuật: - Kiểu: Khuấy chìm - Động cơ: 0,7kW - Tiêu chuẩn motor: IE3 - Cấp độ bảo vệ: IP68 - Chuẩn cách điện: lớp H (chịu nhiệt đến 180oC) - Vật liệu: Cánh: Inox AISI 316 Motor: Gang EN-GJL-250 Trục: Inox AISI 431 Seal cơ khí: silicon carbide | 4 | Bộ | ||
22 | Bơm chìm nước thải tuần hoàn Đặc tính kỹ thuật: - Kiểu: Bơm chìm - Lưu lượng: 10 m3/h, H=6 mH2O - Điện áp: 380V/3pha/50Hz, 0,55 kW - Đầu bơm: đường kính DN50 - Làm kín bằng 2 seals cơ khí: 1 silicon carbide (SiC) và 1 alumina graphite (AL) - Cấp bảo vệ motor: IP 68 - Chuẩn cách điện: lớp F - Vật liệu: Thân bơm, cánh bơm: Cast iron EN-GJL 250 Trục: Stainless steel AISI 431 | 10 | Bộ | ||
23 | Khớp nối bơm tự động - Vật liệu: Gang | 10 | Bộ | ||
24 | Đồng hồ đo lưu lượng cơ - Kiểu: đồng hồ cơ - DN40 - Vật liệu: Gang | 2 | Bộ | ||
25 | Đĩa phân phối khí thô Thông số kỹ thuật: - Kiểu: Đĩa (Disc), Bọt thô (Coarse bubble) - Lưu lượng: 1,6 - 13 m3/hr - Đường kính: 127 mm (5 inches) - Đầu nối: ren 27mm Vật liệu: - Màng: EPDM - Khung: ABS | 8 | Bộ | ||
26 | Hệ bồn công nghệ xử lý nước thải - Kích thước: DxH=3,0x13,5m - Vật liệu: Composite (FRP) | 1 | Hệ thống | ||
27 | Hệ bồn công nghệ xử lý nước thải - Kích thước: DxH=3,0x9,5m - Vật liệu: Composite (FRP) | 1 | Hệ thống | ||
28 | Hệ thống thang thao tác - Kích thước: cao 3,5m rộng 0,4m - Hai thanh chính hai bên DN32 dày 2mm - Các thanh giữa DN25 dày 2mm, khoảng cách giữa các thanh 300mm. - Chân cố định xuống sàn: 100x100mm dày 3mm - Vật liệu: Inox 304 | 8 | Cái | ||
29 | Cung cấp và lắp đặt biến áp cách ly 1P4Ngõ - 1000 VA Đầu vào: 12 220/380V đầu ra : 24/220V | 2 | Bộ | ||
30 | Cung cấp và lắp đặt Đồng hồ đo Voltage, Ampere đa năng | 2 | Cái | ||
31 | Cung cấp và lắp đặt Biến dòng CT 100/5 | 6 | Bộ | ||
32 | Cung cấp và lắp đặt CPU 1214C (14 DI 24V DC; 10 DO Relay; 2 AI), PS 24V DC | 2 | Cái | ||
33 | Cung cấp và lắp đặt Digital I/O, 16 DI, 24V DC / 16 DO, relay | 4 | Cái | ||
34 | Cung cấp và lắp đặt Digital input, 16 DI, 24V DC: 04 | 4 | Cái | ||
35 | Cung cấp và lắp đặt Analog Input SM 1231, 4AI | 4 | Cái | ||
36 | Cung cấp và lắp đặt Analog Output SM 1232, 2AO | 2 | Cái | ||
37 | Cung cấp và lắp đặt Màn hình HMI 4 inch BASIC | 2 | Cái | ||
38 | Lập trình PLC + HMI | 2 | Cái | ||
39 | Cung cấp và lắp đặt Thiết bị ngắt hiện trường | 30 | Bộ | ||
40 | Cung cấp và lắp đặt Tủ chiếu sáng | 2 | Tủ | ||
41 | Gia công lắp dựng cốt thép trong bê tông các loại | 7.5103 | Tấn | ||
42 | Ván khuôn gỗ | 303.42 | m2 | ||
43 | Đổ bê tông, đá 1x2, mác 250 | 47.492 | m3 | ||
44 | Bê tông móng, đá 1x2, vữa BT mác 150 | 13.988 | m3 | ||
45 | Xây tô, trát tường và nền, vữa XM mác 75 | 276.088 | m3 | ||
46 | Bả bằng bột bả vào tường, cột, dầm, trần | 211.76 | m2 | ||
47 | Sơn dầm, trần, cột, tường ngoài nhà đã bả bằng sơn các loại, 1 nước lót, 2 nước phủ | 211.76 | m2 | ||
48 | Quét dung dịch chống thấm mái, tường, sê nô, ô văng,… | 49.68 | m2 | ||
49 | Lắp đặt ống nhựa miệng bát nối bằng phương pháp dán keo, đoạn ống dài 6m, đường kính ống 89mm | 28 | m | ||
50 | Lắp đặt quả cầu chắn rác | 8 | Cái |
Data analysis results of DauThau.info software for bid solicitors NHÀ MÁY NHIỆT ĐIỆN VĨNH TÂN 4 - CHI NHÁNH TẬP ĐOÀN ĐIỆN LỰC VIỆT NAM as follows:
- Has relationships with 281 contractor.
- The average number of contractors participating in each bidding package is: 2.27 contractors.
- Proportion of bidding fields: Goods 40.72%, Construction 8.14%, Consulting 15.96%, Non-consulting 35.18%, Mixed 0.00%, Other 0%.
- The total value according to the bidding package with valid IMP is: 1,118,245,296,733 VND, in which the total winning value is: 1,039,799,564,726 VND.
- The savings rate is: 7.02%.
If you are still not our member, please sign up.You can use your account on DauThau.info to log in to Dauthau.Net, and vice versa!
Only 5 minutes and absolutely free! Your account can be use on all over our ecosystem, including DauThau.info and DauThau.Net.
Security Code
Similar goods purchased by Bid solicitor VINH TAN 4 THERMAL POWER PLANT:
No similar goods purchased by the soliciting party were found.
Similar goods purchased by other Bid solicitors excluding VINH TAN 4 THERMAL POWER PLANT:
No similar goods have been found that other Bid solicitors have purchased.
Similar goods for which the bidding results of the Ministry of Health have been announced:
No similar goods have been found in the bidding results of the Ministry of Health.